Add RCC and FLASH support for STM32F2
This commit is contained in:
Stephen Caudle
parent
8ceeb99902
commit
36cff03af1
@ -30,10 +30,12 @@ typedef int32_t s32;
|
||||
typedef uint8_t u8;
|
||||
typedef uint16_t u16;
|
||||
typedef uint32_t u32;
|
||||
typedef uint64_t u64;
|
||||
|
||||
/* Generic memory-mapped I/O accessor functions */
|
||||
#define MMIO8(addr) (*(volatile u8 *)(addr))
|
||||
#define MMIO16(addr) (*(volatile u16 *)(addr))
|
||||
#define MMIO32(addr) (*(volatile u32 *)(addr))
|
||||
#define MMIO64(addr) (*(volatile u64 *)(addr))
|
||||
|
||||
#endif
|
||||
|
||||
153
include/libopencm3/stm32/f2/flash.h
Normal file
153
include/libopencm3/stm32/f2/flash.h
Normal file
@ -0,0 +1,153 @@
|
||||
/*
|
||||
* This file is part of the libopencm3 project.
|
||||
*
|
||||
* Copyright (C) 2010 Thomas Otto <tommi@viadmin.org>
|
||||
* Copyright (C) 2010 Mark Butler <mbutler@physics.otago.ac.nz>
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
/*
|
||||
* For details see:
|
||||
* PM0042 Programming manual: STM32F10xxx Flash programming
|
||||
* October 2009, Doc ID 13259 Rev 7
|
||||
* http://www.st.com/stonline/products/literature/pm/13259.pdf
|
||||
*/
|
||||
|
||||
#ifndef LIBOPENCM3_FLASH_H
|
||||
#define LIBOPENCM3_FLASH_H
|
||||
|
||||
#include <libopencm3/stm32/memorymap.h>
|
||||
#include <libopencm3/cm3/common.h>
|
||||
|
||||
/* --- FLASH registers ----------------------------------------------------- */
|
||||
|
||||
#define FLASH_ACR MMIO32(FLASH_MEM_INTERFACE_BASE + 0x00)
|
||||
#define FLASH_KEYR MMIO32(FLASH_MEM_INTERFACE_BASE + 0x04)
|
||||
#define FLASH_OPTKEYR MMIO32(FLASH_MEM_INTERFACE_BASE + 0x08)
|
||||
#define FLASH_SR MMIO32(FLASH_MEM_INTERFACE_BASE + 0x0C)
|
||||
#define FLASH_CR MMIO32(FLASH_MEM_INTERFACE_BASE + 0x10)
|
||||
#define FLASH_OPTCR MMIO32(FLASH_MEM_INTERFACE_BASE + 0x14)
|
||||
|
||||
/* --- FLASH_ACR values ---------------------------------------------------- */
|
||||
|
||||
#define FLASH_DCRST (1 << 12)
|
||||
#define FLASH_ICRST (1 << 11)
|
||||
#define FLASH_DCE (1 << 10)
|
||||
#define FLASH_ICE (1 << 9)
|
||||
#define FLASH_PRFTEN (1 << 8)
|
||||
#define FLASH_LATENCY_0WS 0x00
|
||||
#define FLASH_LATENCY_1WS 0x01
|
||||
#define FLASH_LATENCY_2WS 0x02
|
||||
#define FLASH_LATENCY_3WS 0x03
|
||||
#define FLASH_LATENCY_4WS 0x04
|
||||
#define FLASH_LATENCY_5WS 0x05
|
||||
#define FLASH_LATENCY_6WS 0x06
|
||||
#define FLASH_LATENCY_7WS 0x07
|
||||
|
||||
/* --- FLASH_SR values ----------------------------------------------------- */
|
||||
|
||||
#define FLASH_BSY (1 << 16)
|
||||
#define FLASH_PGSERR (1 << 7)
|
||||
#define FLASH_PGPERR (1 << 6)
|
||||
#define FLASH_PGAERR (1 << 5)
|
||||
#define FLASH_WRPERR (1 << 4)
|
||||
#define FLASH_OPERR (1 << 1)
|
||||
#define FLASH_EOP (1 << 0)
|
||||
|
||||
/* --- FLASH_CR values ----------------------------------------------------- */
|
||||
|
||||
#define FLASH_LOCK (1 << 31)
|
||||
#define FLASH_ERRIE (1 << 25)
|
||||
#define FLASH_EOPIE (1 << 24)
|
||||
#define FLASH_STRT (1 << 16)
|
||||
#define FLASH_MER (1 << 2)
|
||||
