Added dma_mem2mem example.
This commit is contained in:
Thomas Otto
parent
97e27b2430
commit
9dc0af94b0
@ -24,7 +24,7 @@ Q := @
|
|||||||
MAKEFLAGS += --no-print-directory
|
MAKEFLAGS += --no-print-directory
|
||||||
endif
|
endif
|
||||||
|
|
||||||
all: i2c_stts75_sensor adc_temperature_sensor
|
all: i2c_stts75_sensor adc_temperature_sensor dma_mem2mem
|
||||||
|
|
||||||
i2c_stts75_sensor:
|
i2c_stts75_sensor:
|
||||||
@printf " BUILD examples/other/i2c_stts75_sensor\n"
|
@printf " BUILD examples/other/i2c_stts75_sensor\n"
|
||||||
@ -34,11 +34,17 @@ adc_temperature_sensor:
|
|||||||
@printf " BUILD examples/other/adc_temperature_sensor\n"
|
@printf " BUILD examples/other/adc_temperature_sensor\n"
|
||||||
$(Q)$(MAKE) -C adc_temperature_sensor
|
$(Q)$(MAKE) -C adc_temperature_sensor
|
||||||
|
|
||||||
|
dma_mem2mem:
|
||||||
|
@printf " BUILD examples/other/dma_mem2mem\n"
|
||||||
|
$(Q)$(MAKE) -C dma_mem2mem
|
||||||
|
|
||||||
clean:
|
clean:
|
||||||
@printf " CLEAN examples/other/i2c_stts75_sensor\n"
|
@printf " CLEAN examples/other/i2c_stts75_sensor\n"
|
||||||
$(Q)$(MAKE) -C i2c_stts75_sensor clean
|
$(Q)$(MAKE) -C i2c_stts75_sensor clean
|
||||||
@printf " CLEAN examples/other/adc_temperature_sensor\n"
|
@printf " CLEAN examples/other/adc_temperature_sensor\n"
|
||||||
$(Q)$(MAKE) -C adc_temperature_sensor clean
|
$(Q)$(MAKE) -C adc_temperature_sensor clean
|
||||||
|
@printf " CLEAN examples/other/dma_mem2mem\n"
|
||||||
|
$(Q)$(MAKE) -C dma_mem2mem clean
|
||||||
|
|
||||||
.PHONY: i2c_stts75_sensor adc_temperature_sensor clean
|
.PHONY: i2c_stts75_sensor adc_temperature_sensor dma_mem2mem clean
|
||||||
|
|
||||||
|
|||||||
95
examples/other/dma_mem2mem/Makefile
Normal file
95
examples/other/dma_mem2mem/Makefile
Normal file
@ -0,0 +1,95 @@
|
|||||||
|
##
|
||||||
|
## This file is part of the libopenstm32 project.
|
||||||
|
##
|
||||||
|
## Copyright (C) 2009 Uwe Hermann <uwe@hermann-uwe.de>
|
||||||
|
##
|
||||||
|
## This program is free software: you can redistribute it and/or modify
|
||||||
|
## it under the terms of the GNU General Public License as published by
|
||||||
|
## the Free Software Foundation, either version 3 of the License, or
|
||||||
|
## (at your option) any later version.
|
||||||
|
##
|
||||||
|
## This program is distributed in the hope that it will be useful,
|
||||||
|
## but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
## GNU General Public License for more details.
|
||||||
|
##
|
||||||
|
## You should have received a copy of the GNU General Public License
|
||||||
|
## along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||||
|
##
|
||||||
|
|
||||||
|
BINARY = dma
|
||||||
|
|
||||||
|
# PREFIX ?= arm-none-eabi
|
||||||
|
PREFIX ?= arm-elf
|
||||||
|
CC = $(PREFIX)-gcc
|
||||||
|
LD = $(PREFIX)-ld
|
||||||
|
OBJCOPY = $(PREFIX)-objcopy
|
||||||
|
OBJDUMP = $(PREFIX)-objdump
|
||||||
|
# Uncomment this line if you want to use the installed (not local) library.
|
||||||
|
#TOOLCHAIN_DIR = `dirname \`which $(CC)\``/..
