77 lines
2.0 KiB
C
77 lines
2.0 KiB
C
/*
|
|
* This file is part of the libopencm3 project.
|
|
*
|
|
* Copyright (C) 2009 Uwe Hermann <uwe@hermann-uwe.de>,
|
|
* Copyright (C) 2010 Piotr Esden-Tempski <piotr@esden.net>
|
|
* Copyright (C) 2011 Stephen Caudle <scaudle@doceme.com>
|
|
*
|
|
* This library is free software: you can redistribute it and/or modify
|
|
* it under the terms of the GNU Lesser General Public License as published by
|
|
* the Free Software Foundation, either version 3 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This library is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU Lesser General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU Lesser General Public License
|
|
* along with this library. If not, see <http://www.gnu.org/licenses/>.
|
|
*/
|
|
|
|
#include <libopencm3/stm32/f4/rcc.h>
|
|
#include <libopencm3/stm32/f4/gpio.h>
|
|
|
|
u16 exti_line_state;
|
|
|
|
/* Set STM32 to 168 MHz. */
|
|
void clock_setup(void)
|
|
{
|
|
rcc_clock_setup_hse_3v3(&hse_8mhz_3v3[CLOCK_3V3_168MHZ]);
|
|
}
|
|
|
|
void gpio_setup(void)
|
|
{
|
|
/* Enable GPIOD clock. */
|
|
rcc_peripheral_enable_clock(&RCC_AHB1ENR, RCC_AHB1ENR_IOPDEN);
|
|
|
|
/* Set GPIO12 (in GPIO port D) to 'output push-pull'. */
|
|
gpio_mode_setup(GPIOD, GPIO_MODE_OUTPUT,
|
|
GPIO_PUPD_NONE, GPIO12 | GPIO13 | GPIO14 | GPIO15);
|
|
}
|
|
|
|
void button_setup(void)
|
|
{
|
|
/* Enable GPIOA clock. */
|
|
rcc_peripheral_enable_clock(&RCC_AHB1ENR, RCC_AHB1ENR_IOPAEN);
|
|
|
|
/* Set GPIO0 (in GPIO port A) to 'input open-drain'. */
|
|
gpio_mode_setup(GPIOA, GPIO_MODE_INPUT, GPIO_PUPD_NONE, GPIO0);
|
|
}
|
|
|
|
int main(void)
|
|
{
|
|
int i;
|
|
|
|
clock_setup();
|
|
button_setup();
|
|
gpio_setup();
|
|
|
|
/* Blink the LED (PD12) on the board. */
|
|
while (1) {
|
|
gpio_toggle(GPIOD, GPIO12);
|
|
|
|
/* Upon button press, blink more slowly. */
|
|
exti_line_state = GPIOA_IDR;
|
|
if ((exti_line_state & (1 << 0)) != 0) {
|
|
for (i = 0; i < 3000000; i++) /* Wait a bit. */
|
|
__asm__("nop");
|
|
}
|
|
|
|
for (i = 0; i < 3000000; i++) /* Wait a bit. */
|
|
__asm__("nop");
|
|
}
|
|
|
|
return 0;
|
|
}
|