jackcartersmith/blackmagic
1
0
Fork 0
Code Issues Pull Requests Releases Activity

Add a few example programs for the Leaf Maple / IteadMaple boards.

Browse Source
This commit is contained in:
Weston Schmidt 2013-02-26 02:41:25 -08:00 committed by Piotr Esden-Tempski
parent b3d895bc64
commit 6ce2c6e13d
12 changed files with 700 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

25
examples/stm32/f1/stm32-maple/miniblink/Makefile Normal file
View File

@ -0,0 +1,25 @@
##
## This file is part of the libopencm3 project.
##
## Copyright (C) 2009 Uwe Hermann <uwe@hermann-uwe.de>
##
## This library is free software: you can redistribute it and/or modify
## it under the terms of the GNU Lesser General Public License as published by
## the Free Software Foundation, either version 3 of the License, or
## (at your option) any later version.
##
## This library is distributed in the hope that it will be useful,
## but WITHOUT ANY WARRANTY; without even the implied warranty of
## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
## GNU Lesser General Public License for more details.
##
## You should have received a copy of the GNU Lesser General Public License
## along with this library. If not, see <http://www.gnu.org/licenses/>.
##
BINARY = miniblink
LDSCRIPT = ../stm32-maple.ld
include ../../Makefile.include

9
examples/stm32/f1/stm32-maple/miniblink/README Normal file
View File

@ -0,0 +1,9 @@
------------------------------------------------------------------------------
README
------------------------------------------------------------------------------
This is the smallest-possible example program using libopencm3.
It's intended for the ST STM32-based Leaf Labs Maple board (see
http://leaflabs.com for details). It should blink the LED on the board.

71
examples/stm32/f1/stm32-maple/miniblink/miniblink.c Normal file
View File

@ -0,0 +1,71 @@
/*
* This file is part of the libopencm3 project.
*
* Copyright (C) 2009 Uwe Hermann <uwe@hermann-uwe.de>
*
* This library is free software: you can redistribute it and/or modify
* it under the terms of the GNU Lesser General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public License
* along with this library. If not, see <http://www.gnu.org/licenses/>.
*/
#include <libopencm3/stm32/f1/rcc.h>
#include <libopencm3/stm32/f1/gpio.h>
void gpio_setup(void)
{
/* Enable GPIOA clock. */
/* Manually: */
// RCC_APB2ENR |= RCC_APB2ENR_IOPCEN;
/* Using API functions: */
rcc_peripheral_enable_clock(&RCC_APB2ENR, RCC_APB2ENR_IOPCEN);
/* Set GPIO5 (in GPIO port A) to 'output push-pull'. */
/* Manually: */
// GPIOA_CRH = (GPIO_CNF_OUTPUT_PUSHPULL << (((5 - 8) * 4) + 2));
// GPIOA_CRH |= (GPIO_MODE_OUTPUT_2_MHZ << ((5 - 8) * 4));
/* Using API functions: */
gpio_set_mode(GPIOA, GPIO_MODE_OUTPUT_2_MHZ,
GPIO_CNF_OUTPUT_PUSHPULL, GPIO5);
}
int main(void)
{
int i;
gpio_setup();
/* Blink the LED (PA5) on the board. */
while (1) {
/* Manually: */
// GPIOA_BSRR = GPIO5; /* LED off */
// for (i = 0; i < 800000; i++) /* Wait a bit. */
// __asm__("nop");
// GPIOA_BRR = GPIO5; /* LED on */
// for (i = 0; i < 800000; i++) /* Wait a bit. */
// __asm__("nop");
/* Using API functions gpio_set()/gpio_clear(): */
// gpio_set(GPIOA, GPIO5); /* LED off */
// for (i = 0; i < 800000; i++) /* Wait a bit. */
// __asm__("nop");
// gpio_clear(GPIOA, GPIO5); /* LED on */
// for (i = 0; i < 800000; i++) /* Wait a bit. */
// __asm__("nop");
/* Using API function gpio_toggle(): */
gpio_toggle(GPIOA, GPIO5); /* LED on/off */
for (i = 0; i < 800000; i++) /* Wait a bit. */
__asm__("nop");
}
return 0;
}