#define FLASH_SER (1 << 1)
|
||||
#define FLASH_PG (1 << 0)
|
||||
#define FLASH_SECTOR_0 (0x00 << 3)
|
||||
#define FLASH_SECTOR_1 (0x01 << 3)
|
||||
#define FLASH_SECTOR_2 (0x02 << 3)
|
||||
#define FLASH_SECTOR_3 (0x03 << 3)
|
||||
#define FLASH_SECTOR_4 (0x04 << 3)
|
||||
#define FLASH_SECTOR_5 (0x05 << 3)
|
||||
#define FLASH_SECTOR_6 (0x06 << 3)
|
||||
#define FLASH_SECTOR_7 (0x07 << 3)
|
||||
#define FLASH_SECTOR_8 (0x08 << 3)
|
||||
#define FLASH_SECTOR_9 (0x09 << 3)
|
||||
#define FLASH_SECTOR_10 (0x0a << 3)
|
||||
#define FLASH_SECTOR_11 (0x0b << 3)
|
||||
#define FLASH_PROGRAM_X8 (0x00 << 8)
|
||||
#define FLASH_PROGRAM_X16 (0x01 << 8)
|
||||
#define FLASH_PROGRAM_X32 (0x02 << 8)
|
||||
#define FLASH_PROGRAM_X64 (0x03 << 8)
|
||||
|
||||
/* --- FLASH_OPTCR values -------------------------------------------------- */
|
||||
|
||||
/* FLASH_OPTCR[27:16]: nWRP */
|
||||
/* FLASH_OBR[15:8]: RDP */
|
||||
#define FLASH_NRST_STDBY (1 << 7)
|
||||
#define FLASH_NRST_STOP (1 << 6)
|
||||
#define FLASH_WDG_SW (1 << 5)
|
||||
#define FLASH_OPTSTRT (1 << 1)
|
||||
#define FLASH_OPTLOCK (1 << 0)
|
||||
#define FLASH_BOR_LEVEL_3 (0x00 << 2)
|
||||
#define FLASH_BOR_LEVEL_2 (0x01 << 2)
|
||||
#define FLASH_BOR_LEVEL_1 (0x02 << 2)
|
||||
#define FLASH_BOR_OFF (0x03 << 2)
|
||||
|
||||
/* --- FLASH Keys -----------------------------------------------------------*/
|
||||
|
||||
#define FLASH_KEY1 ((u32)0x45670123)
|
||||
#define FLASH_KEY2 ((u32)0xcdef89ab)
|
||||
#define FLASH_OPTKEY1 ((u32)0x08192a3b)
|
||||
#define FLASH_OPTKEY2 ((u32)0x4c5d6e7f)
|
||||
|
||||
/* --- Function prototypes ------------------------------------------------- */
|
||||
|
||||
void flash_dcache_enable(void);
|
||||
void flash_dcache_disable(void);
|
||||
void flash_icache_enable(void);
|
||||
void flash_icache_disable(void);
|
||||
void flash_prefetch_enable(void);
|
||||
void flash_prefetch_disable(void);
|
||||
void flash_dcache_reset(void);
|
||||
void flash_icache_reset(void);
|
||||
void flash_set_ws(u32 ws);
|
||||
void flash_unlock(void);
|
||||
void flash_lock(void);
|
||||
void flash_clear_pgserr_flag(void);
|
||||
void flash_clear_pgperr_flag(void);
|
||||
void flash_clear_pgaerr_flag(void);
|
||||
void flash_clear_eop_flag(void);
|
||||
void flash_clear_wrperr_flag(void);
|
||||
void flash_clear_bsy_flag(void);
|
||||
void flash_clear_status_flags(void);
|
||||
void flash_unlock_option_bytes(void);
|
||||
void flash_lock_option_bytes(void);
|
||||
void flash_erase_all_sectors(u32 program_size);
|
||||
void flash_erase_sector(u32 sector, u32 program_size);
|
||||
void flash_program_double_word(u32 address, u64 data, u32 program_size);
|
||||
void flash_program_word(u32 address, u32 data, u32 program_size);
|
||||
void flash_program_half_word(u32 address, u16 data, u32 program_size);
|
||||
void flash_program_byte(u32 address, u8 data, u32 program_size);
|
||||
void flash_wait_for_last_operation(void);
|
||||
void flash_program_option_bytes(u32 data);
|
||||
|
||||
#if 0
|
||||
// TODO: Implement support for option bytes
|
||||