|
||||||
|
TOOLCHAIN_DIR = ../../..
|
||||||
|
CFLAGS = -O0 -g -Wall -Wextra -I$(TOOLCHAIN_DIR)/include -fno-common \
|
||||||
|
-mcpu=cortex-m3 -mthumb
|
||||||
|
LDSCRIPT = $(BINARY).ld
|
||||||
|
LDFLAGS = -L$(TOOLCHAIN_DIR)/lib -T$(LDSCRIPT) -nostartfiles
|
||||||
|
OBJS = $(BINARY).o
|
||||||
|
|
||||||
|
OPENOCD_BASE = /usr
|
||||||
|
OPENOCD = $(OPENOCD_BASE)/bin/openocd
|
||||||
|
OPENOCD_SCRIPTS = $(OPENOCD_BASE)/share/openocd/scripts
|
||||||
|
OPENOCD_FLASHER = $(OPENOCD_SCRIPTS)/interface/jtagkey.cfg
|
||||||
|
OPENOCD_BOARD = $(OPENOCD_SCRIPTS)/target/stm32.cfg
|
||||||
|
|
||||||
|
# Be silent per default, but 'make V=1' will show all compiler calls.
|
||||||
|
ifneq ($(V),1)
|
||||||
|
Q := @
|
||||||
|
NULL := 2>/dev/null
|
||||||
|
endif
|
||||||
|
|
||||||
|
all: images
|
||||||
|
|
||||||
|
images: $(BINARY)
|
||||||
|
@printf " OBJCOPY $(BINARY).bin\n"
|
||||||
|
$(Q)$(OBJCOPY) -Obinary $(BINARY) $(BINARY).bin
|
||||||
|
@printf " OBJCOPY $(BINARY).hex\n"
|
||||||
|
$(Q)$(OBJCOPY) -Oihex $(BINARY) $(BINARY).hex
|
||||||
|
@printf " OBJCOPY $(BINARY).srec\n"
|
||||||
|
$(Q)$(OBJCOPY) -Osrec $(BINARY) $(BINARY).srec
|
||||||
|
@printf " OBJDUMP $(BINARY).list\n"
|
||||||
|
$(Q)$(OBJDUMP) -S $(BINARY) > $(BINARY).list
|
||||||
|
|
||||||
|
$(BINARY): $(OBJS) $(LDSCRIPT)
|
||||||
|
@printf " LD $(subst $(shell pwd)/,,$(@))\n"
|
||||||
|
$(Q)$(LD) $(LDFLAGS) -o $(BINARY) $(OBJS) -lopenstm32
|
||||||
|
|
||||||
|
%.o: %.c Makefile
|
||||||
|
@printf " CC $(subst $(shell pwd)/,,$(@))\n"
|
||||||
|
$(Q)$(CC) $(CFLAGS) -o $@ -c $<
|
||||||
|
|
||||||
|
clean:
|
||||||
|
@printf " CLEAN $(subst $(shell pwd)/,,$(OBJS))\n"
|
||||||
|
$(Q)rm -f *.o
|
||||||
|
@printf " CLEAN $(BINARY)\n"
|
||||||
|
$(Q)rm -f $(BINARY)
|
||||||
|
@printf " CLEAN $(BINARY).bin\n"
|
||||||
|
$(Q)rm -f $(BINARY).bin
|
||||||
|
@printf " CLEAN $(BINARY).hex\n"
|
||||||
|
$(Q)rm -f $(BINARY).hex
|
||||||
|
@printf " CLEAN $(BINARY).srec\n"
|
||||||
|
$(Q)rm -f $(BINARY).srec
|
||||||
|
@printf " CLEAN $(BINARY).list\n"
|
||||||
|
$(Q)rm -f $(BINARY).list
|
||||||
|
|
||||||
|
flash: images
|
||||||
|
@printf " FLASH $(BINARY).bin\n"
|
||||||
|
@# IMPORTANT: Don't use "resume", only "reset" will work correctly!
