Firmware BMP with ENABLE_DEBUG=1 will print WARN and INFO as before.
PC-Hosted BMPwill alway print to stderr. Warn is printed unconditional,
INFO, GDB, TARGET, DONGLE and WIRE will print if their appropriate bit in
cl_debuglevel is set via the -v verbose command line argument.
INFO will go to stdout with -t or -l.
Complements #204.
STLinkV2-1 has F103CB on board! F103C8 on older Stlinks can use upper flash
with hopefully acceptable error rate.
For F103C8 devices, user has to give the force option to dfu-utils.
All source files include general.h first and before anything else.
This inlcludes platform.h and platform_support.h
No header file needs to include to include any of these, but should include
any others needed for it's own declarations.
USB UART seems to work fine at 115.2Kbps or 230.4Kbps, but starts to drop characters
as the data rate goes higher. This commit changes the usbuart ISR to fill a software
FIFO, and adds a low priority timer interrupt to run deferred processing to drain a
FIFO and send USB CDCACM packets, rather than calling the usb send within the UART
ISR.
Tested on native platform, up to 1.5MBps.
- stm32_mem.py has problems with erasing the big pages, but dfu-util works
- serial GDB remote server doesn't work. It neither works for the STM32F107,
so maybe there is a problem with the usbd_f107_driver.
