jackcartersmith/blackmagic
1
0
Fork 0
Code Issues Pull Requests Releases Activity

Fix misspellings using codespell tool

Browse Source
This commit is contained in:
Anatol Pomozov 2015-12-11 08:46:44 -08:00
parent 20e1ee174d
commit ae41782e1a
25 changed files with 31 additions and 31 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

4
README.md
View File

@ -66,11 +66,11 @@ The most heavily tested toolchain is "gcc-arm-embedded"
https://launchpad.net/gcc-arm-embedded
Other toolchains _should_ work, but have not been nearly as well tested.
Toolchains targetting linux, such as "gcc-arm-linux-gnu" or the like are
Toolchains targeting linux, such as "gcc-arm-linux-gnu" or the like are
_not_ appropriate.
_NOTE_ We recommend, that you use g-a-c version 2.8 2014q3 or newer
to build all platforms covered by libopencm3 succesfully.
to build all platforms covered by libopencm3 successfully.
Building
--------

2
include/libopencm3/cm3/mpu.h
View File

@ -57,7 +57,7 @@
/** @defgroup CM3_mpu_type MPU TYPE register fields
* @ingroup CM3_mpu_defines
* The MPU_TYPE register is always avilable, even if the MPU is not implemented.
* The MPU_TYPE register is always available, even if the MPU is not implemented.
* In that case, the DREGION field will read as 0.
*@{*/
/** v6m/v7m only support a unified MPU (IREGION always 0) */

2
include/libopencm3/cm3/scb.h
View File

@ -215,7 +215,7 @@
#define SCB_AIRCR_VECTKEYSTAT (0xFFFF << SCB_AIRCR_VECTKEYSTAT_LSB)
#define SCB_AIRCR_VECTKEY (0x05FA << SCB_AIRCR_VECTKEYSTAT_LSB)
/* ENDIANESS Data endianness bit */
/* ENDIANNESS Data endianness bit */
#define SCB_AIRCR_ENDIANESS (1 << 15)
/* Those defined only on ARMv7 and above */

2
include/libopencm3/lm4f/uart.h
View File

@ -319,7 +319,7 @@
#define UART_DMACTL_DMAERR (1 << 2)
/** Transmit DMA enable */
#define UART_DMACTL_TXDMAE (1 << 1)
/** Recieve DMA enable */
/** Receive DMA enable */
#define UART_DMACTL_RXDMAE (1 << 0)
/* =============================================================================

2
include/libopencm3/stm32/common/adc_common_v1.h
View File

@ -287,7 +287,7 @@ specific memorymap.h header before including this header file.*/
/* DMA: Direct memory access mode. (ADC1 and ADC3 only!) */
#define ADC_CR2_DMA (1 << 8)
/* CONT: Continous conversion. */
/* CONT: Continuous conversion. */
#define ADC_CR2_CONT (1 << 1)
/* ADON: A/D converter On/Off. */

2
include/libopencm3/stm32/common/i2c_common_all.h
View File

@ -163,7 +163,7 @@ specific memorymap.h header before including this header file.*/
/* Note: Bits [7:6] are reserved, and forced to 0 by hardware. */
/* FREQ[5:0]: Peripheral clock frequency (valid values: 2-36 MHz, 2-42 MHz for
* STM32F4 respectivly) */
* STM32F4 respectively) */
/****************************************************************************/
/** @defgroup i2c_clock I2C clock frequency settings
@ingroup i2c_defines

2
include/libopencm3/stm32/f1/adc.h
View File

@ -273,7 +273,7 @@ and ADC2
/* CAL: A/D Calibration. */
#define ADC_CR2_CAL (1 << 2)
/* CONT: Continous conversion. */
/* CONT: Continuous conversion. */
#define ADC_CR2_CONT (1 << 1)
/* ADON: A/D converter On/Off. */

2
include/libopencm3/stm32/f3/usart.h
View File

@ -252,7 +252,7 @@
/* ADDM7:7-bit Address Detection/4-bit Address Detection */
#define USART_CR2_ADDM7 (1 << 4)
/* ADD[3:0]: Addres of the usart node
/* ADD[3:0]: Address of the usart node
#define USART_CR2_ADD_MASK 0xF */
/* --- USART_CR3 values ---------------------------------------------------- */

2
include/libopencm3/stm32/f4/adc.h
View File

@ -241,7 +241,7 @@ LGPL License Terms @ref lgpl_license
/* Note: Bits [7:2] are reserved and must be kept at reset value. */
/* CONT: Continous conversion. */
/* CONT: Continuous conversion. */
#define ADC_CR2_CONT (1 << 1)
/* ADON: A/D converter On/Off. */