void flash_erase_option_bytes(void);
|
||||
void flash_program_option_bytes(u32 address, u16 data);
|
||||
#endif
|
||||
|
||||
#endif
|
||||
@ -449,5 +449,44 @@
|
||||
/* RCC_PLLI2SCFGR[14:6]: PLLI2SN */
|
||||
#define RCC_PLLI2SCFGR_PLLI2SN_SHIFT 6
|
||||
|
||||
/* --- Variable definitions ------------------------------------------------ */
|
||||
extern u32 rcc_ppre1_frequency;
|
||||
extern u32 rcc_ppre2_frequency;
|
||||
|
||||
/* --- Function prototypes ------------------------------------------------- */
|
||||
|
||||
typedef enum {
|
||||
PLL, HSE, HSI, LSE, LSI
|
||||
} osc_t;
|
||||
|
||||
void rcc_osc_ready_int_clear(osc_t osc);
|
||||
void rcc_osc_ready_int_enable(osc_t osc);
|
||||
void rcc_osc_ready_int_disable(osc_t osc);
|
||||
int rcc_osc_ready_int_flag(osc_t osc);
|
||||
void rcc_css_int_clear(void);
|
||||
int rcc_css_int_flag(void);
|
||||
void rcc_wait_for_osc_ready(osc_t osc);
|
||||
void rcc_wait_for_sysclk_status(osc_t osc);
|
||||
void rcc_osc_on(osc_t osc);
|
||||
void rcc_osc_off(osc_t osc);
|
||||
void rcc_css_enable(void);
|
||||
void rcc_css_disable(void);
|
||||
void rcc_osc_bypass_enable(osc_t osc);
|
||||
void rcc_osc_bypass_disable(osc_t osc);
|
||||
void rcc_peripheral_enable_clock(volatile u32 *reg, u32 en);
|
||||
void rcc_peripheral_disable_clock(volatile u32 *reg, u32 en);
|
||||
void rcc_peripheral_reset(volatile u32 *reg, u32 reset);
|
||||
void rcc_peripheral_clear_reset(volatile u32 *reg, u32 clear_reset);
|
||||
void rcc_set_sysclk_source(u32 clk);
|
||||
void rcc_set_pll_source(u32 pllsrc);
|
||||
void rcc_set_ppre2(u32 ppre2);
|
||||
void rcc_set_ppre1(u32 ppre1);
|
||||
void rcc_set_hpre(u32 hpre);
|
||||
void rcc_set_rtcpre(u32 rtcpre);
|
||||
void rcc_set_main_pll_hsi(u32 pllm, u32 plln, u32 pllp, u32 pllq);
|
||||
void rcc_set_main_pll_hse(u32 pllm, u32 plln, u32 pllp, u32 pllq);
|
||||
u32 rcc_get_system_clock_source(int i);
|
||||
void rcc_clock_setup_in_hse_8mhz_out_120mhz(void);
|
||||
void rcc_backupdomain_reset(void);
|
||||
|
||||
#endif
|
||||
|
||||
@ -28,7 +28,7 @@ CFLAGS = -Os -g -Wall -Wextra -I../../include -fno-common \
|
||||
-ffunction-sections -fdata-sections -MD -DSTM32F2
|
||||
# ARFLAGS = rcsv
|
||||
ARFLAGS = rcs
|
||||
OBJS = vector.o gpio.o systick.o i2c.o spi.o nvic.o usart.o
|
||||
OBJS = vector.o gpio.o systick.o i2c.o spi.o nvic.o usart.o rcc.o flash.o
|
||||
|
||||
#VPATH += ../usb
|
||||
VPATH += ../stm32_common
|
||||
|
||||
250
lib/stm32f2/flash.c
Normal file
250
lib/stm32f2/flash.c
Normal file
@ -0,0 +1,250 @@
|
||||
/*
|
||||
* This file is part of the libopencm3 project.
|
||||
*
|
||||
* Copyright (C) 2010 Thomas Otto <tommi@viadmin.org>
|
||||
* Copyright (C) 2010 Mark Butler <mbutler@physics.otago.ac.nz>
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#include <libopencm3/stm32/f2/flash.h>
|
||||
|
||||
static inline void flash_set_program_size(u32 psize)
|
||||
{
|
||||
FLASH_CR &= ~(((1 << 0) | (1 << 1)) << 8);
|
||||
FLASH_CR |= psize;
|
||||
}
|
||||
|
||||
void flash_data_cache_enable(void)
|
||||
{
|
||||
FLASH_ACR |= FLASH_DCE;
