As the first 4 pages of the bootloader will always keep write protection
once read protection is applied, with the second update of the bootloader
only the higher pages where updated effectivly.
In most cases this resulted in an inaccessible device!
This change has also a practical reason. When flashing and testing the
hardware this change makes it easier to make sure all the LEDs work. Now
when the DFU bootloader is idle it is scanning the LEDs making it easy
to see if one of them has an issue.
In addition to that, the bootloader now indicates when there is data
being flashed using the DFU interface. In cases when one has more than
one device connected and accidently starts flashing a wrong device this
is very useful feature to have.
All source files include general.h first and before anything else.
This inlcludes platform.h and platform_support.h
No header file needs to include to include any of these, but should include
any others needed for it's own declarations.
Hello,
appended 3 patches
- adds a dfu-bootloader appliaction
- uses absolute delays when waiting for pull-up delays on the STLINK
(hopefully fixes issue #30)
Updating the dfu-bootloader by additional application is helpfull for the
STLINK, as for flashing the bootloader by SWDb otherwise jumpers need to be
soldered or external SWD is not possible.
Use like:
- dfu-util -s 0x08002000:leave -D dfu_upgrade.bin
- dfu-util -s 0x08000000:leave -D blackmagic_dfu.bin
- Push reset buttom and reconnect to enter new dfu bootloader
- dfu-util -s 0x08002000:leave -D blackmagic.bin
--
Uwe Bonnes bon@elektron.ikp.physik.tu-darmstadt.de
Institut fuer Kernphysik Schlossgartenstrasse 9 64289 Darmstadt
--------- Tel. 06151 162516 -------- Fax. 06151 164321 ----------
>From fae5022c304a8866f056ea66660ac7ce3809dcf8 Mon Sep 17 00:00:00 2001
From: Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de>
Date: Sun, 20 Oct 2013 15:00:36 +0200
Subject: F1: Prepare to update dfu bootloader via DFU with additional
application.
