Fixes some eeprom sizes, and adds all the -a and -x suffix parts.
Note that the explicit endings must be listed _before_ the base parts,
otherwise the matcher will find the wild card first.
Signed-off-by: Karl Palsson <karlp@etactica.com>
The reference manual is incorrect, the data sheet is correct.
There is 320K of ram (up to address 0x20050000). This has been
tested on the STM32F469I-disco board.
The original submitter of this squished everything into one series, and
has not returned. The code mostly appears good, and review comments were
followed for the most part. The project doesn't really maintain any
testing or board farm for sam3/sam4 parts, so we're going to just trust
our users.
Reviewed-by: Karl Palsson <karlp@tweak.net.au>
sam/4l: IRQ Configuration file (irq.json)
sam/4l: Basic Memory Map.
sam/4l: GPIO Defines.
sam/4l: GPIO Functions
Added everything that needed to compile the library: Makefile, Linker
Script and common includes.
sam/4l: SCIF function to start OSC.
sam/4l: GPIO Enable/Disable and Multiplexing configuration functions.
sam/4l: PLL Clock configuration.
sam/4l: Peripheral clock configuration and basic USART support.
sam: USART Character length configuration.
sam/4l: Generic Clock configuration functions.
sam/4l: Analog to Digital Converter Interface (ADCIFE) basic support.
Until https://github.com/libopencm3/libopencm3/issues/732 has been
fixed, it's not enough to just have it in the README that you need GNU
awk. Explicitly use the "gawk" command name. This exists on (sane)
systems that have gawk as awk, and for systems that use mawk as default,
the gawk name should also exist.
This should make it significantly easier to diagnost the cause of build
problems.
While the NOLOAD variant sometimes worked with some toolchains, the
version in the generator scripts could never work, as neither the
startup code, nor gdb know how to load those sections properly.
Originally added in: eb18cc19cb392a69f8675c42776c644d1003ed89
The original scripts allowed you to place variables in eeprom space for
reading only. However, the last toolchain that generated working code
with this linker script was the gcc-arm-none-eabi-4_9-2014q4 release.
Subsequent releases treat the directives differently, and can lose track
of where variables are. One known symptom is constants getting bad
addresses, so for instance, "printf("asdfad")" will end up passing the
wrong address of the string constant into the eventual _write() call.
This commit removes the problematic directives until a more fully
correct system can be found that more properly follows the linker
script rules.
Thoughts: should this be a "sam0" family rather than samd? (Much like Atmel's
own software package lumps all the cortex-m0+ devices in one family)
This was enough to get a basic blinky working at least.
this is the part on the f072 discovery board. The devices.data file is
expected to be already lowercased, while the user provided DEVICE= variable is
then lowercased.
Added lpc43xx to devices.data
For now all lpc43 chips resolve to their cortex-m4 variant. How m0 should
be handled is to be determined later.
devices.data: add some vf6xx and lm4f support. fix typos
devices.data: added missing lpc13 family group
devices.data: fix lm4f with info from examples
devices.data: add some vf610 info
devices.data: add some entries for examples
As discussed with karlp on irc the devices.data file should not contain
gcc specific command line options.
For that reason the command line options for gcc are now generated from
the variables CPU and FPU by the rules in the mk directory.
This breaks the genlink tests.
genlink: simplified devices.data
devices.data already had the information about the family name.
By using the first field (by the pattern used to match it) as family name information that data doesn't
have to be provided explicitly. The same data is used to generate the
CPPFLAGS, such as -DSTM32F1
The architectures block of the devices.data file was redundant.
genlink-config.mk uses family and subfamily to figure out which libopencm3
variant actually exists.
f7 has -mfpu=fpv5-sp-d16 in the lib makefile, devices.data should have
the same setting.
l0 is a cortex m0+, not a cortex m0, and uses cortex-m0plus in the
library makefile, and should have the same setting in the devices.data
file.
Most changes are noise from doxygen.
Readme udpated to explain newer FP_FLAGS for m7
stm32f7 library is skipped if the toolchain doesn't support it yet.
Correct memory sizes in ld/devices.data for:
* stm32f3[01]3?c from RAM=48K to RAM=40K.
* stm32f303?b from RAM=40K to RAM=32K.
Reviewed-by: Karl Palsson <karlp@tweak.net.au>
These devices have 32kiB RAM and 256kiB flash and are otherwise
register compatible with the f373x8 and f373xc devices.
Signed-off-by: Jeff Epler <jepler@unpythonic.net>
in ARCH, there are all -m flags (will be expanded into ARCH_FLAGS in Makefile)
in DEFS, there are all -D flags (will be expanded into DEFS in Makefile)
in LIB, there are all -l flags (will be expanded into LIBNAME in Makefile)
If no MODE option specified, the generator behaves as in previous version.
This makes possibility for the script to append the definitions to CFLAGS
and LDFLAGS, and with the feature of disabling of -D prependation it will
make possible to generate ARCH_FLAGS generic to each specific chip.
