This has failing tests, and doesn't implement (yet) the delay routines,
so it won't even compile without disabling that functionality in the
core gadget0 code. However, it passes most tests, and it demonstrates
that the changes made to the setup handling earlier haven't broken USB
on this platform.
The loopback functionality was never implemented, not for regular bulk
endpoints. By adding it, and adding pairs of endpoints, we can easily
catch buffer management problems. These tests currently fail on
st_usbfs devices.
This did require renumbering the endpoints, as dwc_otg_fs only offers
three endpoints in each direction, and they can't be arbitrary numbers,
unlike on st_usbfs.
See https://github.com/libopencm3/libopencm3/pull/880 and related tickets.
D+ is PA12 not PA11. The reason this worked before, is because the line
before made PA12 output, and without setting the GPIO_ODR register
_before_ hand, this meant as soon as it was switched to output, it
received the reset value of GPIO_ODR for PA12, ie, 0. (Effectively
doing a "free" gpio_clear(GPIOA, GPIO12)
Because GPIO11 wasn't configured to be an output, the confusing
gpio_clear(GPIOA, GPIO11) was simply configuring the pullup/down value
of the input, which was still ignored, as it was (out of reset) in input
floating mode.
Reviewed-by: Karl Palsson <karlp@tweak.net.au>
Attempt to be more brutal by delaying more often, instead of always
promptly servicing the usb stack.
This is implemented via using timer6 to do a known number of
microseconds busy delay, and so only works on platforms that have
reached at least core timer functionality, and provide the
rcc_apb1_frequency variable.
NOTE! This will _fail_ on devices using the st_usbfs drivers at present,
but the code _should_ work, and the tests land to verify that the
library fix, fixes the problem. (see subsequent commit)
Instead of having committed files containing a single developer's serials, use
optional includes to include a local config file for each board.
If you have only a single board connected, simply:
$ make -f Makefile.<board> clean all flash
If you have multiple boards connected, make sure to fill in the appropriate
hla_serial in your openocd.<board>.local.cfg file, and then run the same
commands.
The F429i board has the user USB OTG port connected to the HS capable
OTG core, rather than the FS OTG core. It is still only operating in FS
mode, as you need a ULPI phy to use HS mode.
Control transfers can transfer less than was requested by the host in the
wLength field. if this short transfer is a multiple of the endpoint's packet
size, a zero length packet must be sent.
Adds tests for a range of control transfer IN requests, and properly supports
this in the core. Based heavily on work by Kuldeep Dhaka.
See https://github.com/libopencm3/libopencm3/pull/505
and https://github.com/libopencm3/libopencm3/pull/194 for original discussion.
Tested with stm32f4, stm32f103 and stm32l053.
Based on previous work, add a new driver for the v2 usb peripheral found on
stm32f0 and l0 devices.
Correspondingly, add a usb gadget zero test suite for the f0. L0 device level
code isn't yet ready, but will add the test case when it moves in.
Work by Frantisek Burian, Kuldeep
Singh Dhaka, Robin Kreis, fenugrec and zyp on irc, and all those forgotten.
The breaking changes here changes in header location, and changes in driver
name passed down to the usb stack.
Changes affect: stm32f102/f103, stm32l1, and some f3 parts
* instead of the confusingly generic "usb" use the name "st_usbfs" for the USB
Full speed peripheral ST provides in a variety of their stm32 products.
Include directives should change as:
#include <libopencm3/stm32/usb.h> => <libopencm3/stm32/st_usbfs.h>
* instead of the confusingly specific "f103" name for the driver, use
"st_usbfs_v1" [BREAKING_CHANGE]
Instead of:
usbd_init(&stm32f103_usb_driver, .....) ==>
usbd_init(&st_usbfs_v1_usb_driver, .....) ==>
The purpose of these changes is to reduce some confusion around naming, but
primarily to prepare for the "v2" peripheral available on stm32f0/l0 and some
f3 devices.
Work by Frantisek Burian, Kuldeep Singh Dhaka, Robin Kreis, fenugrec and zyp
on irc, and all those forgotten.
As with F103 generic, there's no readily available L1 board with USB device
A custom LED is used to track boot process, but otherwise this should be
portable to any L1 board, except for the openocd configuration file.
Tests pass straight away, which is good, as it uses the existing f103 usb
driver.
There's no F1 discovery style board with usb device, so this is for a "generic"
device. The USB portion should be safe, but there's a led used for bootup that
is board specific, and of course the clock source is board specific.
Related, the openocd config file is rather custom to my own setup, but shows
what you need to customize for your test environment.
Further, as the F1 usb core doesn't include support for soft disconnect, use
the very hacky method of dragging the pin low to force reenumeration on reset.
Very very useful for development purposes!
