tests: gadget0: add stm32f3-disco
Another readily available board with a user USB port, and this one lets you test the st usbfs peripheral on a device with trace facilities.
This commit is contained in:
Karl Palsson
parent
b25a1ae0eb
commit
dc64929b78
44
tests/gadget-zero/Makefile.stm32f3-disco
Normal file
44
tests/gadget-zero/Makefile.stm32f3-disco
Normal file
@ -0,0 +1,44 @@
|
|||||||
|
##
|
||||||
|
## This file is part of the libopencm3 project.
|
||||||
|
##
|
||||||
|
## This library is free software: you can redistribute it and/or modify
|
||||||
|
## it under the terms of the GNU Lesser General Public License as published by
|
||||||
|
## the Free Software Foundation, either version 3 of the License, or
|
||||||
|
## (at your option) any later version.
|
||||||
|
##
|
||||||
|
## This library is distributed in the hope that it will be useful,
|
||||||
|
## but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
## GNU Lesser General Public License for more details.
|
||||||
|
##
|
||||||
|
## You should have received a copy of the GNU Lesser General Public License
|
||||||
|
## along with this library. If not, see <http://www.gnu.org/licenses/>.
|
||||||
|
##
|
||||||
|
|
||||||
|
BOARD = stm32f3-disco
|
||||||
|
PROJECT = usb-gadget0-$(BOARD)
|
||||||
|
BUILD_DIR = bin-$(BOARD)
|
||||||
|
|
||||||
|
SHARED_DIR = ../shared
|
||||||
|
|
||||||
|
CFILES = main-$(BOARD).c
|
||||||
|
CFILES += usb-gadget0.c trace.c trace_stdio.c
|
||||||
|
CFILES += delay.c
|
||||||
|
|
||||||
|
VPATH += $(SHARED_DIR)
|
||||||
|
|
||||||
|
INCLUDES += $(patsubst %,-I%, . $(SHARED_DIR))
|
||||||
|
|
||||||
|
OPENCM3_DIR=../..
|
||||||
|
|
||||||
|
### This section can go to an arch shared rules eventually...
|
||||||
|
LDSCRIPT = ../../lib/stm32/f3/stm32f303xc.ld
|
||||||
|
OPENCM3_LIB = opencm3_stm32f3
|
||||||
|
OPENCM3_DEFS = -DSTM32F3
|
||||||
|
FP_FLAGS ?= -mfloat-abi=hard -mfpu=fpv4-sp-d16
|
||||||
|
ARCH_FLAGS = -mthumb -mcpu=cortex-m4 $(FP_FLAGS)
|
||||||
|
#OOCD_INTERFACE = stlink-v2
|
||||||
|
#OOCD_TARGET = stm32f3x
|
||||||
|
OOCD_FILE = openocd.stm32f3-disco.cfg
|
||||||
|
|
||||||
|
include ../rules.mk
|
||||||
93
tests/gadget-zero/main-stm32f3-disco.c
Normal file
93
tests/gadget-zero/main-stm32f3-disco.c
Normal file
@ -0,0 +1,93 @@
|
|||||||
|
/*
|
||||||
|
* This file is part of the libopencm3 project.
|
||||||
|
*
|
||||||
|
* Copyright (C) 2015 Karl Palsson <karlp@tweak.net.au>
|
||||||
|
*
|
||||||
|
* This library is free software: you can redistribute it and/or modify
|
||||||
|
* it under the terms of the GNU Lesser General Public License as published by
|
||||||
|
* the Free Software Foundation, either version 3 of the License, or
|
||||||
|
* (at your option) any later version.
|
||||||
|
*
|
||||||
|
* This library is distributed in the hope that it will be useful,
|
||||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
* GNU Lesser General Public License for more details.
|
||||||
|
*
|
||||||
|
* You should have received a copy of the GNU Lesser General Public License
|
||||||
|
* along with this library. If not, see <http://www.gnu.org/licenses/>.
|
||||||
|
*/
|
||||||
|
|
||||||
|
/* "generic" could be any L1 board, but this file is pre-configured for the
|
||||||
|
* libopencm3-tests "hw1" board, with an stm32l151c8-A part.
