jackcartersmith/blackmagic
1
0
Fork 0
Code Issues Pull Requests Releases Activity

[Stylefix] Removed trailing spaces and added missing braces.

Browse Source
This commit is contained in:
Piotr Esden-Tempski 2013-07-05 21:42:36 -07:00
parent 68ee13be4b
commit 7042beaa91
2 changed files with 19 additions and 16 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

33
lib/stm32/f3/adc.c
View File

@ -34,7 +34,7 @@
* end*
* of conversion, which occurs after all channels have been scanned.
*
* A discontinuous mode allows a subgroup of group of a channels to be
* A discontinuous mode allows a subgroup of group of a channels to be
* converted in bursts of a given length.
*
* Injected conversions allow a second group of channels to be converted
@ -106,9 +106,9 @@ void adc_off(uint32_t adc)
/** @brief ADC Enable Analog Watchdog for Regular Conversions
*
* The analog watchdog allows the monitoring of an analog signal between two
* threshold levels. The thresholds must be preset. Comparison is done before
* threshold levels. The thresholds must be preset. Comparison is done before
* data alignment takes place, so the thresholds are left-aligned.
*
*
* @param[in] adc Unsigned int32. ADC block register address base @ref
* adc_reg_base
*/
@ -258,7 +258,7 @@ void adc_disable_automatic_injected_group_conversion(uint32_t adc)
/** @brief ADC Enable Analog Watchdog for All Regular and/or Injected Channels
*
* The analog watchdog allows the monitoring of an analog signal between two
* threshold levels. The thresholds must be preset. Comparison is done before
* threshold levels. The thresholds must be preset. Comparison is done before
* data alignment takes place, so the thresholds are left-aligned.
*
* @note The analog watchdog must be enabled for either or both of the regular
@ -289,10 +289,10 @@ void adc_enable_analog_watchdog_on_all_channels(uint32_t adc)
* will be disabled. If both are enabled, the same channel number is monitored
* @ref adc_enable_analog_watchdog_injected, @ref
* adc_enable_analog_watchdog_regular.
*
*
* @param[in] adc Unsigned int32. ADC block register address base @ref
* adc_reg_base
* @param[in] channel Unsigned int8. ADC channel numbe
* @param[in] channel Unsigned int8. ADC channel numbe
* @ref adc_watchdog_channel
*/
@ -302,8 +302,9 @@ void adc_enable_analog_watchdog_on_selected_channel(uint32_t adc,
uint32_t reg32;
reg32 = (ADC_CFGR(adc) & ~ADC_CFGR_AWD1CH_MASK); /* Clear bit [4:0]. */
if (channel < 18)
if (channel < 18) {
reg32 |= channel;
}
ADC_CFGR(adc) = reg32;
ADC_CFGR(adc) |= ADC_CFGR_AWD1SGL;
}
@ -420,7 +421,7 @@ void adc_disable_eoc_interrupt(uint32_t adc)
/*---------------------------------------------------------------------------*/
/** @brief ADC Software Triggered Conversion on Regular Channels
*
* This starts conversion on a set of defined regular channels. It is cleared
* This starts conversion on a set of defined regular channels. It is cleared
* by hardware once conversion starts.
*
* @param[in] adc Unsigned int32. ADC block register address base @ref
@ -524,7 +525,7 @@ void adc_set_continuous_conversion_mode(uint32_t adc)
*
* In this mode the ADC performs a conversion of one channel or a channel group
* and stops.
*
*
* @param[in] adc Unsigned int32. ADC block register address base
* @ref adc_reg_base
*/
@ -581,12 +582,14 @@ void adc_set_sample_time_on_all_channels(uint32_t adc, uint8_t time)
uint8_t i;
uint32_t reg32 = 0;
for (i = 0; i <= 9; i++)
for (i = 0; i <= 9; i++) {
reg32 |= (time << (i * 3));
}
ADC_SMPR2(adc) = reg32;
for (i = 10; i <= 17; i++)
for (i = 10; i <= 17; i++) {
reg32 |= (time << ((i - 10) * 3));
}
ADC_SMPR1(adc) = reg32;
}
@ -764,7 +767,7 @@ uint32_t adc_read_regular(uint32_t adc)
* is 12 bits, right or left aligned within the first 16 bits. The result can
* have a negative value if the injected channel offset has been set @see
* adc_set_injected_offset.
*
*
* @param[in] adc Unsigned int32. ADC block register address base @ref
* adc_reg_base
* @param[in] reg Unsigned int8. Register number (1 ... 4).
@ -993,11 +996,11 @@ void adc_disable_overrun_interrupt(uint32_t adc)
/*---------------------------------------------------------------------------*/
/** @brief ADC Read the Overrun Flag
*
*
* The overrun flag is set when data is not read from a result register before
* the next conversion is written. If DMA is enabled, all transfers are
* terminated and any conversion sequence is aborted.
*
*
* @param[in] adc Unsigned int32. ADC block register address base @ref
* adc_reg_base
* @returns Unsigned int32 conversion result.
@ -1081,7 +1084,7 @@ void adc_set_dma_continue(uint32_t adc)
* This must be set to allow DMA to terminate after the last conversion in the
* DMA sequence. This can avoid overrun errors.
*
* @param[in] adc Unsigned int32. ADC block register address base
* @param[in] adc Unsigned int32. ADC block register address base
* @ref adc_reg_base
*/

2
lib/stm32/f3/usart.c
View File

@ -82,7 +82,7 @@ void usart_wait_send_ready(uint32_t usart)
/** @brief USART Wait for Received Data Available
*
* Blocks until the receive data buffer holds a valid received data word.
*
*
* @param[in] usart unsigned 32 bit. USART block register address base @ref
* usart_reg_base
*/