Update F1 libs with new header file locations.
This commit is contained in:
parent
a4935eef57
commit
ce7dd46aef
@ -31,7 +31,7 @@
|
|||||||
* reg16 = adc_read(ADC1, ADC_CH_0);
|
* reg16 = adc_read(ADC1, ADC_CH_0);
|
||||||
*/
|
*/
|
||||||
|
|
||||||
#include <libopencm3/stm32/adc.h>
|
#include <libopencm3/stm32/f1/adc.h>
|
||||||
|
|
||||||
void rcc_set_adc_clk(u32 prescaler)
|
void rcc_set_adc_clk(u32 prescaler)
|
||||||
{
|
{
|
||||||
|
@ -18,7 +18,7 @@
|
|||||||
*/
|
*/
|
||||||
|
|
||||||
#include <libopencm3/stm32/can.h>
|
#include <libopencm3/stm32/can.h>
|
||||||
#include <libopencm3/stm32/rcc.h>
|
#include <libopencm3/stm32/f1/rcc.h>
|
||||||
|
|
||||||
void can_reset(u32 canport)
|
void can_reset(u32 canport)
|
||||||
{
|
{
|
||||||
|
@ -17,7 +17,7 @@
|
|||||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||||
*/
|
*/
|
||||||
|
|
||||||
#include <libopencm3/stm32/dma.h>
|
#include <libopencm3/stm32/f1/dma.h>
|
||||||
|
|
||||||
void dma_enable_mem2mem_mode(u32 dma, u8 channel)
|
void dma_enable_mem2mem_mode(u32 dma, u8 channel)
|
||||||
{
|
{
|
||||||
|
@ -17,7 +17,7 @@
|
|||||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||||
*/
|
*/
|
||||||
|
|
||||||
#include <libopencm3/stm32/ethernet.h>
|
#include <libopencm3/stm32/f1/ethernet.h>
|
||||||
|
|
||||||
void eth_smi_write(u8 phy, u8 reg, u16 data)
|
void eth_smi_write(u8 phy, u8 reg, u16 data)
|
||||||
{
|
{
|
||||||
|
@ -18,7 +18,7 @@
|
|||||||
*/
|
*/
|
||||||
|
|
||||||
#include <libopencm3/stm32/exti.h>
|
#include <libopencm3/stm32/exti.h>
|
||||||
#include <libopencm3/stm32/gpio.h>
|
#include <libopencm3/stm32/f1/gpio.h>
|
||||||
|
|
||||||
void exti_set_trigger(u32 extis, exti_trigger_type trig)
|
void exti_set_trigger(u32 extis, exti_trigger_type trig)
|
||||||
{
|
{
|
||||||
|
@ -18,7 +18,7 @@
|
|||||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||||
*/
|
*/
|
||||||
|
|
||||||
#include <libopencm3/stm32/flash.h>
|
#include <libopencm3/stm32/f1/flash.h>
|
||||||
|
|
||||||
void flash_prefetch_buffer_enable(void)
|
void flash_prefetch_buffer_enable(void)
|
||||||
{
|
{
|
||||||
|
@ -34,7 +34,7 @@
|
|||||||
* - GPIO remapping support
|
* - GPIO remapping support
|
||||||
*/
|
*/
|
||||||
|
|
||||||
#include <libopencm3/stm32/gpio.h>
|
#include <libopencm3/stm32/f1/gpio.h>
|
||||||
|
|
||||||
void gpio_set_mode(u32 gpioport, u8 mode, u8 cnf, u16 gpios)
|
void gpio_set_mode(u32 gpioport, u8 mode, u8 cnf, u16 gpios)
|
||||||
{
|
{
|
||||||
|
@ -17,7 +17,7 @@
|
|||||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||||
*/
|
*/
|
||||||
|
|
||||||
#include <libopencm3/stm32/nvic.h>
|
#include <libopencm3/stm32/f1/nvic.h>
|
||||||
|
|
||||||
void nvic_enable_irq(u8 irqn)
|
void nvic_enable_irq(u8 irqn)
|
||||||
{
|
{
|
||||||
|
@ -19,8 +19,8 @@
|
|||||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||||
*/
|
*/
|
||||||
|
|
||||||
#include <libopencm3/stm32/rcc.h>
|
#include <libopencm3/stm32/f1/rcc.h>
|
||||||
#include <libopencm3/stm32/flash.h>
|
#include <libopencm3/stm32/f1/flash.h>