32
examples/stm32/f1/stm32-maple/stm32-maple.ld Normal file
View File

@ -0,0 +1,32 @@
/*
* This file is part of the libopencm3 project.
*
* Copyright (C) 2009 Uwe Hermann <uwe@hermann-uwe.de>
*
* This library is free software: you can redistribute it and/or modify
* it under the terms of the GNU Lesser General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public License
* along with this library. If not, see <http://www.gnu.org/licenses/>.
*/
/* Linker script for Leaf Maple (STM32F103RBT6, 128K flash, 20K RAM,
* minus 20k flash and 3k RAM for the DFU bootloader). */
/* Define memory regions. */
MEMORY
{
rom (rx) : ORIGIN = 0x08005000, LENGTH = 108K
ram (rwx) : ORIGIN = 0x20000c00, LENGTH = 17K
}
/* Include the common ld script. */
INCLUDE libopencm3_stm32f1.ld

25
examples/stm32/f1/stm32-maple/usart/Makefile Normal file
View File

@ -0,0 +1,25 @@
##
## This file is part of the libopencm3 project.
##
## Copyright (C) 2009 Uwe Hermann <uwe@hermann-uwe.de>
##
## This library is free software: you can redistribute it and/or modify
## it under the terms of the GNU Lesser General Public License as published by
## the Free Software Foundation, either version 3 of the License, or
## (at your option) any later version.
##
## This library is distributed in the hope that it will be useful,
## but WITHOUT ANY WARRANTY; without even the implied warranty of
## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
## GNU Lesser General Public License for more details.
##
## You should have received a copy of the GNU Lesser General Public License
## along with this library. If not, see <http://www.gnu.org/licenses/>.
##
BINARY = usart
LDSCRIPT = ../stm32-maple.ld
include ../../Makefile.include

13
examples/stm32/f1/stm32-maple/usart/README Normal file
View File

@ -0,0 +1,13 @@
------------------------------------------------------------------------------
README
------------------------------------------------------------------------------
This example program sends some characters on USART3 on the ST STM32-based
Olimex STM32-H103 eval board (see http://olimex.com/dev/stm32-h103.html
for details).
The terminal settings for the receiving device/PC are 38400 8n1.
The sending is done in a blocking way in the code, see the usart_irq example
for a more elaborate USART example.

82
examples/stm32/f1/stm32-maple/usart/usart.c Normal file
View File

@ -0,0 +1,82 @@
/*
* This file is part of the libopencm3 project.
*
* Copyright (C) 2009 Uwe Hermann <uwe@hermann-uwe.de>
*
* This library is free software: you can redistribute it and/or modify
* it under the terms of the GNU Lesser General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public License
* along with this library. If not, see <http://www.gnu.org/licenses/>.
*/
#include <libopencm3/stm32/f1/rcc.h>
#include <libopencm3/stm32/f1/gpio.h>
#include <libopencm3/stm32/usart.h>
void clock_setup(void)
{
rcc_clock_setup_in_hse_8mhz_out_72mhz();
/* Enable GPIOA clock. */
rcc_peripheral_enable_clock(&RCC_APB2ENR, RCC_APB2ENR_IOPAEN);
/* Enable clocks for GPIO port A (for GPIO_USART2_TX) and USART2. */
rcc_peripheral_enable_clock(&RCC_APB1ENR, RCC_APB1ENR_USART2EN);
}
void usart_setup(void)
{
/* Setup GPIO pin GPIO_USART2_TX. */
gpio_set_mode(GPIOA, GPIO_MODE_OUTPUT_50_MHZ,
GPIO_CNF_OUTPUT_ALTFN_PUSHPULL, GPIO_USART2_TX);
/* Setup UART parameters. */
usart_set_baudrate(USART2, 38400);
usart_set_databits(USART2, 8);
usart_set_stopbits(USART2, USART_STOPBITS_1);
usart_set_mode(USART2, USART_MODE_TX);
usart_set_parity(USART2, USART_PARITY_NONE);
usart_set_flow_control(USART2, USART_FLOWCONTROL_NONE);
/* Finally enable the USART. */
usart_enable(USART2);
}
void gpio_setup(void)
{
/* Set GPIO (in GPIO port A) to 'output push-pull'. */
gpio_set_mode(GPIOA, GPIO_MODE_OUTPUT_2_MHZ,
GPIO_CNF_OUTPUT_PUSHPULL, GPIO5);
}
int main(void)
{
int i, j = 0, c = 0;
clock_setup();
gpio_setup();
usart_setup();
/* Blink the LED (PA5) on the board with every transmitted byte. */
while (1) {
gpio_toggle(GPIOA, GPIO5); /* LED on/off */
usart_send_blocking(USART2, c + '0'); /* USART2: Send byte. */
c = (c == 9) ? 0 : c + 1; /* Increment c. */
if ((j++ % 80) == 0) { /* Newline after line full. */
usart_send_blocking(USART2, '\r');
usart_send_blocking(USART2, '\n');
}
for (i = 0; i < 8000000; i++) /* Wait a bit. */
__asm__("nop");
}
return 0;
}

