Problem: On some boards flashing hanged.
Cause: Releasing SRST caused a slow rise of nRST and flashing
started while the target still was in reset.
Attention: platform_delay(ms) only resolved 0.1 s.
Nucleo-P boards have SRST unconnected to target nRST by default.
Complements #204.
STLinkV2-1 has F103CB on board! F103C8 on older Stlinks can use upper flash
with hopefully acceptable error rate.
For F103C8 devices, user has to give the force option to dfu-utils.
I was stuck trying to debug the issue why my probe would not find any attached targets. This is because I was doing the pin mapping as per the comments, and not the actual code. There is a mismatch!
This PR updates the comment to reflect the values set in code. :)
- Remove connect_assert_srst global.
- Attach functions always release reset.
- Platforms provide a method to poll the reset pin.
- Reset on scan is all internal to command.c
- Reset is released on a failed scan. Fixes#111
This change has also a practical reason. When flashing and testing the
hardware this change makes it easier to make sure all the LEDs work. Now
when the DFU bootloader is idle it is scanning the LEDs making it easy
to see if one of them has an issue.
In addition to that, the bootloader now indicates when there is data
being flashed using the DFU interface. In cases when one has more than
one device connected and accidently starts flashing a wrong device this
is very useful feature to have.
All source files include general.h first and before anything else.
This inlcludes platform.h and platform_support.h
No header file needs to include to include any of these, but should include
any others needed for it's own declarations.
Hello,
appended 3 patches
- adds a dfu-bootloader appliaction
- uses absolute delays when waiting for pull-up delays on the STLINK
(hopefully fixes issue #30)
Updating the dfu-bootloader by additional application is helpfull for the
STLINK, as for flashing the bootloader by SWDb otherwise jumpers need to be
soldered or external SWD is not possible.
Use like:
- dfu-util -s 0x08002000:leave -D dfu_upgrade.bin
- dfu-util -s 0x08000000:leave -D blackmagic_dfu.bin
- Push reset buttom and reconnect to enter new dfu bootloader
- dfu-util -s 0x08002000:leave -D blackmagic.bin
--
Uwe Bonnes bon@elektron.ikp.physik.tu-darmstadt.de
Institut fuer Kernphysik Schlossgartenstrasse 9 64289 Darmstadt
--------- Tel. 06151 162516 -------- Fax. 06151 164321 ----------
>From fae5022c304a8866f056ea66660ac7ce3809dcf8 Mon Sep 17 00:00:00 2001
From: Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de>
Date: Sun, 20 Oct 2013 15:00:36 +0200
Subject: F1: Prepare to update dfu bootloader via DFU with additional
application.
