jackcartersmith/blackmagic
1
0
Fork 0
Code Issues Pull Requests Releases Activity

Added simple adc example for lisa/m 2.

Browse Source
This commit is contained in:
Piotr Esden-Tempski 2012-08-26 14:07:04 -07:00
parent 7373bfcb9b
commit d1cc8ca2b3
3 changed files with 198 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

27
examples/stm32/f1/lisa-m-2/adc/Makefile Normal file
View File

@ -0,0 +1,27 @@
##
## This file is part of the libopencm3 project.
##
## Copyright (C) 2009 Uwe Hermann <uwe@hermann-uwe.de>
##
## This library is free software: you can redistribute it and/or modify
## it under the terms of the GNU Lesser General Public License as published by
## the Free Software Foundation, either version 3 of the License, or
## (at your option) any later version.
##
## This library is distributed in the hope that it will be useful,
## but WITHOUT ANY WARRANTY; without even the implied warranty of
## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
## GNU Lesser General Public License for more details.
##
## You should have received a copy of the GNU Lesser General Public License
## along with this library. If not, see <http://www.gnu.org/licenses/>.
##
BINARY = adc
# Comment the following line if you _don't_ have luftboot flashed!
LDFLAGS += -Wl,-Ttext=0x8002000
CFLAGS += -std=c99
LDSCRIPT = ../lisa-m.ld
include ../../Makefile.include

9
examples/stm32/f1/lisa-m-2/adc/README Normal file
View File

@ -0,0 +1,9 @@
------------------------------------------------------------------------------
README
------------------------------------------------------------------------------
This is a simple polling example that sends the value read out from the
temperature sensor ADC channel of the STM32 to the USART2.
The terminal settings for the receiving device/PC are 115200 8n1.

162
examples/stm32/f1/lisa-m-2/adc/adc.c Normal file
View File

@ -0,0 +1,162 @@
/*
* This file is part of the libopencm3 project.
*
* Copyright (C) 2010 Thomas Otto <tommi@viadmin.org>
* Copyright (C) 2012 Piotr Esden-Tempski <piotr@esden.net>
*
* This library is free software: you can redistribute it and/or modify
* it under the terms of the GNU Lesser General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public License
* along with this library. If not, see <http://www.gnu.org/licenses/>.
*/
#include <libopencm3/stm32/f1/rcc.h>
#include <libopencm3/stm32/f1/flash.h>
#include <libopencm3/stm32/f1/gpio.h>
#include <libopencm3/stm32/f1/adc.h>
#include <libopencm3/stm32/usart.h>
void usart_setup(void)
{
/* Enable clocks for GPIO port A (for GPIO_USART1_TX) and USART1. */
rcc_peripheral_enable_clock(&RCC_APB2ENR, RCC_APB2ENR_IOPAEN);
rcc_peripheral_enable_clock(&RCC_APB1ENR, RCC_APB1ENR_USART2EN);
/* Setup GPIO pin GPIO_USART1_TX/GPIO9 on GPIO port A for transmit. */
gpio_set_mode(GPIOA, GPIO_MODE_OUTPUT_50_MHZ,
GPIO_CNF_OUTPUT_ALTFN_PUSHPULL, GPIO_USART2_TX);
/* Setup UART parameters. */
usart_set_baudrate(USART2, 115200);
usart_set_databits(USART2, 8);
usart_set_stopbits(USART2, USART_STOPBITS_1);
usart_set_mode(USART2, USART_MODE_TX_RX);
usart_set_parity(USART2, USART_PARITY_NONE);
usart_set_flow_control(USART2, USART_FLOWCONTROL_NONE);
/* Finally enable the USART. */
usart_enable(USART2);
}
void gpio_setup(void)
{
/* Enable GPIO clocks. */
rcc_peripheral_enable_clock(&RCC_APB2ENR, RCC_APB2ENR_IOPAEN);
rcc_peripheral_enable_clock(&RCC_APB2ENR, RCC_APB2ENR_IOPCEN);
/* Setup the LEDs. */
gpio_set_mode(GPIOA, GPIO_MODE_OUTPUT_2_MHZ,
GPIO_CNF_OUTPUT_PUSHPULL, GPIO8);
gpio_set_mode(GPIOC, GPIO_MODE_OUTPUT_2_MHZ,
GPIO_CNF_OUTPUT_PUSHPULL, GPIO15);
}
void adc_setup(void)
{
int i;
rcc_peripheral_enable_clock(&RCC_APB2ENR, RCC_APB2ENR_ADC1EN);
/* Make sure the ADC doesn't run during config. */
adc_off(ADC1);
/* We configure everything for one single conversion. */
adc_disable_scan_mode(ADC1);
adc_set_single_conversion_mode(ADC1);
adc_enable_discontinous_mode_regular(ADC1);
adc_disable_external_trigger_regular(ADC1);
adc_set_right_aligned(ADC1);
/* We want to read the temperature sensor, so we have to enable it. */
adc_enable_temperature_sensor(ADC1);
adc_set_conversion_time_on_all_channels(ADC1, ADC_SMPR_SMP_28DOT5CYC);
adc_on(ADC1);
/* Wait for ADC starting up. */
for (i = 0; i < 800000; i++) /* Wait a bit. */
__asm__("nop");
adc_reset_calibration(ADC1);
adc_calibration(ADC1);
}
void my_usart_print_int(u32 usart, int value)
{
s8 i;
u8 nr_digits = 0;
char buffer[25];
if (value < 0) {
usart_send_blocking(usart, '-');
value = value * -1;
}
while (value > 0) {
buffer[nr_digits++] = "0123456789"[value % 10];
value /= 10;
}
for (i = nr_digits; i >= 0; i--) {
usart_send_blocking(usart, buffer[i]);
}
usart_send_blocking(usart, '\r');
}
int main(void)
{
u8 channel_array[16];
u16 temperature = 0;
rcc_clock_setup_in_hse_12mhz_out_72mhz();
gpio_setup();
usart_setup();
adc_setup();
gpio_set(GPIOA, GPIO8); /* LED1 on */
gpio_set(GPIOC, GPIO15); /* LED2 off */
/* Send a message on USART1. */
usart_send_blocking(USART2, 's');
usart_send_blocking(USART2, 't');
usart_send_blocking(USART2, 'm');
usart_send_blocking(USART2, '\r');
usart_send_blocking(USART2, '\n');
/* Select the channel we want to convert. 16=temperature_sensor. */
channel_array[0] = 16;
adc_set_regular_sequence(ADC1, 1, channel_array);
/* Continously convert and poll the temperature ADC. */
while (1) {
/*
* If the ADC_CR2_ON bit is already set -> setting it another time
* starts the conversion.
*/
adc_on(ADC1);
/* Wait for end of conversion. */
while (!(ADC_SR(ADC1) & ADC_SR_EOC));
temperature = ADC_DR(ADC1);
/*
* That's actually not the real temperature - you have to compute it
* as described in the datasheet.
*/
my_usart_print_int(USART2, temperature);
gpio_toggle(GPIOA, GPIO8); /* LED2 on */
}
return 0;
}