|
||||
}
|
||||
|
||||
void flash_dcache_disable(void)
|
||||
{
|
||||
FLASH_ACR &= ~FLASH_DCE;
|
||||
}
|
||||
|
||||
void flash_icache_enable(void)
|
||||
{
|
||||
FLASH_ACR |= FLASH_ICE;
|
||||
}
|
||||
|
||||
void flash_icache_disable(void)
|
||||
{
|
||||
FLASH_ACR &= ~FLASH_ICE;
|
||||
}
|
||||
|
||||
void flash_prefetch_enable(void)
|
||||
{
|
||||
FLASH_ACR |= FLASH_PRFTEN;
|
||||
}
|
||||
|
||||
void flash_prefetch_disable(void)
|
||||
{
|
||||
FLASH_ACR &= ~FLASH_PRFTEN;
|
||||
}
|
||||
|
||||
void flash_dcache_reset(void)
|
||||
{
|
||||
FLASH_ACR |= FLASH_DCRST;
|
||||
}
|
||||
|
||||
void flash_icache_reset(void)
|
||||
{
|
||||
FLASH_ACR |= FLASH_ICRST;
|
||||
}
|
||||
|
||||
void flash_set_ws(u32 ws)
|
||||
{
|
||||
u32 reg32;
|
||||
|
||||
reg32 = FLASH_ACR;
|
||||
reg32 &= ~((1 << 0) | (1 << 1) | (1 << 2));
|
||||
reg32 |= ws;
|
||||
FLASH_ACR = reg32;
|
||||
}
|
||||
|
||||
void flash_unlock(void)
|
||||
{
|
||||
/* Authorize the FPEC access. */
|
||||
FLASH_KEYR = FLASH_KEY1;
|
||||
FLASH_KEYR = FLASH_KEY2;
|
||||
}
|
||||
|
||||
void flash_lock(void)
|
||||
{
|
||||
FLASH_CR |= FLASH_LOCK;
|
||||
}
|
||||
|
||||
void flash_clear_pgserr_flag(void)
|
||||
{
|
||||
FLASH_SR |= FLASH_PGSERR;
|
||||
}
|
||||
|
||||
void flash_clear_pgperr_flag(void)
|
||||
{
|
||||
FLASH_SR |= FLASH_PGPERR;
|
||||
}
|
||||
|
||||
void flash_clear_pgaerr_flag(void)
|
||||
{
|
||||
FLASH_SR |= FLASH_PGAERR;
|
||||
}
|
||||
|
||||
void flash_clear_eop_flag(void)
|
||||
{
|
||||
FLASH_SR |= FLASH_EOP;
|
||||
}
|
||||
|
||||
void flash_clear_wrperr_flag(void)
|
||||
{
|
||||
FLASH_SR |= FLASH_WRPERR;
|
||||
}
|
||||
|
||||
void flash_clear_bsy_flag(void)
|
||||
{
|
||||
FLASH_SR &= ~FLASH_BSY;
|
||||
}
|
||||
|
||||
void flash_clear_status_flags(void)
|
||||
{
|
||||
flash_clear_pgserr_flag();
|
||||
flash_clear_pgperr_flag();
|
||||
flash_clear_pgaerr_flag();
|
||||
flash_clear_eop_flag();
|
||||
flash_clear_wrperr_flag();
|
||||
flash_clear_bsy_flag();
|
||||
}
|
||||
|
||||
void flash_unlock_option_bytes(void)
|
||||
{
|
||||
FLASH_OPTKEYR = FLASH_OPTKEY1;
|
||||
FLASH_OPTKEYR = FLASH_OPTKEY2;
|
||||
}
|
||||
|
||||
void flash_lock_option_bytes(void)
|
||||
{
|
||||
FLASH_OPTCR |= FLASH_OPTLOCK;
|
||||
}
|
||||
|
||||
void flash_wait_for_last_operation(void)
|
||||
{
|
||||
while ((FLASH_SR & FLASH_BSY) == FLASH_BSY)
|
||||
;
|
||||
}
|
||||
|
||||
void flash_program_double_word(u32 address, u64 data, u32 program_size)
|
||||
{
|
||||
/* Ensure that all flash operations are complete. */
|
||||
flash_wait_for_last_operation();
|
||||
flash_set_program_size(program_size);
|
||||
|
||||
/* Enable writes to flash. */
|
||||
FLASH_CR |= FLASH_PG;
|
||||
|
||||
/* Program the first half of the word. */
|
||||
MMIO64(address) = data;
|
||||
|
||||
/* Wait for the write to complete. */
|
||||
flash_wait_for_last_operation();
|
||||
|
||||
/* Disable writes to flash. */
|
||||
FLASH_CR &= ~FLASH_PG;
|
||||
}
|
||||
|
||||
void flash_program_word(u32 address, u32 data, u32 program_size)
|
||||
{
|
||||