25
examples/stm32/f1/stm32-maple/usart_irq/Makefile Normal file
View File

@ -0,0 +1,25 @@
##
## This file is part of the libopencm3 project.
##
## Copyright (C) 2009 Uwe Hermann <uwe@hermann-uwe.de>
##
## This library is free software: you can redistribute it and/or modify
## it under the terms of the GNU Lesser General Public License as published by
## the Free Software Foundation, either version 3 of the License, or
## (at your option) any later version.
##
## This library is distributed in the hope that it will be useful,
## but WITHOUT ANY WARRANTY; without even the implied warranty of
## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
## GNU Lesser General Public License for more details.
##
## You should have received a copy of the GNU Lesser General Public License
## along with this library. If not, see <http://www.gnu.org/licenses/>.
##
BINARY = usart_irq
LDSCRIPT = ../stm32-maple.ld
include ../../Makefile.include

120
examples/stm32/f1/stm32-maple/usart_irq/usart_irq.c Normal file
View File

@ -0,0 +1,120 @@
/*
* This file is part of the libopencm3 project.
*
* Copyright (C) 2009 Uwe Hermann <uwe@hermann-uwe.de>
*
* This library is free software: you can redistribute it and/or modify
* it under the terms of the GNU Lesser General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public License
* along with this library. If not, see <http://www.gnu.org/licenses/>.
*/
#include <libopencm3/stm32/f1/rcc.h>
#include <libopencm3/stm32/f1/gpio.h>
#include <libopencm3/stm32/usart.h>
#include <libopencm3/cm3/nvic.h>
#include <libopencm3/cm3/scb.h>
void clock_setup(void)
{
rcc_clock_setup_in_hse_8mhz_out_72mhz();
/* Enable GPIOA clock. */
rcc_peripheral_enable_clock(&RCC_APB2ENR, RCC_APB2ENR_IOPAEN);
/* Enable clocks for GPIO port A (for LED GPIO_USART2_TX) and USART2. */
rcc_peripheral_enable_clock(&RCC_APB1ENR, RCC_APB1ENR_USART2EN);
}
void usart_setup(void)
{
/* Enable the USART2 interrupt. */
nvic_enable_irq(NVIC_USART2_IRQ);
/* Setup GPIO pin GPIO_USART2_RE_TX on GPIO port A for transmit. */
gpio_set_mode(GPIOA, GPIO_MODE_OUTPUT_50_MHZ,
GPIO_CNF_OUTPUT_ALTFN_PUSHPULL, GPIO_USART2_TX);
/* Setup GPIO pin GPIO_USART2_RE_RX on GPIO port A for receive. */
gpio_set_mode(GPIOA, GPIO_MODE_INPUT,
GPIO_CNF_INPUT_FLOAT, GPIO_USART2_RX);
/* Setup UART parameters. */
usart_set_baudrate(USART2, 38400);
usart_set_databits(USART2, 8);
usart_set_stopbits(USART2, USART_STOPBITS_1);
usart_set_parity(USART2, USART_PARITY_NONE);
usart_set_flow_control(USART2, USART_FLOWCONTROL_NONE);
usart_set_mode(USART2, USART_MODE_TX_RX);
/* Enable USART2 Receive interrupt. */
USART_CR1(USART2) |= USART_CR1_RXNEIE;
/* Finally enable the USART. */
usart_enable(USART2);
}
void gpio_setup(void)
{
gpio_set(GPIOA, GPIO5);
/* Setup GPIO5 (in GPIO port A) for LED use. */
gpio_set_mode(GPIOA, GPIO_MODE_OUTPUT_50_MHZ,
GPIO_CNF_OUTPUT_PUSHPULL, GPIO5);
}
void usart2_isr(void)
{
static u8 data = 'A';
/* Check if we were called because of RXNE. */
if (((USART_CR1(USART2) & USART_CR1_RXNEIE) != 0) &&
((USART_SR(USART2) & USART_SR_RXNE) != 0)) {
/* Indicate that we got data. */
gpio_toggle(GPIOA, GPIO5);
/* Retrieve the data from the peripheral. */
data = usart_recv(USART2);
/* Enable transmit interrupt so it sends back the data. */
USART_CR1(USART2) |= USART_CR1_TXEIE;
}
/* Check if we were called because of TXE. */
if (((USART_CR1(USART2) & USART_CR1_TXEIE) != 0) &&
((USART_SR(USART2) & USART_SR_TXE) != 0)) {
/* Indicate that we are sending out data. */
// gpio_toggle(GPIOA, GPIO5);
/* Put data into the transmit register. */
usart_send(USART2, data);
/* Disable the TXE interrupt as we don't need it anymore. */
USART_CR1(USART2) &= ~USART_CR1_TXEIE;
}
}
int main(void)
{
SCB_VTOR = (u32) 0x08005000;
clock_setup();
gpio_setup();
usart_setup();
/* Wait forever and do nothing. */
while (1)
__asm__("nop");
return 0;
}

