jackcartersmith/blackmagic
1
0
Fork 0
Code Issues Pull Requests Releases Activity

stm32f3: adc: drop unimplemented dead code.

Browse Source 
These functions have existed since the initial commit, fallout from
copying an existing file and then trying to implement functions as
needed.  F3 ADC doesn't have corresponding functions for some of these,
and this dead code should never have landed.  Dropping it for clarity,
and also to stop confusing doxygen.
This commit is contained in:
Karl Palsson 2016-08-18 18:23:14 +00:00 committed by Karl Palsson
parent 74b228f3a8
commit 0869e15718
1 changed files with 0 additions and 66 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

66
lib/stm32/f3/adc.c
View File

@ -295,38 +295,6 @@ void adc_enable_analog_watchdog_on_selected_channel(uint32_t adc,
ADC_CFGR1(adc) |= ADC_CFGR1_AWD1SGL;
}
/*---------------------------------------------------------------------------*/
/** @brief ADC Set Scan Mode
*
* In this mode a conversion consists of a scan of the predefined set of
* channels, regular and injected, each channel conversion immediately
* following the previous one. It can use single, continuous or discontinuous
* mode.
*
* @param[in] adc Unsigned int32. ADC block register address base @ref
* adc_reg_base
*/
/*
void adc_enable_scan_mode(uint32_t adc)
{
ADC_CR1(adc) |= ADC_CR1_SCAN;
}
*/
/*---------------------------------------------------------------------------*/
/** @brief ADC Disable Scan Mode
*
* @param[in] adc Unsigned int32. ADC block register address base @ref
* adc_reg_base
*/
/*
void adc_disable_scan_mode(uint32_t adc)
{
ADC_CR1(adc) &= ~ADC_CR1_SCAN;
}
*/
/*---------------------------------------------------------------------------*/
/** @brief ADC Enable Injected End-Of-Conversion Interrupt
@ -723,40 +691,6 @@ void adc_disable_external_trigger_injected(uint32_t adc)
ADC_JSQR(adc) &= ~ADC_JSQR_JEXTEN_MASK;
}
/*---------------------------------------------------------------------------*/
/** @brief ADC Set DMA to Continue
*
* This must be set to allow DMA to continue to operate after the last
* conversion in the DMA sequence. This allows DMA to be used in continuous
* circular mode.
*
* @param[in] adc Unsigned int32. ADC block register address base @ref
* adc_reg_base
*/
/*
void adc_set_dma_continue(uint32_t adc)
{
ADC_CR2(adc) |= ADC_CR2_DDS;
}
*/
/*---------------------------------------------------------------------------*/
/** @brief ADC Set DMA to Terminate
*
* This must be set to allow DMA to terminate after the last conversion in the
* DMA sequence. This can avoid overrun errors.
*
* @param[in] adc Unsigned int32. ADC block register address base
* @ref adc_reg_base
*/
/*
void adc_set_dma_terminate(uint32_t adc)
{
ADC_CR2(adc) &= ~ADC_CR2_DDS;
}
*/
/*---------------------------------------------------------------------------*/
/** @brief ADC Read the Analog Watchdog Flag