/* Ensure that all flash operations are complete. */
|
||||
flash_wait_for_last_operation();
|
||||
flash_set_program_size(program_size);
|
||||
|
||||
/* Enable writes to flash. */
|
||||
FLASH_CR |= FLASH_PG;
|
||||
|
||||
/* Program the first half of the word. */
|
||||
MMIO32(address) = data;
|
||||
|
||||
/* Wait for the write to complete. */
|
||||
flash_wait_for_last_operation();
|
||||
|
||||
/* Disable writes to flash. */
|
||||
FLASH_CR &= ~FLASH_PG;
|
||||
}
|
||||
|
||||
void flash_program_half_word(u32 address, u16 data, u32 program_size)
|
||||
{
|
||||
flash_wait_for_last_operation();
|
||||
flash_set_program_size(program_size);
|
||||
|
||||
FLASH_CR |= FLASH_PG;
|
||||
|
||||
MMIO16(address) = data;
|
||||
|
||||
flash_wait_for_last_operation();
|
||||
|
||||
FLASH_CR &= ~FLASH_PG; /* Disable the PG bit. */
|
||||
}
|
||||
|
||||
void flash_program_byte(u32 address, u8 data, u32 program_size)
|
||||
{
|
||||
flash_wait_for_last_operation();
|
||||
flash_set_program_size(program_size);
|
||||
|
||||
FLASH_CR |= FLASH_PG;
|
||||
|
||||
MMIO8(address) = data;
|
||||
|
||||
flash_wait_for_last_operation();
|
||||
|
||||
FLASH_CR &= ~FLASH_PG; /* Disable the PG bit. */
|
||||
}
|
||||
|
||||
void flash_erase_sector(u32 sector, u32 program_size)
|
||||
{
|
||||
flash_wait_for_last_operation();
|
||||
flash_set_program_size(program_size);
|
||||
|
||||
FLASH_CR &= ~(((1 << 0) | (1 << 1) | (1 << 2) | (1 << 3)) << 3);
|
||||
FLASH_CR |= sector;
|
||||
FLASH_CR |= FLASH_STRT;
|
||||
|
||||
flash_wait_for_last_operation();
|
||||
FLASH_CR &= ~FLASH_SER;
|
||||
FLASH_CR &= ~(((1 << 0) | (1 << 1) | (1 << 2) | (1 << 3)) << 3);
|
||||
}
|
||||
|
||||
void flash_erase_all_sectors(u32 program_size)
|
||||
{
|
||||
flash_wait_for_last_operation();
|
||||
flash_set_program_size(program_size);
|
||||
|
||||
FLASH_CR |= FLASH_MER; /* Enable mass erase. */
|
||||
FLASH_CR |= FLASH_STRT; /* Trigger the erase. */
|
||||
|
||||
flash_wait_for_last_operation();
|
||||
FLASH_CR &= ~FLASH_MER; /* Disable mass erase. */
|
||||
}
|
||||
|
||||
void flash_program_option_bytes(u32 data)
|
||||
{
|
||||
flash_wait_for_last_operation();
|
||||
|
||||
if (FLASH_OPTCR & FLASH_OPTLOCK)
|
||||
flash_unlock_option_bytes();
|
||||
|
||||
FLASH_OPTCR = data & ~0x3;
|
||||
FLASH_OPTCR |= FLASH_OPTSTRT; /* Enable option byte programming. */
|
||||
flash_wait_for_last_operation();
|
||||
}
|
||||
412
lib/stm32f2/rcc.c
Normal file
412
lib/stm32f2/rcc.c
Normal file
@ -0,0 +1,412 @@
|
||||
/*
|
||||
* This file is part of the libopencm3 project.
|
||||
*
|
||||
* Copyright (C) 2009 Federico Ruiz-Ugalde <memeruiz at gmail dot com>
|
||||
* Copyright (C) 2009 Uwe Hermann <uwe@hermann-uwe.de>
|
||||
* Copyright (C) 2010 Thomas Otto <tommi@viadmin.org>
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#include <libopencm3/stm32/f2/rcc.h>
|
||||
#include <libopencm3/stm32/f2/flash.h>
|
||||
|
||||
/* Set the default ppre1 and ppre2 peripheral clock frequencies after reset */
|
||||
u32 rcc_ppre1_frequency = 8000000;
|
||||
u32 rcc_ppre2_frequency = 8000000;
|
||||
|
||||
