jackcartersmith/blackmagic
1
0
Fork 0
Code Issues Pull Requests Releases Activity

doc: stm32: fix doxygen syntax

Browse Source 
Missing endgroups, some accidental syntax errors/unknown commands.
This commit is contained in:
Karl Palsson 2016-08-18 16:57:10 +00:00 committed by Karl Palsson
parent 34c3a64177
commit 75011168f7
4 changed files with 9 additions and 6 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

4
include/libopencm3/stm32/l1/gpio.h
View File

@ -163,10 +163,10 @@ LGPL License Terms @ref lgpl_license
/* Output type (OTx values) */
/** @defgroup gpio_output_type GPIO Output Pin Driver Type
@ingroup gpio_defines
@list Push Pull
@list Open Drain
@{*/
/** Push-Pull */
#define GPIO_OTYPE_PP 0x0
/** Open Drain */
#define GPIO_OTYPE_OD 0x1
/**@}*/

1
lib/stm32/common/adc_common_v2.c
View File

@ -354,3 +354,4 @@ void adc_start_conversion_regular(uint32_t adc)
while (ADC_CR(adc) & ADC_CR_ADSTART);
}
/**@}*/

2
lib/stm32/common/adc_common_v2_multi.c
View File

@ -127,3 +127,5 @@ void adc_set_regular_sequence(uint32_t adc, uint8_t length, uint8_t channel[])
ADC_SQR3(adc) = reg32_3;
ADC_SQR4(adc) = reg32_4;
}
/**@}*/

8
lib/stm32/common/usart_common_v2.c
View File

@ -90,7 +90,7 @@ void usart_disable_tx_inversion(uint32_t usart)
RX pin signal values are inverted. (VDD =0/mark, Gnd=1/idle).
@This bit field can only be written when the USART is disabled.
This bit field can only be written when the USART is disabled.
@param[in] usart USART block register address base @ref usart_reg_base
*/
@ -104,7 +104,7 @@ void usart_enable_rx_inversion(uint32_t usart)
RX pin signal works using the standard logic levels (VDD =1/idle, Gnd=0/mark)
@This bit field can only be written when the USART is disabled.
This bit field can only be written when the USART is disabled.
@param[in] usart USART block register address base @ref usart_reg_base
*/
@ -127,7 +127,7 @@ void usart_disable_rx_inversion(uint32_t usart)
Apart from this, the communication protocol is similar to normal USART mode.
Any conflicts on the line must be managed by software
@This bit field can only be written when the USART is disabled.
This bit field can only be written when the USART is disabled.
@param[in] usart USART block register address base @ref usart_reg_base
*/
@ -139,7 +139,7 @@ void usart_enable_halfduplex(uint32_t usart)
/*---------------------------------------------------------------------------*/
/** @brief USART Disable Half-duplex
@This bit field can only be written when the USART is disabled.
This bit field can only be written when the USART is disabled.
@param[in] usart USART block register address base @ref usart_reg_base
*/