25
examples/stm32/f1/stm32-maple/usb_cdcacm/Makefile Normal file
View File

@ -0,0 +1,25 @@
##
## This file is part of the libopencm3 project.
##
## Copyright (C) 2009 Uwe Hermann <uwe@hermann-uwe.de>
##
## This library is free software: you can redistribute it and/or modify
## it under the terms of the GNU Lesser General Public License as published by
## the Free Software Foundation, either version 3 of the License, or
## (at your option) any later version.
##
## This library is distributed in the hope that it will be useful,
## but WITHOUT ANY WARRANTY; without even the implied warranty of
## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
## GNU Lesser General Public License for more details.
##
## You should have received a copy of the GNU Lesser General Public License
## along with this library. If not, see <http://www.gnu.org/licenses/>.
##
BINARY = cdcacm
LDSCRIPT = ../stm32-maple.ld
include ../../Makefile.include

7
examples/stm32/f1/stm32-maple/usb_cdcacm/README Normal file
View File

@ -0,0 +1,7 @@
------------------------------------------------------------------------------
README
------------------------------------------------------------------------------
This example implements a USB CDC-ACM device (aka Virtual Serial Port)
to demonstrate the use of the USB device stack.

266
examples/stm32/f1/stm32-maple/usb_cdcacm/cdcacm.c Normal file
View File

@ -0,0 +1,266 @@
/*
* This file is part of the libopencm3 project.
*
* Copyright (C) 2010 Gareth McMullin <gareth@blacksphere.co.nz>
*
* This library is free software: you can redistribute it and/or modify
* it under the terms of the GNU Lesser General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public License
* along with this library. If not, see <http://www.gnu.org/licenses/>.
*/
#include <stdlib.h>
#include <libopencm3/stm32/f1/rcc.h>
#include <libopencm3/stm32/f1/gpio.h>
#include <libopencm3/usb/usbd.h>
#include <libopencm3/usb/cdc.h>
#include <libopencm3/cm3/scb.h>
static const struct usb_device_descriptor dev = {
.bLength = USB_DT_DEVICE_SIZE,
.bDescriptorType = USB_DT_DEVICE,
.bcdUSB = 0x0200,
.bDeviceClass = USB_CLASS_CDC,
.bDeviceSubClass = 0,
.bDeviceProtocol = 0,
.bMaxPacketSize0 = 64,
.idVendor = 0x0483,
.idProduct = 0x5740,
.bcdDevice = 0x0200,
.iManufacturer = 1,
.iProduct = 2,
.iSerialNumber = 3,
.bNumConfigurations = 1,
};
/*
* This notification endpoint isn't implemented. According to CDC spec its
* optional, but its absence causes a NULL pointer dereference in Linux
* cdc_acm driver.
*/
static const struct usb_endpoint_descriptor comm_endp[] = {{
.bLength = USB_DT_ENDPOINT_SIZE,
.bDescriptorType = USB_DT_ENDPOINT,