/* TODO: Create a table for these values */
|
||||
#define RCC_PLL_M 8
|
||||
#define RCC_PLL_N 336
|
||||
#define RCC_PLL_P 2
|
||||
#define RCC_PLL_Q 7
|
||||
#define RCC_PLLI2S_N 192
|
||||
#define RCC_PLLI2S_R 5
|
||||
|
||||
void rcc_osc_ready_int_clear(osc_t osc)
|
||||
{
|
||||
switch (osc) {
|
||||
case PLL:
|
||||
RCC_CIR |= RCC_CIR_PLLRDYC;
|
||||
break;
|
||||
case HSE:
|
||||
RCC_CIR |= RCC_CIR_HSERDYC;
|
||||
break;
|
||||
case HSI:
|
||||
RCC_CIR |= RCC_CIR_HSIRDYC;
|
||||
break;
|
||||
case LSE:
|
||||
RCC_CIR |= RCC_CIR_LSERDYC;
|
||||
break;
|
||||
case LSI:
|
||||
RCC_CIR |= RCC_CIR_LSIRDYC;
|
||||
break;
|
||||
}
|
||||
}
|
||||
|
||||
void rcc_osc_ready_int_enable(osc_t osc)
|
||||
{
|
||||
switch (osc) {
|
||||
case PLL:
|
||||
RCC_CIR |= RCC_CIR_PLLRDYIE;
|
||||
break;
|
||||
case HSE:
|
||||
RCC_CIR |= RCC_CIR_HSERDYIE;
|
||||
break;
|
||||
case HSI:
|
||||
RCC_CIR |= RCC_CIR_HSIRDYIE;
|
||||
break;
|
||||
case LSE:
|
||||
RCC_CIR |= RCC_CIR_LSERDYIE;
|
||||
break;
|
||||
case LSI:
|
||||
RCC_CIR |= RCC_CIR_LSIRDYIE;
|
||||
break;
|
||||
}
|
||||
}
|
||||
|
||||
void rcc_osc_ready_int_disable(osc_t osc)
|
||||
{
|
||||
switch (osc) {
|
||||
case PLL:
|
||||
RCC_CIR &= ~RCC_CIR_PLLRDYIE;
|
||||
break;
|
||||
case HSE:
|
||||
RCC_CIR &= ~RCC_CIR_HSERDYIE;
|
||||
break;
|
||||
case HSI:
|
||||
RCC_CIR &= ~RCC_CIR_HSIRDYIE;
|
||||
break;
|
||||
case LSE:
|
||||
RCC_CIR &= ~RCC_CIR_LSERDYIE;
|
||||
break;
|
||||
case LSI:
|
||||
RCC_CIR &= ~RCC_CIR_LSIRDYIE;
|
||||
break;
|
||||
}
|
||||
}
|
||||
|
||||
int rcc_osc_ready_int_flag(osc_t osc)
|
||||
{
|
||||
switch (osc) {
|
||||
case PLL:
|
||||
return ((RCC_CIR & RCC_CIR_PLLRDYF) != 0);
|
||||
break;
|
||||
case HSE:
|
||||
return ((RCC_CIR & RCC_CIR_HSERDYF) != 0);
|
||||
break;
|
||||
case HSI:
|
||||
return ((RCC_CIR & RCC_CIR_HSIRDYF) != 0);
|
||||
break;
|
||||
case LSE:
|
||||
return ((RCC_CIR & RCC_CIR_LSERDYF) != 0);
|
||||
break;
|
||||
case LSI:
|
||||
return ((RCC_CIR & RCC_CIR_LSIRDYF) != 0);
|
||||
break;
|
||||
}
|
||||
|
||||
/* Shouldn't be reached. */
|
||||
return -1;
|
||||
}
|
||||
|
||||
void rcc_css_int_clear(void)
|
||||
{
|
||||
RCC_CIR |= RCC_CIR_CSSC;
|
||||
}
|
||||
|
||||
int rcc_css_int_flag(void)
|
||||
{
|
||||
return ((RCC_CIR & RCC_CIR_CSSF) != 0);
|
||||
}
|
||||
|
||||
void rcc_wait_for_osc_ready(osc_t osc)
|
||||
{
|
||||
switch (osc) {
|
||||
case PLL:
|
||||
while ((RCC_CR & RCC_CR_PLLRDY) == 0);
|
||||
break;
|
||||
case HSE:
|
||||
while ((RCC_CR & RCC_CR_HSERDY) == 0);
|
||||
break;
|
||||
case HSI:
|
||||
while ((RCC_CR & RCC_CR_HSIRDY) == 0);
|
||||
break;
|
||||
case LSE:
|
||||
while ((RCC_BDCR & RCC_BDCR_LSERDY) == 0);
|
||||
break;
|
||||
case LSI:
|
||||
while ((RCC_CSR & RCC_CSR_LSIRDY) == 0);
|
||||
break;
|
||||
}
|
||||
}
|
||||
|
||||
void rcc_wait_for_sysclk_status(osc_t osc)
|
||||
{
|
||||
switch (osc) {
|
||||
case PLL:
|
||||
while ((RCC_CFGR & ((1 << 1) | (1 << 0))) != RCC_CFGR_SWS_PLL);
|
||||
break;
|
||||
case HSE:
|
||||
while ((RCC_CFGR & ((1 << 1) | (1 << 0))) != RCC_CFGR_SWS_HSE);
|
||||
