dragonmux
c5dbf851f6
hosted/bmp_libusb: Formatting cleanup
2022-04-16 18:22:14 -04:00
mean
9007c40954
revert temp patch on platform.h
2022-03-22 10:10:33 -04:00
mean
82c41cb739
add putpacket2 to send two sub messages merged as one
2022-03-22 10:10:33 -04:00
Mike Ditto
48c6db1963
Remove duplicate definition of USBUSART_DMA_TX_ISR
2022-03-22 10:02:52 -04:00
Piotr Esden-Tempski
e82d4f2eda
native: Fixes an hw version issue with some older BMP.
...
The BMP with hardware version 4 and newer, use option bytes instead of
physical GPIO to encode the hardware version. In some older BMP there is
a chance that the user option byte is set to 255 (0x00FF pattern). This
can throw off the hardware version detection routine.
2022-03-15 23:45:32 -07:00
Piotr Esden-Tempski
bcba3ee4a9
native: Fixed hw6 USBUSART support.
2022-03-15 23:45:32 -07:00
Piotr Esden-Tempski
06f24d3269
native: Added blocks to the ISR templates.
2022-03-15 23:45:32 -07:00
Piotr Esden-Tempski
bb761e4b38
native: Initial addition of hw 6 support.
2022-03-15 23:45:32 -07:00
Piotr Esden-Tempski
2d63021344
native: Improved pinout legend comment block.
2022-03-15 23:45:32 -07:00
Piotr Esden-Tempski
e7982d594e
native: Added HW5 AUX interface definitions.
2022-03-15 23:45:32 -07:00
Piotr Esden-Tempski
655014ac9c
native: hw rev 5 has the usb vbus sense pin on PA15.
...
We had to move the pin to free up the SPI SCLK pin.
2022-03-15 23:45:32 -07:00
Piotr Esden-Tempski
9ffa923bc1
native: Update hwversion detection for hw rev 4 and newer.
...
The hw rev 4 and 5 both have the version stored in the Data1 user option
byte. This frees up the hw rev strapping pins for other uses, ie swtrace
decoding using USART1 RX, and additional peripherals on the SPI bus,
like bulk flash storage and displays.
2022-03-15 23:45:32 -07:00
dragonmux
361dc9c234
Revert "adiv5_swdp_scan: If SWD scan fails, try a JTAG scan."
...
This reverts commit 3df692ecb247fdc7c62f3c3dc622030ad12817e6.
2022-03-14 21:37:44 -07:00
dragonmux
54f577a970
hosted/dap: Partial revert of 5c8e277, taking into account that division may not be available on platforms 'hosted' might see itself built
2022-03-14 21:37:44 -07:00
dragonmux
d1c9d94174
jtag_scan: Remove the now redundant IDCode parameter from the handlers
2022-03-14 21:37:44 -07:00
dragonmux
7d2afcff06
Revert "jtag: Make jtag_devs argument to jtag_handler."
...
This reverts commit 6308506276d09cde14be2985c0c5a59adc0addc6.
2022-03-14 21:37:44 -07:00
dragonmux
02d9a1d3cf
Revert "jtag_scan: Rework chain detection"
...
This reverts commit 2d4a50313596081a64bd1397017985641fd8cad0.
2022-03-14 21:37:44 -07:00
Nicolas Schodet
ca9d8cd0ae
scripts: fix dfu-convert.py for Python 3 and drop Python 2 support
2022-02-13 15:31:12 -08:00
Paul Mulders
ed156076a2
swlink README: correct SWO/RX2 header location for blue pill
2022-01-30 11:48:12 +01:00
Uwe Bonnes
6a9b2b8224
hosted/ftdi: Fix bad length calculation in MPSSE case of swdptap_seq_in()
2022-01-25 11:40:55 -05:00
Uwe Bonnes
266fe17461
bmp_libusb: Restrict scope of variable
2022-01-25 11:40:55 -05:00
Uwe Bonnes
e3804183f7
bmp_libusb: Fix crash with FTDI devices as outdated variable was used.
...
Triggered by 7b1eb6e6e3.
2022-01-25 11:40:55 -05:00
Uwe Bonnes
b1ed55a18f
hosted/firmware/jtag: Fix unhandled exception introduced with da15cc3cb75cc2a9f.
...
Write in endianess independant way.
2022-01-22 23:46:52 -08:00
Uwe Bonnes
3f28e728e9
cdcacm: Lower usage of magic numbers.
2021-12-18 21:44:18 -08:00
Uwe Bonnes
98e3858f7c
bmp_libusb: Exclude Wireless class too.