2
include/libopencm3/usb/usbd.h
View File

@ -157,7 +157,7 @@ extern void usbd_ep_setup(usbd_device *usbd_dev, uint8_t addr, uint8_t type,
/** Write a packet
* @param addr EP address (direction is ignored)
* @param len # of bytes
* @return 0 if failed, len if succesful
* @return 0 if failed, len if successful
*/
extern uint16_t usbd_ep_write_packet(usbd_device *usbd_dev, uint8_t addr,
const void *buf, uint16_t len);

4
include/libopencm3/usb/usbstd.h
View File

@ -13,7 +13,7 @@ Gareth McMullin <gareth@blacksphere.co.nz>
@date 10 March 2013
A set of structure definitions for the USB control structures
defined in chapter 9 of the "Univeral Serial Bus Specification Revision 2.0"
defined in chapter 9 of the "Universal Serial Bus Specification Revision 2.0"
Available from the USB Implementers Forum - http://www.usb.org/
LGPL License Terms @ref lgpl_license
@ -48,7 +48,7 @@ LGPL License Terms @ref lgpl_license
/*
* This file contains structure definitions for the USB control structures
* defined in chapter 9 of the "Univeral Serial Bus Specification Revision 2.0"
* defined in chapter 9 of the "Universal Serial Bus Specification Revision 2.0"
* Available from the USB Implementers Forum - http://www.usb.org/
*/

2
lib/cm3/dwt.c
View File

@ -27,7 +27,7 @@
* benchmarking performance of the code. If function fails, the cycle counter
* isn't available on this architecture.
*
* @returnd true, if success
* @return true, if success
*/
bool dwt_enable_cycle_counter(void)
{

2
lib/lm4f/gpio.c
View File

@ -502,7 +502,7 @@ void gpio_toggle(uint32_t gpioport, uint8_t gpios)
* serviced_irq |= GPIO4;
* }
*
* // Clear the interupt flag for the processed IRQs
* // Clear the interrupt flag for the processed IRQs
* gpio_clear_interrupt_flag(GPIOF, serviced_irqs);
* }
* @endcode

2
lib/lm4f/rcc.c
View File

@ -92,7 +92,7 @@ Alexandru Gagniuc <mr.nuke.me@gmail.com>
* internal 16MHz oscillator.
*
* High-level routines update the system clock automatically.
* For read access, it is recommended to acces this variable via
* For read access, it is recommended to access this variable via
* @code
* rcc_get_system_clock_frequency();
* @endcode

4
lib/lm4f/uart.c
View File

@ -256,7 +256,7 @@ void uart_clock_from_sysclk(uint32_t uart)
*
* \brief <b>Sending and receiving data through the UART</b>
*
* Primitives for sending and recieving data are provided, @ref uart_send() and
* Primitives for sending and receiving data are provided, @ref uart_send() and
* @ref uart_recv(). These primitives do not check if data can be transmitted
* or wait for data. If waiting until data is available or can be transmitted is
* desired, blocking primitives are also available, @ref uart_send_blocking()
@ -407,7 +407,7 @@ uint16_t uart_recv_blocking(uint32_t uart)
* serviced_irq |= UART_INT_CTS;
* }
*
* // Clear the interupt flag for the processed IRQs
* // Clear the interrupt flag for the processed IRQs
* uart_clear_interrupt_flag(UART0, serviced_irqs);
* }
* @endcode

2
lib/stm32/common/crypto_common_f24.c
View File

@ -93,7 +93,7 @@ void crypto_set_datatype(enum crypto_datatype datatype)
}
/**
* @brief Set the algoritm for Encryption/decryption
* @brief Set the algorithm for Encryption/decryption
*
*@param[in] mode enum crypto_mode Mode of execution
*/

2
lib/stm32/common/dma_common_l1f013.c
View File

@ -236,7 +236,7 @@ After the number of bytes/words to be transferred has been completed, the
original transfer block size, memory and peripheral base addresses are
reloaded and the process repeats.
@note This cannot be used with memory to memory mode, which is explictly
@note This cannot be used with memory to memory mode, which is explicitly
disabled here.
@param[in] dma unsigned int32. DMA controller base address: DMA1 or DMA2

2
lib/stm32/common/st_usbfs_core.c
View File

@ -164,7 +164,7 @@ uint8_t st_usbfs_ep_stall_get(usbd_device *dev, uint8_t addr)
void st_usbfs_ep_nak_set(usbd_device *dev, uint8_t addr, uint8_t nak)
{
(void)dev;
/* It does not make sence to force NAK on IN endpoints. */
/* It does not make sense to force NAK on IN endpoints. */
if (addr & 0x80) {
return;
}