.bEndpointAddress = 0x83,
.bmAttributes = USB_ENDPOINT_ATTR_INTERRUPT,
.wMaxPacketSize = 16,
.bInterval = 255,
}};
static const struct usb_endpoint_descriptor data_endp[] = {{
.bLength = USB_DT_ENDPOINT_SIZE,
.bDescriptorType = USB_DT_ENDPOINT,
.bEndpointAddress = 0x01,
.bmAttributes = USB_ENDPOINT_ATTR_BULK,
.wMaxPacketSize = 64,
.bInterval = 1,
}, {
.bLength = USB_DT_ENDPOINT_SIZE,
.bDescriptorType = USB_DT_ENDPOINT,
.bEndpointAddress = 0x82,
.bmAttributes = USB_ENDPOINT_ATTR_BULK,
.wMaxPacketSize = 64,
.bInterval = 1,
}};
static const struct {
struct usb_cdc_header_descriptor header;
struct usb_cdc_call_management_descriptor call_mgmt;
struct usb_cdc_acm_descriptor acm;
struct usb_cdc_union_descriptor cdc_union;
} __attribute__((packed)) cdcacm_functional_descriptors = {
.header = {
.bFunctionLength = sizeof(struct usb_cdc_header_descriptor),
.bDescriptorType = CS_INTERFACE,
.bDescriptorSubtype = USB_CDC_TYPE_HEADER,
.bcdCDC = 0x0110,
},
.call_mgmt = {
.bFunctionLength =
sizeof(struct usb_cdc_call_management_descriptor),
.bDescriptorType = CS_INTERFACE,
.bDescriptorSubtype = USB_CDC_TYPE_CALL_MANAGEMENT,
.bmCapabilities = 0,
.bDataInterface = 1,
},
.acm = {
.bFunctionLength = sizeof(struct usb_cdc_acm_descriptor),
.bDescriptorType = CS_INTERFACE,
.bDescriptorSubtype = USB_CDC_TYPE_ACM,
.bmCapabilities = 0,
},
.cdc_union = {
.bFunctionLength = sizeof(struct usb_cdc_union_descriptor),
.bDescriptorType = CS_INTERFACE,
.bDescriptorSubtype = USB_CDC_TYPE_UNION,
.bControlInterface = 0,
.bSubordinateInterface0 = 1,
},
};
static const struct usb_interface_descriptor comm_iface[] = {{
.bLength = USB_DT_INTERFACE_SIZE,
.bDescriptorType = USB_DT_INTERFACE,
.bInterfaceNumber = 0,
.bAlternateSetting = 0,
.bNumEndpoints = 1,
.bInterfaceClass = USB_CLASS_CDC,
.bInterfaceSubClass = USB_CDC_SUBCLASS_ACM,
.bInterfaceProtocol = USB_CDC_PROTOCOL_AT,
.iInterface = 0,
.endpoint = comm_endp,
.extra = &cdcacm_functional_descriptors,
.extralen = sizeof(cdcacm_functional_descriptors),
}};
static const struct usb_interface_descriptor data_iface[] = {{
.bLength = USB_DT_INTERFACE_SIZE,
.bDescriptorType = USB_DT_INTERFACE,
.bInterfaceNumber = 1,
.bAlternateSetting = 0,
.bNumEndpoints = 2,
.bInterfaceClass = USB_CLASS_DATA,
.bInterfaceSubClass = 0,
.bInterfaceProtocol = 0,
.iInterface = 0,
.endpoint = data_endp,
}};
static const struct usb_interface ifaces[] = {{
.num_altsetting = 1,
.altsetting = comm_iface,
}, {
.num_altsetting = 1,
.altsetting = data_iface,
}};
static const struct usb_config_descriptor config = {
.bLength = USB_DT_CONFIGURATION_SIZE,
.bDescriptorType = USB_DT_CONFIGURATION,
.wTotalLength = 0,
.bNumInterfaces = 2,