break;
|
||||
case HSI:
|
||||
while ((RCC_CFGR & ((1 << 1) | (1 << 0))) != RCC_CFGR_SWS_HSI);
|
||||
break;
|
||||
default:
|
||||
/* Shouldn't be reached. */
|
||||
break;
|
||||
}
|
||||
}
|
||||
|
||||
void rcc_osc_on(osc_t osc)
|
||||
{
|
||||
switch (osc) {
|
||||
case PLL:
|
||||
RCC_CR |= RCC_CR_PLLON;
|
||||
break;
|
||||
case HSE:
|
||||
RCC_CR |= RCC_CR_HSEON;
|
||||
break;
|
||||
case HSI:
|
||||
RCC_CR |= RCC_CR_HSION;
|
||||
break;
|
||||
case LSE:
|
||||
RCC_BDCR |= RCC_BDCR_LSEON;
|
||||
break;
|
||||
case LSI:
|
||||
RCC_CSR |= RCC_CSR_LSION;
|
||||
break;
|
||||
}
|
||||
}
|
||||
|
||||
void rcc_osc_off(osc_t osc)
|
||||
{
|
||||
switch (osc) {
|
||||
case PLL:
|
||||
RCC_CR &= ~RCC_CR_PLLON;
|
||||
break;
|
||||
case HSE:
|
||||
RCC_CR &= ~RCC_CR_HSEON;
|
||||
break;
|
||||
case HSI:
|
||||
RCC_CR &= ~RCC_CR_HSION;
|
||||
break;
|
||||
case LSE:
|
||||
RCC_BDCR &= ~RCC_BDCR_LSEON;
|
||||
break;
|
||||
case LSI:
|
||||
RCC_CSR &= ~RCC_CSR_LSION;
|
||||
break;
|
||||
}
|
||||
}
|
||||
|
||||
void rcc_css_enable(void)
|
||||
{
|
||||
RCC_CR |= RCC_CR_CSSON;
|
||||
}
|
||||
|
||||
void rcc_css_disable(void)
|
||||
{
|
||||
RCC_CR &= ~RCC_CR_CSSON;
|
||||
}
|
||||
|
||||
void rcc_osc_bypass_enable(osc_t osc)
|
||||
{
|
||||
switch (osc) {
|
||||
case HSE:
|
||||
RCC_CR |= RCC_CR_HSEBYP;
|
||||
break;
|
||||
case LSE:
|
||||
RCC_BDCR |= RCC_BDCR_LSEBYP;
|
||||
break;
|
||||
case PLL:
|
||||
case HSI:
|
||||
case LSI:
|
||||
/* Do nothing, only HSE/LSE allowed here. */
|
||||
break;
|
||||
}
|
||||
}
|
||||
|
||||
void rcc_osc_bypass_disable(osc_t osc)
|
||||
{
|
||||
switch (osc) {
|
||||
case HSE:
|
||||
RCC_CR &= ~RCC_CR_HSEBYP;
|
||||
break;
|
||||
case LSE:
|
||||
RCC_BDCR &= ~RCC_BDCR_LSEBYP;
|
||||
break;
|
||||
case PLL:
|
||||
case HSI:
|
||||
case LSI:
|
||||
/* Do nothing, only HSE/LSE allowed here. */
|
||||
break;
|
||||
}
|
||||
}
|
||||
|
||||
void rcc_peripheral_enable_clock(volatile u32 *reg, u32 en)
|
||||
{
|
||||
*reg |= en;
|
||||
}
|
||||
|
||||
void rcc_peripheral_disable_clock(volatile u32 *reg, u32 en)
|
||||
{
|
||||
*reg &= ~en;
|
||||
}
|
||||
|
||||
void rcc_peripheral_reset(volatile u32 *reg, u32 reset)
|
||||
{
|
||||
*reg |= reset;
|
||||
}
|
||||
|
||||
void rcc_peripheral_clear_reset(volatile u32 *reg, u32 clear_reset)
|
||||
{
|
||||
*reg &= ~clear_reset;
|
||||
}
|
||||
|
||||
void rcc_set_sysclk_source(u32 clk)
|
||||
{
|
||||
u32 reg32;
|
||||
|
||||
reg32 = RCC_CFGR;
|
||||
reg32 &= ~((1 << 1) | (1 << 0));
|
||||
RCC_CFGR = (reg32 | clk);
|
||||
}
|
||||
|
||||
void rcc_set_pll_source(u32 pllsrc)
|
||||
{
|
||||
u32 reg32;
|
||||
|
||||
reg32 = RCC_PLLCFGR;
|
||||
reg32 &= ~(1 << 22);
|
||||
RCC_PLLCFGR = (reg32 | (pllsrc << 22));
|
||||
}
|
||||
|
||||
void rcc_set_ppre2(u32 ppre2)
|
||||
{
|
||||
u32 reg32;
|
||||
|
||||
reg32 = RCC_CFGR;
|
||||
reg32 &= ~((1 << 11) | (1 << 12) | (1 << 13));
|
||||
RCC_CFGR = (reg32 | (ppre2 << 11));
|
||||
}
|
||||
|
||||
void rcc_set_ppre1(u32 ppre1)
|
||||
{
|
||||
u32 reg32;
|
||||
|
||||
reg32 = RCC_CFGR;
|
||||
