636bcee355
Hopefully no old bootloaders are around. If otherwise, revert to last commit before this and update the DFU bootloader.
107 lines
2.8 KiB
C
107 lines
2.8 KiB
C
/*
|
|
* This file is part of the Black Magic Debug project.
|
|
*
|
|
* Copyright (C) 2013 Gareth McMullin <gareth@blacksphere.co.nz>
|
|
*
|
|
* This program is free software: you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation, either version 3 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
*/
|
|
|
|
#include <string.h>
|
|
#include <libopencm3/cm3/systick.h>
|
|
#include <libopencm3/stm32/rcc.h>
|
|
#include <libopencm3/stm32/gpio.h>
|
|
#include <libopencm3/cm3/scb.h>
|
|
|
|
#include "usbdfu.h"
|
|
#include "platform.h"
|
|
|
|
uint32_t app_address = 0x08002000;
|
|
uint32_t rev;
|
|
|
|
void dfu_detach(void)
|
|
{
|
|
/* Disconnect USB cable by resetting USB Device
|
|
and pulling USB_DP low*/
|
|
rcc_periph_reset_pulse(RST_USB);
|
|
rcc_periph_clock_enable(RCC_USB);
|
|
rcc_periph_clock_enable(RCC_GPIOA);
|
|
gpio_clear(GPIOA, GPIO12);
|
|
gpio_set_mode(GPIOA, GPIO_MODE_OUTPUT_2_MHZ,
|
|
GPIO_CNF_OUTPUT_OPENDRAIN, GPIO12);
|
|
scb_reset_system();
|
|
}
|
|
|
|
int main(void)
|
|
{
|
|
/* Check the force bootloader pin*/
|
|
bool normal_boot = 0;
|
|
rev = detect_rev();
|
|
switch (rev) {
|
|
case 0:
|
|
/* For Stlink on STM8S check that CN7 PIN 4 RESET# is
|
|
* forced to GND, Jumper CN7 PIN3/4 is plugged).
|
|
* Switch PB5 high. Read PB6 low means jumper plugged.
|
|
*/
|
|
gpio_set_mode(GPIOB, GPIO_MODE_INPUT,
|
|
GPIO_CNF_INPUT_PULL_UPDOWN, GPIO6);
|
|
gpio_set(GPIOB, GPIO6);
|
|
gpio_set_mode(GPIOB, GPIO_MODE_OUTPUT_2_MHZ,
|
|
GPIO_CNF_OUTPUT_PUSHPULL, GPIO5);
|
|
while (gpio_get(GPIOB, GPIO5))
|
|
gpio_clear(GPIOB, GPIO5);
|
|
while (!gpio_get(GPIOB, GPIO5))
|
|
gpio_set(GPIOB, GPIO5);
|
|
normal_boot = (gpio_get(GPIOB, GPIO6));
|
|
break;
|
|
case 1:
|
|
/* Boot0/1 pins have 100k between Jumper and MCU
|
|
* and are jumperd to low by default.
|
|
* If we read PB2 high, force bootloader entry.*/
|
|
gpio_set_mode(GPIOB, GPIO_MODE_INPUT,
|
|
GPIO_CNF_INPUT_FLOAT, GPIO2);
|
|
normal_boot = !(gpio_get(GPIOB, GPIO2));
|
|
}
|
|
if(((GPIOA_CRL & 0x40) == 0x40) && normal_boot)
|
|
dfu_jump_app_if_valid();
|
|
|
|
dfu_protect(false);
|
|
|
|
rcc_clock_setup_in_hse_8mhz_out_72mhz();
|
|
systick_set_clocksource(STK_CSR_CLKSOURCE_AHB_DIV8);
|
|
systick_set_reload(900000);
|
|
|
|
systick_interrupt_enable();
|
|
systick_counter_enable();
|
|
|
|
dfu_init(&st_usbfs_v1_usb_driver);
|
|
|
|
dfu_main();
|
|
}
|
|
|
|
void dfu_event(void)
|
|
{
|
|
}
|
|
|
|
void sys_tick_handler(void)
|
|
{
|
|
switch (rev) {
|
|
case 0:
|
|
gpio_toggle(GPIOA, GPIO8);
|
|
break;
|
|
case 1:
|
|
gpio_toggle(GPIOC, GPIO13);
|
|
break;
|
|
}
|
|
}
|