vf6xx: initial GPIO support

This adds GPIO module support. GPIO can be controlled using the GPIO
number as stated in the reference manual, similar to Linux. Also
32-bit access to whole ports is possible. Reading a GPIO is possible
without muxing the pad as GPIO, however writing a GPIO needs the pad
to be muxed as GPIO.

include/libopencm3/vf6xx/gpio.h

@@ -0,0 +1,80 @@
+/** @defgroup VF6xx_gpio_defines GPIO Defines
+ *
+ * @brief <b>Defined Constants and Types for the VF6xx GPIO Module</b>
+ *
+ * @ingroup VF6xx_defines
+ *
+ * @version 1.0.0
+ *
+ * @author @htmlonly &copy; @endhtmlonly 2014
+ * Stefan Agner <stefan@agner.ch>
+ *
+ * @date 03 July 2014
+ *
+ * LGPL License Terms @ref lgpl_license
+ *  */
+/*
+ * This file is part of the libopencm3 project.
+ *
+ * Copyright (C) 2014 Stefan Agner <stefan@agner.ch>
+ *
+ * This library is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU Lesser General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU Lesser General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public License
+ * along with this library.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef LIBOPENCM3_VF6XX_GPIO_H
+#define LIBOPENCM3_VF6XX_GPIO_H
+
+#include <libopencm3/cm3/common.h>
+#include <libopencm3/vf6xx/memorymap.h>
+
+/* --- Convenience macros -------------------------------------------------- */
+
+/****************************************************************************/
+/** @defgroup gpio_reg_base GPIO register base addresses
+@ingroup VF6xx_gpio_defines
+
+@{*/
+#define GPIO(port)			(GPIO_BASE + (0x040 * (port)))
+#define GPIO0				(GPIO_BASE + 0x000)
+#define GPIO1				(GPIO_BASE + 0x040)
+#define GPIO2				(GPIO_BASE + 0x080)
+#define GPIO3				(GPIO_BASE + 0x0C0)
+#define GPIO4				(GPIO_BASE + 0x100)
+
+#define GPIO_OFFSET(gpio)		(0x1 << (gpio % 32))
+
+/* --- GPIO registers ------------------------------------------------------ */
+
+#define GPIO_PDOR(gpio_base)		MMIO32(gpio_base + 0x00)
+#define GPIO_PSOR(gpio_base)		MMIO32(gpio_base + 0x04)
+#define GPIO_PCOR(gpio_base)		MMIO32(gpio_base + 0x08)
+#define GPIO_PTOR(gpio_base)		MMIO32(gpio_base + 0x0C)
+#define GPIO_PDIR(gpio_base)		MMIO32(gpio_base + 0x10)
+
+/* --- Function prototypes ------------------------------------------------- */
+
+#include <libopencm3/cm3/common.h>
+
+BEGIN_DECLS
+
+void gpio_set(uint32_t gpio);
+void gpio_clear(uint32_t gpio);
+bool gpio_get(uint32_t gpio);
+void gpio_toggle(uint32_t gpio);
+uint32_t gpio_port_read(uint32_t gpioport);
+void gpio_port_write(uint32_t gpioport, uint32_t data);
+
+END_DECLS
+
+#endif

include/libopencm3/vf6xx/memorymap.h

@@ -52,4 +52,7 @@
 #define UART4_BASE			(PERIPH_BASE_AIPS1 + 0x29000)
 #define UART5_BASE			(PERIPH_BASE_AIPS1 + 0x2A000)
 
+/* GPIO module */
+#define GPIO_BASE			(PERIPH_BASE + 0xff000)
+
 #endif

lib/vf6xx/Makefile

@@ -34,7 +34,7 @@ CFLAGS		= -Os -g \
 		  -mcpu=cortex-m4 -mthumb $(FP_FLAGS) -Wstrict-prototypes \
 		  -ffunction-sections -fdata-sections -MD -DVF6XX
 ARFLAGS		= rcs
-OBJS		= ccm.o uart.o
+OBJS		= ccm.o uart.o gpio.o
 