reg32 &= ~((1 << 8) | (1 << 9) | (1 << 10));
|
||||
RCC_CFGR = (reg32 | (ppre1 << 8));
|
||||
}
|
||||
|
||||
void rcc_set_hpre(u32 hpre)
|
||||
{
|
||||
u32 reg32;
|
||||
|
||||
reg32 = RCC_CFGR;
|
||||
reg32 &= ~((1 << 4) | (1 << 5) | (1 << 6) | (1 << 7));
|
||||
RCC_CFGR = (reg32 | (hpre << 4));
|
||||
}
|
||||
|
||||
void rcc_set_rtcpre(u32 rtcpre)
|
||||
{
|
||||
u32 reg32;
|
||||
|
||||
reg32 = RCC_CFGR;
|
||||
reg32 &= ~((1 << 16) | (1 << 17) | (1 << 18) | (1 << 19) | (1 << 20));
|
||||
RCC_CFGR = (reg32 | (rtcpre << 16));
|
||||
}
|
||||
|
||||
void rcc_set_main_pll_hsi(u32 pllm, u32 plln, u32 pllp, u32 pllq)
|
||||
{
|
||||
RCC_PLLCFGR = pllm |
|
||||
(plln << 6) |
|
||||
(((pllp >> 1) - 1) << 16) |
|
||||
(pllq << 24);
|
||||
}
|
||||
|
||||
void rcc_set_main_pll_hse(u32 pllm, u32 plln, u32 pllp, u32 pllq)
|
||||
{
|
||||
RCC_PLLCFGR = pllm |
|
||||
(plln << 6) |
|
||||
(((pllp >> 1) - 1) << 16) |
|
||||
RCC_PLLCFGR_PLLSRC |
|
||||
(pllq << 24);
|
||||
}
|
||||
|
||||
u32 rcc_system_clock_source(void)
|
||||
{
|
||||
/* Return the clock source which is used as system clock. */
|
||||
return ((RCC_CFGR & 0x000c) >> 2);
|
||||
}
|
||||
|
||||
void rcc_clock_setup_in_hse_8mhz_out_120mhz(void)
|
||||
{
|
||||
/* Enable internal high-speed oscillator. */
|
||||
rcc_osc_on(HSI);
|
||||
rcc_wait_for_osc_ready(HSI);
|
||||
|
||||
/* Select HSI as SYSCLK source. */
|
||||
rcc_set_sysclk_source(RCC_CFGR_SW_HSI);
|
||||
|
||||
/* Enable external high-speed oscillator 8MHz. */
|
||||
rcc_osc_on(HSE);
|
||||
rcc_wait_for_osc_ready(HSE);
|
||||
rcc_set_sysclk_source(RCC_CFGR_SW_HSE);
|
||||
|
||||
/*
|
||||
* Set prescalers for AHB, ADC, ABP1, ABP2.
|
||||
* Do this before touching the PLL (TODO: why?).
|
||||
*/
|
||||
rcc_set_hpre(RCC_CFGR_HPRE_DIV_NONE); /* Set. 120MHz Max. 120MHz */
|
||||
rcc_set_ppre1(RCC_CFGR_PPRE_DIV_4); /* Set. 30MHz Max. 30MHz */
|
||||
rcc_set_ppre2(RCC_CFGR_PPRE_DIV_2); /* Set. 60MHz Max. 60MHz */
|
||||
|
||||
rcc_set_main_pll_hse(RCC_PLL_M, RCC_PLL_N, RCC_PLL_P, RCC_PLL_Q);
|
||||
|
||||
/* Enable PLL oscillator and wait for it to stabilize. */
|
||||
rcc_osc_on(PLL);
|
||||
rcc_wait_for_osc_ready(PLL);
|
||||
|
||||
/*
|
||||
* @3.3V
|
||||
* Sysclk runs with 120MHz -> 3 waitstates.
|
||||
* 0WS from 0-30MHz
|
||||
* 1WS from 30-60MHz
|
||||
* 2WS from 60-90MHz
|
||||
* 3WS from 90-120MHz
|
||||
*/
|
||||
flash_set_ws(FLASH_PRFTEN | FLASH_ICE | FLASH_DCE | FLASH_LATENCY_3WS);
|
||||
|
||||
/* Select PLL as SYSCLK source. */
|
||||
rcc_set_sysclk_source(RCC_CFGR_SW_PLL);
|
||||
|
||||
/* Wait for PLL clock to be selected. */
|
||||
rcc_wait_for_sysclk_status(PLL);
|
||||
|
||||
/* Set the peripheral clock frequencies used */
|
||||
rcc_ppre1_frequency = 30000000;
|
||||
rcc_ppre2_frequency = 60000000;
|
||||
}
|
||||
|
||||
void rcc_backupdomain_reset(void)
|
||||
{
|
||||
/* Set the backup domain software reset. */
|
||||
RCC_BDCR |= RCC_BDCR_BDRST;
|
||||
|
||||
/* Clear the backup domain software reset. */
|
||||
RCC_BDCR &= ~RCC_BDCR_BDRST;
|
||||
}
|
||||
Loading…
x
Reference in New Issue
Block a user