If an example is in the libopencm3 source directory it will use the
locally built library instead of the system library.
When you copy an example out of the libopencm3 tree it will
automatically detect it and build using the system wide installation.
- The library files are now being built into the lib subdirectory of the
source.
- The linker files for each library are being copied into the lib source
subdirectory.
Motivation: The relative locations of files in the source directory after make
are now the same as after make install now. This makes it easier to
reuse examples with their makefiles outside of the libopencm3
sourcecode directory.
Only add one linker script per eval board, and have the Makefiles use that.
This avoids duplication, and various copy-paste errors and left-overs
which we already have in the tree.
Some of the linker scripts are not really correct, yet. Both, the comments
which say which board, chip, and RAM/ROM sizes are used, as well as the
actual RAM/ROM size definitions are sometimes copy-pasted from other boards
and are thus incorrect. This needs to be fixed.
Since we recently switched from -O0 to -Os, an increase in the loop count
as well as the addition of __asm__("nop") is required (so that the loop
doesn't get optimized/removed).
The real fix is to add a proper timer-based delay function, of course.
Also, fix a bunch of cosmetic issues and typos.
All #includes now explicitly use the "<libopencm3/stm32/rcc.h>" format.
If you want to get rid of the "libopencm3" prefix in your local project you
can add a respective -I entry in your Makefile (not recommended though).
All .ld files and .a libs are installed in $(TOOLCHAIN_DIR)/lib
directly (as before), but are now renamed to avoid potential
conflicts now or in the future. Examples:
libopencm3_lpc13xx.a
libopencm3_lpc13xx.ld
libopencm3_stm32.a
libopencm3_stm32.ld