|
||||||
|
$(Q)$(OPENOCD) -s $(OPENOCD_SCRIPTS) \
|
||||||
|
-f $(OPENOCD_FLASHER) \
|
||||||
|
-f $(OPENOCD_BOARD) \
|
||||||
|
-c "init" -c "reset halt" \
|
||||||
|
-c "flash write_image erase $(BINARY).hex" \
|
||||||
|
-c "reset" \
|
||||||
|
-c "shutdown" $(NULL)
|
||||||
|
|
||||||
|
.PHONY: images clean
|
||||||
|
|
||||||
48
examples/other/dma_mem2mem/README
Normal file
48
examples/other/dma_mem2mem/README
Normal file
@ -0,0 +1,48 @@
|
|||||||
|
------------------------------------------------------------------------------
|
||||||
|
README
|
||||||
|
------------------------------------------------------------------------------
|
||||||
|
|
||||||
|
This program demonstrates a little DMA MEM2MEM transfer. A string is send out
|
||||||
|
to USART1 and afterwards copied by DMA to another memory location. To check
|
||||||
|
if the transfer was successful we send the destination string also out to
|
||||||
|
USART1.
|
||||||
|
|
||||||
|
The terminal settings for the receiving device/PC are 115200 8n1.
|
||||||
|
|
||||||
|
|
||||||
|
Building
|
||||||
|
--------
|
||||||
|
|
||||||
|
$ make
|
||||||
|
|
||||||
|
Running 'make' on the top-level libopenstm32 directory will automatically
|
||||||
|
also build this example. Or you can build the library "manually" and
|
||||||
|
then run 'make' in this directory.
|
||||||
|
|
||||||
|
You may want to override the toolchain (e.g., arm-elf or arm-none-eabi):
|
||||||
|
|
||||||
|
$ PREFIX=arm-none-eabi make
|
||||||
|
|
||||||
|
For a more verbose build you can use
|
||||||
|
|
||||||
|
$ make V=1
|
||||||
|
|
||||||
|
|
||||||
|
Flashing
|
||||||
|
--------
|
||||||
|
|
||||||
|
You can flash the generated code using OpenOCD:
|
||||||
|
|
||||||
|
$ make flash
|
||||||
|
|
||||||
|
Or you can do the same manually via:
|
||||||
|
|
||||||
|
$ openocd -f interface/jtagkey-tiny.cfg -f target/stm32.cfg
|
||||||
|
$ telnet localhost 4444
|
||||||
|
> reset halt
|
||||||
|
> flash write_image erase dma.hex
|
||||||
|
> reset
|
||||||
|
|
||||||
|
Replace the "jtagkey-tiny.cfg" with whatever JTAG device you are using, and/or
|
||||||
|
replace "stm.cfg" with your respective config file.
|
||||||
|
|
||||||
174
examples/other/dma_mem2mem/dma.c
Normal file
174
examples/other/dma_mem2mem/dma.c
Normal file
@ -0,0 +1,174 @@
|
|||||||
|
/*
|
||||||
|
* This file is part of the libopenstm32 project.
|
||||||
|
*
|
||||||
|
* Copyright (C) 2010 Thomas Otto <tommi@viadmin.org>
|
||||||
|
*
|
||||||
|
* This program is free software: you can redistribute it and/or modify
|
||||||
|
* it under the terms of the GNU General Public License as published by
|
||||||
|
* the Free Software Foundation, either version 3 of the License, or
|
||||||
|
* (at your option) any later version.
|
||||||
|
*
|
||||||
|
* This program is distributed in the hope that it will be useful,
|
||||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
* GNU General Public License for more details.