2021-11-23 20:54:59 +01:00
Koen De Vleeschauwer
bb4151377f
type of ‘assert’ defaults to ‘int’
2021-11-22 19:51:10 +01:00
fabalthazar
b4ac52d1f5
Hosted monitor command allowed as preliminary command
2021-11-15 21:20:38 +01:00
fabalthazar
71b67beb98
Fix: assert flashing succeeded or failed (hosted) once the last buffer has been written
2021-11-15 21:19:08 +01:00
Uwe Bonnes
1d0e45bdbb
cmsis_dap: Transfersize of block commands needs to cope with word.
...
Checkme: Dragonprobe bulk hangs on transfers with 15 words.
2021-11-02 18:17:12 +01:00
Uwe Bonnes
8970160f1d
cmsis_dap: Timeout and start of error handling for bulk transfers.
2021-11-02 18:17:12 +01:00
Uwe Bonnes
2bc2db1140
cmsis_da: Add timeout to bulk commands.
2021-11-02 18:17:12 +01:00
Uwe Bonnes
a4caec29b9
dap_swdptap_seq_out: Write only needed data
...
Dragonprobe (origin/cmsisdap-fixes, 211031) hanged on additional byes in the
SWJ_Sequence request.
2021-11-02 18:17:03 +01:00
Uwe Bonnes
07b4e5726e
CMSIS-DAP: Run time detect DAP_SWD_SEQUENCE
...
Some dongles in the making like orbtrace may not yet support.
2021-10-31 12:55:41 +01:00
Uwe Bonnes
88e44d1c12
cmsis: use exception in wait_word().
2021-10-31 12:55:41 +01:00
Uwe Bonnes
a1d4649795
SWD: Use dp_low_write to allow multidrop scan.
2021-10-31 12:55:41 +01:00
Uwe Bonnes
4f36c1ddf8
Remove dp_low_read() and use exception protected dp_read()
2021-10-31 12:55:41 +01:00
Uwe Bonnes
f9d343af3e
cmsis: AP reads are posted. Read from RDBUFF.
2021-10-31 12:55:41 +01:00
Uwe Bonnes
d4ae308f9f
cmsis: implement srst_set_val()
2021-10-31 12:55:41 +01:00
Uwe Bonnes
166eb3ee3e
cmsis_dap: Always transfer 65 bytes with hid_read|write()
...
CMSIS-DAP Dragonprobe works on some devices. E.g. it does not work
on NUCLEO-F103
2021-10-31 12:55:41 +01:00
Uwe Bonnes
b343ebe06f
cmsis-dap/linux: Link against libhidapi-hidraw
...
libhidapi-libusb detaches a kernel module but does not reattach again.
This may wrack interaction with other programs using hidapi.
2021-10-31 12:55:41 +01:00
Uwe Bonnes
761e0230d4
cmsis-dap: Print messages when transfers fail.
...
Expect signal integrity errors when using jumper cables. Often probes switch
the SWJ GPIO with highest speed, resulting in possible reflections. Additional
ground wires may help. If there is isolation between probe and targets,
additional ground wires are a must or ground shift will wrack the transfer!
2021-10-31 12:55:41 +01:00
Uwe Bonnes
39fbffd3d2
stlinkv2: Fix low access to AP registers.
2021-10-31 12:55:41 +01:00
Uwe Bonnes
c13778139f
adiv5/hosted: Export the BMP_TYPE in DP.
2021-10-31 12:55:41 +01:00
Uwe Bonnes
485105221e
dap: Always work on a copy of the buffer when calling dbg_dap_cmd() in a loop
...
A better solution would use seperate buffers for dbg_dap_cmd. But as WAIT is
already handled in DAP, cahnces are low that loop re-entry is needed.
2021-10-31 12:55:41 +01:00
Uwe Bonnes
397fbd5749
cmsis: Only cmsis internal use must differentiate between HID and Bulk access
...
Missing DAP_SWD_SEQUENCE may eventually need a distinction visible from
outside later.
2021-10-31 12:55:41 +01:00
Uwe Bonnes
7b1eb6e6e3
bmp_libusb: reset type on every device.
2021-10-31 12:53:47 +01:00
Uwe Bonnes
80064c18a9
bmp_libusb: Fix CMSIS-DAP related memory leak.
2021-10-31 11:13:34 +01:00
Uwe Bonnes
c4b6b42dcf
stlinkv2: Read targetid on DPv2 devices.
2021-10-31 11:13:34 +01:00
Uwe Bonnes
e7e1bfdb53
mpsse: Fix using 60 MHz clock on fast devices.
2021-10-30 13:55:57 +02:00
Uwe Bonnes
99a5fdb6f8
bmp_remote: Better error propagation.
...
Negative values from platform_buffer_read are errors too!
2021-10-30 13:55:57 +02:00