|
||||||
|
*/
|
||||||
|
|
||||||
|
#include <libopencm3/cm3/nvic.h>
|
||||||
|
#include <libopencm3/stm32/gpio.h>
|
||||||
|
#include <libopencm3/stm32/flash.h>
|
||||||
|
#include <libopencm3/stm32/rcc.h>
|
||||||
|
#include <libopencm3/stm32/syscfg.h>
|
||||||
|
|
||||||
|
#include <stdio.h>
|
||||||
|
#include "usb-gadget0.h"
|
||||||
|
|
||||||
|
#define ER_DEBUG
|
||||||
|
#ifdef ER_DEBUG
|
||||||
|
#define ER_DPRINTF(fmt, ...) \
|
||||||
|
do { printf(fmt, ## __VA_ARGS__); } while (0)
|
||||||
|
#else
|
||||||
|
#define ER_DPRINTF(fmt, ...) \
|
||||||
|
do { } while (0)
|
||||||
|
#endif
|
||||||
|
|
||||||
|
const struct rcc_clock_scale this_clock_config = {
|
||||||
|
/* 72MHZ from 8MHZ external clock from stlink MCO */
|
||||||
|
.pllsrc = RCC_CFGR_PLLSRC_HSE_PREDIV,
|
||||||
|
.pllmul = RCC_CFGR_PLLMUL_MUL9,
|
||||||
|
.plldiv = RCC_CFGR2_PREDIV_NODIV,
|
||||||
|
.usbdiv1 = false,
|
||||||
|
.flash_waitstates = 2,
|
||||||
|
.hpre = RCC_CFGR_HPRE_DIV_NONE,
|
||||||
|
.ppre1 = RCC_CFGR_PPRE1_DIV_2,
|
||||||
|
.ppre2 = RCC_CFGR_PPRE2_DIV_NONE,
|
||||||
|
.ahb_frequency = 72e6,
|
||||||
|
.apb1_frequency = 32e6,
|
||||||
|
.apb2_frequency = 72e6,
|
||||||
|
};
|
||||||
|
|
||||||
|
|
||||||
|
int main(void)
|
||||||
|
{
|
||||||
|
rcc_periph_clock_enable(RCC_GPIOE);
|
||||||
|
gpio_mode_setup(GPIOE, GPIO_MODE_OUTPUT, GPIO_PUPD_NONE, GPIO11|GPIO12);
|
||||||
|
gpio_set(GPIOE, GPIO12);
|
||||||
|
rcc_clock_setup_pll(&this_clock_config);
|
||||||
|
|
||||||
|
rcc_periph_clock_enable(RCC_GPIOA);
|
||||||
|
/*
|
||||||
|
* Vile hack to reenumerate, physically _drag_ d+ low.
|
||||||
|
* do NOT do this if you're board has proper usb pull up control!
|
||||||
|
* (need at least 2.5us to trigger usb disconnect)
|
||||||
|
*/
|
||||||
|
gpio_mode_setup(GPIOA, GPIO_MODE_OUTPUT, GPIO_PUPD_NONE, GPIO12);
|
||||||
|
gpio_clear(GPIOA, GPIO12);
|
||||||
|
for (unsigned int i = 0; i < 800000; i++) {
|
||||||
|
__asm__("nop");
|
||||||
|
}
|
||||||
|
/* now return PA11/PA12 to usb AF */
|
||||||
|
gpio_mode_setup(GPIOA, GPIO_MODE_AF, GPIO_PUPD_NONE, GPIO11|GPIO12);
|
||||||
|
gpio_set_af(GPIOA, GPIO_AF14, GPIO11|GPIO12);
|
||||||
|
|
||||||
|
usbd_device *usbd_dev = gadget0_init(&st_usbfs_v1_usb_driver,
|
||||||
|
"stm32f3-disco");
|
||||||
|
|
||||||
|
ER_DPRINTF("bootup complete\n");
|
||||||
|
gpio_clear(GPIOE, GPIO12);
|
||||||
|
static int i = 0;
|
||||||
|
while (1) {
|
||||||
|
gpio_toggle(GPIOE, GPIO12);
|
||||||
|
gadget0_run(usbd_dev);
|
||||||
|
ER_DPRINTF("loop %d\n", i++);
|
||||||
|
}
|
||||||
|
|
||||||
|
}
|
||||||
|
|
||||||
13
tests/gadget-zero/openocd.stm32f3-disco.cfg
Normal file
13
tests/gadget-zero/openocd.stm32f3-disco.cfg
Normal file
@ -0,0 +1,13 @@
|
|||||||
|
source [find interface/stlink-v2.cfg]
|
||||||
|
set WORKAREASIZE 0x4000
|
||||||
|
source [find target/stm32f3x.cfg]
|
||||||
|
|
||||||
|
# serial of my f3 disco board.
|
||||||
|
hla_serial "S?n\x06gePQ6G%g"
|
||||||
|
|
||||||
|
tpiu config internal swodump.stm32f3-disco.log uart off 72000000
|
||||||
|
|
||||||
|
# Uncomment to reset on connect, for grabbing under WFI et al
|
||||||
|
reset_config srst_only srst_nogate
|
||||||
|
# reset_config srst_only srst_nogate connect_assert_srst
|
||||||
|
|
||||||
Loading…
x
Reference in New Issue
Block a user