|
||||||
|
*
|
||||||
|
* You should have received a copy of the GNU General Public License
|
||||||
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||||
|
*/
|
||||||
|
|
||||||
|
#include <libopenstm32/rcc.h>
|
||||||
|
#include <libopenstm32/flash.h>
|
||||||
|
#include <libopenstm32/gpio.h>
|
||||||
|
#include <libopenstm32/usart.h>
|
||||||
|
#include <libopenstm32/dma.h>
|
||||||
|
|
||||||
|
/* Set STM32 to 72 MHz. HSE 16MHz */
|
||||||
|
void clock_setup(void)
|
||||||
|
{
|
||||||
|
/* enable Internal High Speed Oscillator */
|
||||||
|
rcc_osc_on(HSI);
|
||||||
|
rcc_wait_for_osc_ready(HSI);
|
||||||
|
|
||||||
|
/* Select HSI as SYSCLK source. */
|
||||||
|
rcc_set_sysclk_source(SW_SYSCLKSEL_HSICLK);
|
||||||
|
|
||||||
|
/* enable External High Speed Oscillator 16MHz */
|
||||||
|
rcc_osc_on(HSE);
|
||||||
|
rcc_wait_for_osc_ready(HSE);
|
||||||
|
rcc_set_sysclk_source(SW_SYSCLKSEL_HSECLK);
|
||||||
|
|
||||||
|
/* set prescalers for ADC, ABP1, ABP2... make this before touching the PLL */
|
||||||
|
rcc_set_hpre(HPRE_SYSCLK_NODIV); //prescales the AHB clock from the SYSCLK
|
||||||
|
rcc_set_adcpre(ADCPRE_PLCK2_DIV6); //prescales the ADC from the APB2 clock; max 14MHz
|
||||||
|
rcc_set_ppre1(PPRE1_HCLK_DIV2); //prescales the APB1 from the AHB clock; max 36MHz
|
||||||
|
rcc_set_ppre2(PPRE2_HCLK_NODIV); //prescales the APB2 from the AHB clock; max 72MHz
|
||||||
|
|
||||||
|
/* sysclk should run with 72MHz -> 2 Waitstates ; choose 0WS from 0-24MHz, 1WS from 24-48MHz, 2WS from 48-72MHz */
|
||||||
|
flash_set_ws(FLASH_LATENCY_2WS);
|
||||||
|
|
||||||
|
/* Set the PLL multiplication factor to 9. -> 16MHz (external) * 9 (multiplier) / 2 (PLLXTPRE_HSE_CLK_DIV2) = 72MHz */
|
||||||
|
rcc_set_pll_multiplication_factor(PLLMUL_PLL_CLK_MUL9);
|
||||||
|
|
||||||
|
/* Select HSI as PLL source. */
|
||||||
|
rcc_set_pll_source(PLLSRC_HSE_CLK);
|
||||||
|
|
||||||
|
/* divide external frequency by 2 before entering pll (only valid/needed for HSE) */
|
||||||
|
rcc_set_pllxtpre(PLLXTPRE_HSE_CLK_DIV2);
|
||||||
|
|
||||||
|
/* Enable PLL oscillator and wait for it to stabilize. */
|
||||||
|
rcc_osc_on(PLL);
|
||||||
|
rcc_wait_for_osc_ready(PLL);
|
||||||
|
|
||||||
|
/* Select PLL as SYSCLK source. */
|
||||||
|
rcc_set_sysclk_source(SW_SYSCLKSEL_PLLCLK);
|
||||||
|
}
|
||||||
|
|
||||||
|
void usart_setup(void)
|
||||||
|
{
|
||||||
|
/* Enable clocks for GPIO port A (for GPIO_USART1_TX) and USART1. */
|
||||||
|
rcc_peripheral_enable_clock(&RCC_APB2ENR, IOPAEN);
|
||||||
|
rcc_peripheral_enable_clock(&RCC_APB2ENR, USART1EN);
|
||||||
|
|
||||||
|
/* Setup GPIO pin GPIO_USART1_TX/GPIO9 on GPIO port A for transmit. */
|
||||||
|
gpio_set_mode(GPIOA, GPIO_MODE_OUTPUT_50_MHZ,
|
||||||
|
GPIO_CNF_OUTPUT_ALTFN_PUSHPULL, GPIO_USART1_TX);
|
||||||
|
|
||||||
|
/* Setup UART parameters. */
