jackcartersmith/blackmagic
1
0
Fork 0
Code Issues Pull Requests Releases Activity
1,058 Commits 3 Branches 18 Tags
Commit Graph

30 Commits

Author SHA1 Message Date
Josh Robson Chase
02b9d5f1ac Add delay to cortexm_reset 2019-01-07 13:32:17 +13:00
Uwe Bonnes
8d6092b73f cortexm_forced_halt: Only release SRST after "Halt on reset" command. 
This should make life easier if program remaps JTAG/SWD pins so that
with program running, JTAG/SWD access is impossible.
 2019-01-07 13:22:01 +13:00
Uwe Bonnes
3ebf049424 cortexm: Only force halt before probe if idcode is unknown and ROM TABLE unreadable. 2019-01-07 13:22:01 +13:00
Uwe Bonnes
525b90d4e5 cortexm: Only force halt before probe() if probe was forced. 2019-01-07 13:22:01 +13:00
Uwe Bonnes
cde7726b87 cortexm: detach still needs extra cycles. 2019-01-07 13:22:01 +13:00
Uwe Bonnes
f5cf6d4497 adiv5_swdp: Add extra idle cycles with write transactions. 
These extra cycles are needed by some CPU, e.g. STM32L0x1 to cross the SWCLK
/HCLK domains. Revert insufficient #373 also tackling that problem.

Thanks to Thorsten von Eicken for pointing out.
 2018-09-06 17:29:20 +02:00
Rik van der Heijden
f39701c4c8 Move the LPC17xx probe function down since it performs an IAP call which can hang when performed on other devices than a LPC17xx 2018-09-05 17:40:02 +02:00
Uwe Bonnes
f234074099 stm32h7: Start of support. 
Implement probe, memory map, erase, write, uid, crc, parallelism.
 2018-07-27 10:59:54 +02:00
Uwe Bonnes
139707c5c0 cortexm/detach: Add a dummy transaction after cleaning DHCSR. 
This replaces the seemingly superflous swdptap_seq_out() at
the end of adiv5_swdp_low_access() needed to continue after detach.
 2018-07-19 10:57:41 +02:00
Gareth McMullin
b2defad844
Merge pull request #356 from UweBonnes/probe_halted 
Probe halted
 2018-06-21 10:06:56 -07:00
Uwe Bonnes
54f73858f9 Provide a target function to write with given size. 2018-06-16 13:30:08 +02:00
Uwe Bonnes
17b817f37b cortexm: Allow to set timeout to wait for halt. 
This allows to gain access to devices spending long time in WFI without
the need for a reset, at the expense of possible long waiting times.
Using Reset means loosing the device runtime context.
 2018-06-13 14:03:50 +02:00
Uwe Bonnes
9e365a58f7 Cortex-M: Try harder to halt devices in WFI. 
E.g. STM32F7 and L0 need multiple C_DEBUG and C_HALT commands to halt
the device.
 2018-06-13 14:02:43 +02:00
newbrain
ae6f0eadc9 Support for MSP432 TI MCUs (#353) 
Introduces flashing and debugging support for Texas Instruments MSP432
series of MCUs
 2018-06-07 08:34:21 +12:00
Gareth McMullin
cfaa5ea963 Merge branch 'korken89-master' 2018-03-27 13:01:06 +13:00
Gareth McMullin
76bfb4929d Use lowercase register names. 2018-03-27 13:00:39 +13:00
Akila Ravihansa Perera
471ce2547c Added LPC17xx support (#317) 2018-03-25 12:53:30 -07:00
Emil Fresk
1ee6d4503e Update to split 'special' into its sane parts (update from @mubes) 2018-03-24 16:44:59 +01:00
Gareth McMullin
c53a12bfd1 cortexm: Better cache support for Cortex-M7 
- On probe, read CTR for cache presence and minimum line length
- Make D-Cache clean a function
- Clean before memory reads
- Clean and invalidate before memory writes
- Flush all I-Cache before resume
 2017-10-12 09:26:01 +13:00
Nick Downing
0e5b3ab00e Make Cortex M driver write DCCIMVAC (Data cache clean and invalidate by address to the PoC=Point of Coherency) prior to reading or writing each 32 bytes of RAM 2017-10-12 08:41:58 +13:00
Stefan Agner
3c06396c8e Constify strings and constant structs 2017-04-22 13:50:04 -07:00
Gareth McMullin
e4de689a09 cortexm: Check halt reason on stub exit. 2017-04-12 11:37:42 +12:00
Chuck McManis
085c980215 Remove EXTENDED_RESET define 2016-12-04 13:51:27 -08:00
Chuck McManis
a3c2592e44 Review feedback 2016-12-04 13:15:45 -08:00
Chuck McManis
0aef6c6774 SAM4L: Add extended reset to target interface 
This adds a new function to the internal target interface
to allow the target to get control before reset is complete
so that it can do any additional work. On this target there
is a proprietary internal bit that has to be reset in some
cases to allow the core to continue operating.
 2016-12-02 00:08:21 -08:00
Gareth McMullin
9a8cef04e0 Clean up debug format strings. 2016-09-29 21:31:18 -07:00
Gareth McMullin
9aacc18f60 target: Restructure internal break/watch handling. 
cortexa: Implement soft breakpoints.
 2016-07-13 08:31:09 +12:00
Gareth McMullin
9136cf4c98 target: target_halt_wait and target_check_hw_wp replaced with target_halt_poll. 
The new function returns a stop reason which must be translated in gdb server.
In the case of a watchpoint hit, the address is returned by a pointer parameter.
Simplify the extenal interface for set/clear breaki-/watchpoints.
 2016-07-13 08:31:09 +12:00
Gareth McMullin
aeaca988c3 target: Use new target_addr type consistently in external interface. 
Flash routines still use uint32_t internally.
 2016-07-13 08:31:09 +12:00
Gareth McMullin
b494279fe5 Move target files into separate directory. 2016-07-13 08:31:09 +12:00