 VPATH += ../cm3
 

lib/vf6xx/gpio.c

@@ -0,0 +1,131 @@
+/** @defgroup VF6xx_gpio GPIO
+ *
+ * @ingroup VF6xx
+ *
+ * @section vf6xx_gpio_api_ex GPIO API.
+ *
+ * @brief <b>VF6xx General-Purpose Input/Output (GPIO)</b>
+ *
+ * @author @htmlonly &copy; @endhtmlonly 2014 Stefan Agner <stefan@agner.ch>
+ *
+ * @date 03 July 2014
+ *
+ * This library supports the GPIO module in the VF6xx SoC of Freescale.
+ * Access is provided by GPIO number according to the Pinmux list of the
+ * Reference Manual, similar as GPIOs are available on Linux.
+ *
+ * LGPL License Terms @ref lgpl_license
+ */
+/*
+ * This file is part of the libopencm3 project.
+ *
+ * Copyright (C) 2014 Stefan Agner <stefan@agner.ch>
+ *
+ * This library is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU Lesser General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU Lesser General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public License
+ * along with this library.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+/**@{*/
+
+#include <libopencm3/vf6xx/gpio.h>
+#include <libopencm3/vf6xx/ccm.h>
+
+/*---------------------------------------------------------------------------*/
+/** @brief Set GPIO
+
+Set GPIO by GPIO number according to MUX list
+
+@param[in] gpio unsigned 32 bit. GPIO number
+*/
+
+void gpio_set(uint32_t gpio)
+{
+	uint32_t port = GPIO(gpio / 32);
+	GPIO_PSOR(port) = GPIO_OFFSET(gpio);
+}
+
+/*---------------------------------------------------------------------------*/
+/** @brief Set GPIO
+
+Clears GPIO by GPIO number according to MUX list
+
+@param[in] gpio unsigned 32 bit. GPIO number
+*/
+
+void gpio_clear(uint32_t gpio)
+{
+	uint32_t port = GPIO(gpio / 32);
+	GPIO_PCOR(port) = GPIO_OFFSET(gpio);
+}
+
+/*---------------------------------------------------------------------------*/
+/** @brief Get GPIOs logic state
+
+Get logic level of GPIO given by GPIO number according to MUX list. Reading
+a GPIO value is possible even if the port is not muxed for GPIO.
+
+@param[in] gpio unsigned 32 bit. GPIO number
+@returns the logic state of the given GPIO.
+*/
+
+bool gpio_get(uint32_t gpio)
+{
+	uint32_t port = GPIO(gpio / 32);
+	return !!(GPIO_PDIR(port) & GPIO_OFFSET(gpio));
+}
+
+/*---------------------------------------------------------------------------*/
+/** @brief Toggles GPIO
+
+Toggles GPIO by GPIO number according to MUX list
+
+@param[in] gpio unsigned 32 bit. GPIO number
+*/
+
+void gpio_toggle(uint32_t gpio)
+{
+	uint32_t port = GPIO(gpio / 32);
+	GPIO_PTOR(port) = GPIO_OFFSET(gpio);
+}
+
+/*---------------------------------------------------------------------------*/
+/** @brief Read a whole GPIO Port
+
+Gets all 32 GPIOs of a Port.
+
+@param[in] gpioport unsigned 32 bit. GPIO port @ref gpio_reg_base
+@returns the logic states of the given GPIO port.
+*/
+
+uint32_t gpio_port_read(uint32_t gpioport)
+{
+	return GPIO_PDIR(gpioport);
+}
+
+/*---------------------------------------------------------------------------*/
+/** @brief Write a whole GPIO Port
+
+Sets all 32 GPIOs of a Port.
+
+@param[in] gpioport unsigned 32 bit. GPIO port @ref gpio_reg_base
+@param[in] gpio unsigned 32 bit. 1 for a logic 1 driven at port, 0 for a logic
+0 driven at port.
+*/
+
+void gpio_port_write(uint32_t gpioport, uint32_t data)
+{
+	GPIO_PDOR(gpioport) = data;
+}
+
+/**@}*/
+