|
||||||
|
usart_set_baudrate(USART1, 115200);
|
||||||
|
usart_set_databits(USART1, 8);
|
||||||
|
usart_set_stopbits(USART1, USART_STOPBITS_1);
|
||||||
|
usart_set_mode(USART1, USART_MODE_TX_RX);
|
||||||
|
usart_set_parity(USART1, USART_PARITY_NONE);
|
||||||
|
usart_set_flow_control(USART1, USART_FLOWCONTROL_NONE);
|
||||||
|
|
||||||
|
/* Finally enable the USART. */
|
||||||
|
usart_enable(USART1);
|
||||||
|
}
|
||||||
|
|
||||||
|
void gpio_setup(void)
|
||||||
|
{
|
||||||
|
/* Enable GPIOB clock. */
|
||||||
|
rcc_peripheral_enable_clock(&RCC_APB2ENR, IOPBEN);
|
||||||
|
|
||||||
|
/* Set GPIO6/7 (in GPIO port B) to 'output push-pull' for the LEDs. */
|
||||||
|
gpio_set_mode(GPIOB, GPIO_MODE_OUTPUT_2_MHZ,
|
||||||
|
GPIO_CNF_OUTPUT_PUSHPULL, GPIO6);
|
||||||
|
gpio_set_mode(GPIOB, GPIO_MODE_OUTPUT_2_MHZ,
|
||||||
|
GPIO_CNF_OUTPUT_PUSHPULL, GPIO7);
|
||||||
|
}
|
||||||
|
|
||||||
|
void my_usart_print_string(u32 usart, char * s)
|
||||||
|
{
|
||||||
|
while (*s != 0) {
|
||||||
|
usart_send(usart, *s);
|
||||||
|
s++;
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
int main(void)
|
||||||
|
{
|
||||||
|
/* Exactly 20 bytes including '0' at the end.
|
||||||
|
We want to transfer 32bit * 5 so it should fit */
|
||||||
|
char s1[20] = "Hello STM MEM2MEM\r\n";
|
||||||
|
char s2[20];
|
||||||
|
|
||||||
|
clock_setup();
|
||||||
|
gpio_setup();
|
||||||
|
usart_setup();
|
||||||
|
|
||||||
|
gpio_clear(GPIOB, GPIO7); /* LED1 on */
|
||||||
|
gpio_set(GPIOB, GPIO6); /* LED2 off */
|
||||||
|
|
||||||
|
my_usart_print_string(USART1, "s1 ");
|
||||||
|
my_usart_print_string(USART1, s1);
|
||||||
|
|
||||||
|
rcc_peripheral_enable_clock(&RCC_AHBENR, DMA1EN);
|
||||||
|
|
||||||
|
/* MEM2MEM mode for channel 1. */
|
||||||
|
dma_enable_mem2mem_mode(DMA1, DMA_CHANNEL1);
|
||||||
|
|
||||||
|
/* Highest priority. */
|
||||||
|
dma_set_priority(DMA1, DMA_CHANNEL1, DMA_CCR1_PL_VERY_HIGH);
|
||||||
|
|
||||||
|
/* 32Bit wide transfer for source and destination. */
|
||||||
|
dma_set_memory_size(DMA1, DMA_CHANNEL1, DMA_CCR1_MSIZE_32BIT);
|
||||||
|
dma_set_peripheral_size(DMA1, DMA_CHANNEL1, DMA_CCR1_PSIZE_32BIT);
|
||||||
|
|
||||||
|
/* After each 32Bit we have to increase the addres because we use RAM. */
|
||||||
|
dma_enable_memory_increment_mode(DMA1, DMA_CHANNEL1);
|
||||||
|
dma_enable_peripheral_increment_mode(DMA1, DMA_CHANNEL1);
|
||||||
|
|
||||||
|
/* We define the source as peripheral. */
|
||||||
|
dma_set_read_from_peripheral(DMA1, DMA_CHANNEL1);
|
||||||
|
|
||||||
|
/* We want to transfer string s1. */
|
||||||
|
dma_set_peripheral_address(DMA1, DMA_CHANNEL1, (u32) &s1);
|
||||||
|
|
||||||
|
/* Destination should be string s2. */
|
||||||
|
dma_set_memory_address(DMA1, DMA_CHANNEL1, (u32) &s2);
|
||||||
|
|
||||||
|
/* Set number of DATA to transfer.