|
||||||
|
|
||||||
/* Set the default ppre1 and ppre2 peripheral clock frequencies after reset */
|
/* Set the default ppre1 and ppre2 peripheral clock frequencies after reset */
|
||||||
u32 rcc_ppre1_frequency = 8000000;
|
u32 rcc_ppre1_frequency = 8000000;
|
||||||
|
@ -18,8 +18,8 @@
|
|||||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||||
*/
|
*/
|
||||||
|
|
||||||
#include <libopencm3/stm32/rcc.h>
|
#include <libopencm3/stm32/f1/rcc.h>
|
||||||
#include <libopencm3/stm32/rtc.h>
|
#include <libopencm3/stm32/f1/rtc.h>
|
||||||
#include <libopencm3/stm32/pwr.h>
|
#include <libopencm3/stm32/pwr.h>
|
||||||
|
|
||||||
void rtc_awake_from_off(osc_t clock_source)
|
void rtc_awake_from_off(osc_t clock_source)
|
||||||
|
@ -17,7 +17,7 @@
|
|||||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||||
*/
|
*/
|
||||||
|
|
||||||
#include <libopencm3/stm32/systick.h>
|
#include <libopencm3/stm32/f1/systick.h>
|
||||||
|
|
||||||
void systick_set_reload(u32 value)
|
void systick_set_reload(u32 value)
|
||||||
{
|
{
|
||||||
|
@ -26,7 +26,7 @@
|
|||||||
*/
|
*/
|
||||||
|
|
||||||
#include <libopencm3/stm32/timer.h>
|
#include <libopencm3/stm32/timer.h>
|
||||||
#include <libopencm3/stm32/rcc.h>
|
#include <libopencm3/stm32/f1/rcc.h>
|
||||||
|
|
||||||
void timer_reset(u32 timer_peripheral)
|
void timer_reset(u32 timer_peripheral)
|
||||||
{
|
{
|
||||||
|
@ -17,7 +17,7 @@
|
|||||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||||
*/
|
*/
|
||||||
|
|
||||||
#include <libopencm3/stm32/rcc.h>
|
#include <libopencm3/stm32/f1/rcc.h>
|
||||||
|
|
||||||
#include <libopencm3/stm32/usart.h>
|
#include <libopencm3/stm32/usart.h>
|
||||||
|
|
||||||
|
@ -77,9 +77,9 @@ void gpio_set_output_options(u32 gpioport, u8 otype, u8 speed, u16 gpios)
|
|||||||
|
|
||||||
for (i = 0; i < 16; i++) {
|
for (i = 0; i < 16; i++) {
|
||||||
if (!((1 << i) & gpios))
|
if (!((1 << i) & gpios))
|
||||||
continue
|
continue;
|
||||||
ospeedr &= ~GPIO_OSPEEDR_MASK(i);
|
ospeedr &= ~GPIO_OSPEED_MASK(i);
|
||||||
ospeedr |= GPIO_OSPEEDR(i, mode);
|
ospeedr |= GPIO_OSPEED(i, speed);
|
||||||
}
|
}
|
||||||
|
|
||||||
GPIO_OSPEEDR(gpioport) = ospeedr;
|
GPIO_OSPEEDR(gpioport) = ospeedr;
|
||||||
@ -95,14 +95,14 @@ void gpio_set_af(u32 gpioport, u8 alt_func_num, u16 gpios)
|
|||||||
|
|
||||||
for (i = 0; i < 8; i++) {
|
for (i = 0; i < 8; i++) {
|
||||||
if (!((1 << i) & gpios))
|
if (!((1 << i) & gpios))
|
||||||
continue
|
continue;
|
||||||
afrl &= GPIO_AFR_MASK(i);
|
afrl &= GPIO_AFR_MASK(i);
|
||||||
afrl |= GPIO_AFR(i, alt_func_num);
|
afrl |= GPIO_AFR(i, alt_func_num);
|
||||||
}
|
}
|
||||||
|
|
||||||
for (i = 8; i < 16; i++) {
|
for (i = 8; i < 16; i++) {
|
||||||
if (!((1 << i) & gpios))
|
if (!((1 << i) & gpios))
|
||||||
continue
|
continue;
|
||||||
afrl &= GPIO_AFR_MASK(i-8);
|
afrl &= GPIO_AFR_MASK(i-8);
|
||||||
afrh |= GPIO_AFR(i-8, alt_func_num);
|
afrh |= GPIO_AFR(i-8, alt_func_num);
|
||||||
}
|
}
|
||||||
|
Loading…
x
Reference in New Issue
Block a user