2
lib/stm32/common/usart_common_all.c
View File

@ -64,7 +64,7 @@ void usart_set_baudrate(uint32_t usart, uint32_t baud)
/*
* Yes it is as simple as that. The reference manual is
* talking about fractional calculation but it seems to be only
* marketting babble to sound awesome. It is nothing else but a
* marketing babble to sound awesome. It is nothing else but a
* simple divider to generate the correct baudrate.
*
* Note: We round() the value rather than floor()ing it, for more

2
lib/stm32/f0/adc.c
View File

@ -145,7 +145,7 @@ void adc_disable_discontinuous_mode(uint32_t adc)
/*---------------------------------------------------------------------------*/
/** @brief ADC Set conversion operation mode
*
* @note on SEQUENTIAL mode, the trigger event is neccesary to start conversion.
* @note on SEQUENTIAL mode, the trigger event is necessary to start conversion.
* @par
*
* @param[in] adc Unsigned int32. ADC base address (@ref adc_reg_base)

2
lib/usb/usb_efm32lg.c
View File

@ -102,7 +102,7 @@ static void efm32lg_ep_setup(usbd_device *usbd_dev, uint8_t addr, uint8_t type,
{
/*
* Configure endpoint address and type. Allocate FIFO memory for
* endpoint. Install callback funciton.
* endpoint. Install callback function.
*/
uint8_t dir = addr & 0x80;
addr &= 0x7f;

4
lib/usb/usb_fx07_common.c
View File

@ -44,7 +44,7 @@ void stm32fx07_ep_setup(usbd_device *usbd_dev, uint8_t addr, uint8_t type,
{
/*
* Configure endpoint address and type. Allocate FIFO memory for
* endpoint. Install callback funciton.
* endpoint. Install callback function.
*/
uint8_t dir = addr & 0x80;
addr &= 0x7f;
@ -179,7 +179,7 @@ uint8_t stm32fx07_ep_stall_get(usbd_device *usbd_dev, uint8_t addr)
void stm32fx07_ep_nak_set(usbd_device *usbd_dev, uint8_t addr, uint8_t nak)
{
/* It does not make sence to force NAK on IN endpoints. */
/* It does not make sense to force NAK on IN endpoints. */
if (addr & 0x80) {
return;
}

2
lib/usb/usb_standard.c
View File

@ -193,7 +193,7 @@ static int usb_standard_get_descriptor(usbd_device *usbd_dev,
return USBD_REQ_NOTSUPP;
}
/* Ths string is returned as UTF16, hence the
/* This string is returned as UTF16, hence the
* multiplication
*/
sd->bLength = strlen(usbd_dev->strings[array_idx]) * 2 +

4
mk/README
View File

@ -54,7 +54,7 @@ gcc
-------------------------------------------------------------------------------
This module adds an extended support for GCC toolchain. This adds rules,
neccessary for compiling C and C++ files into elf binary, and rules for
necessary for compiling C and C++ files into elf binary, and rules for
generation of bin, hex, or srec output files for flashing.
Variables to control the build process (should be set in your makefile):
@ -109,7 +109,7 @@ OPENCM3_LIBNAME (replaced)
! Ensure that you have line 'LDLIBS += -l$(OPENCM3_LIBNAME)' in your makefile.
! Ensure that you have line 'LDFLAGS += -L$(OPENCM3_DIR)/lib' in your makefile.
! Ensure that you have rule '$(OPENCM3_DIR)/lib/lib$(OPENCM3_LIBNAME).a:'
to be the library archive succesfully built when needed.
to be the library archive successfully built when needed.
Temporary variables that you should not use in your makefile:
-------------------------------------------------------------

4
scripts/irq2nvic_h
View File

@ -23,7 +23,7 @@ numbers.
Code generation is chosen here because the resulting C code needs to be very
repetetive (definition of the IRQ numbers, function prototypes, weak fallback
definition and vector table definition), all being very repetitive. No portable
method to achive the same thing with C preprocessor is known to the author.
method to achieve the same thing with C preprocessor is known to the author.
(Neither is any non-portable method, for that matter.)"""
import sys
@ -149,7 +149,7 @@ def main():
remove = False
infile = sys.argv[1]
if not infile.startswith('./include/libopencm3/') or not infile.endswith('/irq.json'):
raise ValueError("Arguent must match ./include/libopencm3/**/irq.json")
raise ValueError("Argument must match ./include/libopencm3/**/irq.json")
nvic_h = infile.replace('irq.json', 'nvic.h')
vector_nvic_c = infile.replace('./include/libopencm3/', './lib/').replace('irq.json', 'vector_nvic.c')
cmsis = infile.replace('irq.json', 'irqhandlers.h').replace('/libopencm3/', '/libopencmsis/')