|
||||||
|
Remember that this means not necessary bytes but MSIZE or PSIZE
|
||||||
|
depending from your source device. */
|
||||||
|
dma_set_number_of_data(DMA1, DMA_CHANNEL1, 5);
|
||||||
|
|
||||||
|
/* Start DMA transfer. */
|
||||||
|
dma_enable_channel(DMA1, DMA_CHANNEL1);
|
||||||
|
|
||||||
|
/* TODO: write a function to get the interrupt flags. */
|
||||||
|
while(!(DMA_ISR(DMA1) & 0x0000001))
|
||||||
|
{
|
||||||
|
}
|
||||||
|
|
||||||
|
dma_disable_channel(DMA1, DMA_CHANNEL1);
|
||||||
|
|
||||||
|
/* String s1 should now already be transferred to s2. */
|
||||||
|
my_usart_print_string(USART1, "s2 ");
|
||||||
|
my_usart_print_string(USART1, s2);
|
||||||
|
|
||||||
|
gpio_clear(GPIOB, GPIO6); /* LED2 on */
|
||||||
|
while(1); /* Halt. */
|
||||||
|
|
||||||
|
return 0;
|
||||||
|
}
|
||||||
31
examples/other/dma_mem2mem/dma.ld
Normal file
31
examples/other/dma_mem2mem/dma.ld
Normal file
@ -0,0 +1,31 @@
|
|||||||
|
/*
|
||||||
|
* This file is part of the libopenstm32 project.
|
||||||
|
*
|
||||||
|
* Copyright (C) 2010 Thomas Otto <tommi@viadmin.org>
|
||||||
|
*
|
||||||
|
* This program is free software: you can redistribute it and/or modify
|
||||||
|
* it under the terms of the GNU General Public License as published by
|
||||||
|
* the Free Software Foundation, either version 3 of the License, or
|
||||||
|
* (at your option) any later version.
|
||||||
|
*
|
||||||
|
* This program is distributed in the hope that it will be useful,
|
||||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
* GNU General Public License for more details.
|
||||||
|
*
|
||||||
|
* You should have received a copy of the GNU General Public License
|
||||||
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||||
|
*/
|
||||||
|
|
||||||
|
/* Linker script for an STM32F103RBT6 board (128K flash, 20K RAM). */
|
||||||
|
|
||||||
|
/* Define memory regions. */
|
||||||
|
MEMORY
|
||||||
|
{
|
||||||
|
rom (rx) : ORIGIN = 0x08000000, LENGTH = 128K
|
||||||
|
ram (rwx) : ORIGIN = 0x20000000, LENGTH = 20K
|
||||||
|
}
|
||||||
|
|
||||||
|
/* Include the common ld script from libopenstm32. */
|
||||||
|
INCLUDE libopenstm32.ld
|
||||||
|
|
||||||
Loading…
x
Reference in New Issue
Block a user