49 lines
1.2 KiB
Plaintext
49 lines
1.2 KiB
Plaintext
------------------------------------------------------------------------------
|
|
README
|
|
------------------------------------------------------------------------------
|
|
|
|
This is the smallest-possible example program using libopenstm32.
|
|
|
|
It's intended for the ST STM32-based Olimex STM32-H103 eval board (see
|
|
http://olimex.com/dev/stm32-h103.html for details). It should blink
|
|
the LED on the board.
|
|
|
|
|
|
Building
|
|
--------
|
|
|
|
$ make
|
|
|
|
Running 'make' on the top-level libopenstm32 directory will automatically
|
|
also build this example. Or you can build the library "manually" and
|
|
then run 'make' in this directory.
|
|
|
|
You may want to override the toolchain (e.g., arm-elf or arm-none-eabi):
|
|
|
|
$ PREFIX=arm-none-eabi make
|
|
|
|
For a more verbose build you can use
|
|
|
|
$ make V=1
|
|
|
|
|
|
Flashing
|
|
--------
|
|
|
|
You can flash the generated code on the STM32-H103 board using OpenOCD:
|
|
|
|
$ make flash
|
|
|
|
Or you can do the same manually via:
|
|
|
|
$ openocd -f interface/jtagkey-tiny.cfg -f board/olimex_stm32_h103.cfg
|
|
$ telnet localhost 4444
|
|
> init
|
|
> reset halt
|
|
> flash write_image erase fancyblink.bin 0x08000000
|
|
> reset
|
|
|
|
Replace the "jtagkey-tiny.cfg" with whatever JTAG device you are using, and/or
|
|
replace "olimex_stm32_h103.cfg" with your respective board config file.
|
|
|