.bConfigurationValue = 1,
.iConfiguration = 0,
.bmAttributes = 0x80,
.bMaxPower = 0x32,
.interface = ifaces,
};
static const char *usb_strings[] = {
"Black Sphere Technologies",
"CDC-ACM Demo",
"DEMO",
};
static int cdcacm_control_request(usbd_device *usbd_dev, struct usb_setup_data *req, u8 **buf,
u16 *len, void (**complete)(usbd_device *usbd_dev, struct usb_setup_data *req))
{
(void)complete;
(void)buf;
(void)usbd_dev;
switch (req->bRequest) {
case USB_CDC_REQ_SET_CONTROL_LINE_STATE: {
/*
* This Linux cdc_acm driver requires this to be implemented
* even though it's optional in the CDC spec, and we don't
* advertise it in the ACM functional descriptor.
*/
char buf[10];
struct usb_cdc_notification *notif = (void *)buf;
/* We echo signals back to host as notification. */
notif->bmRequestType = 0xA1;
notif->bNotification = USB_CDC_NOTIFY_SERIAL_STATE;
notif->wValue = 0;
notif->wIndex = 0;
notif->wLength = 2;
buf[8] = req->wValue & 3;
buf[9] = 0;
// usbd_ep_write_packet(0x83, buf, 10);
return 1;
}
case USB_CDC_REQ_SET_LINE_CODING:
if (*len < sizeof(struct usb_cdc_line_coding))
return 0;
return 1;
}
return 0;
}
static void cdcacm_data_rx_cb(usbd_device *usbd_dev, u8 ep)
{
(void)ep;
(void)usbd_dev;
char buf[64];
int len = usbd_ep_read_packet(usbd_dev, 0x01, buf, 64);
if (len) {
usbd_ep_write_packet(usbd_dev, 0x82, buf, len);
buf[len] = 0;
}
}
static void cdcacm_set_config(usbd_device *usbd_dev, u16 wValue)
{
(void)wValue;
(void)usbd_dev;
usbd_ep_setup(usbd_dev, 0x01, USB_ENDPOINT_ATTR_BULK, 64, cdcacm_data_rx_cb);
usbd_ep_setup(usbd_dev, 0x82, USB_ENDPOINT_ATTR_BULK, 64, NULL);
usbd_ep_setup(usbd_dev, 0x83, USB_ENDPOINT_ATTR_INTERRUPT, 16, NULL);
usbd_register_control_callback(
usbd_dev,
USB_REQ_TYPE_CLASS | USB_REQ_TYPE_INTERFACE,
USB_REQ_TYPE_TYPE | USB_REQ_TYPE_RECIPIENT,
cdcacm_control_request);
}
int main(void)
{
int i;
usbd_device *usbd_dev;
SCB_VTOR = (u32) 0x08005000;
rcc_clock_setup_in_hse_8mhz_out_72mhz();
rcc_peripheral_enable_clock(&RCC_APB2ENR, RCC_APB2ENR_IOPAEN |
RCC_APB2ENR_IOPCEN);
/* Setup GPIOC Pin 12 to pull up the D+ high, so autodect works
* with the bootloader. The circuit is active low. */
gpio_set_mode(GPIOC, GPIO_MODE_OUTPUT_2_MHZ,
GPIO_CNF_OUTPUT_OPENDRAIN, GPIO12);
gpio_clear(GPIOC, GPIO12);
/* Setup GPIOA Pin 5 for the LED */
gpio_set(GPIOA, GPIO5);
gpio_set_mode(GPIOA, GPIO_MODE_OUTPUT_2_MHZ,
GPIO_CNF_OUTPUT_PUSHPULL, GPIO5);
usbd_dev = usbd_init(&stm32f103_usb_driver, &dev, &config, usb_strings, 3);
usbd_register_set_config_callback(usbd_dev, cdcacm_set_config);
for (i = 0; i < 0x800000; i++)
__asm__("nop");
gpio_clear(GPIOA, GPIO5);
while (1)
usbd_poll(usbd_dev);
}