Guillaume Revaillot 553c876fa5 stm32: exti: define AFIO/SYSCFG_EXTICR_FIELDSIZE for all chip. ...

While on all current chips, exticr gpio port mux selection is coded on 4 bits,
stm32g0 EXTI_EXTICR register uses 8 bits.  Align all exti header to reference
that value (was previously defined for f0 as SYCFG_EXTICR_SKIP)

2019-01-31 09:57:43 +00:00

..

adc.h

stm32l0: adc: add sample time definitions

2018-04-28 21:12:27 +00:00

dma.h

Add DMA support to STM32L0

2018-04-29 19:22:13 +00:00

doc-stm32l0.h

doc: use common naming for peripheral apis

2018-07-03 22:23:00 +00:00

exti.h

stm32: exti: move register definition of all current stm32 devices to common_v1

2019-01-18 18:33:55 +01:00

flash.h

stm32: flash: pull up prefetch to _all

2018-07-29 20:31:17 +00:00

gpio.h

Surround all macro parameters with ()

2015-10-14 22:15:15 +00:00

i2c.h

stm32: l0/l4: add i2c support

2017-03-30 21:48:07 +00:00

irq.json

stm32l0: add all new IRQs from later families

2018-03-08 09:52:21 +00:00

iwdg.h

stm32l0: enable iwdg

2018-03-28 13:06:57 +00:00

memorymap.h

stm32: support i2c3 properly

2018-08-17 00:15:01 +00:00

pwr.h

stm32: renamed pwr_common_all to pwr_common_v1, and pwr_common_l01 to pwr_common_v2

2017-03-30 21:48:08 +00:00

rcc.h

stm32l0:rcc: add rcc_set_pll_source() as per L1

2018-03-02 22:42:05 +00:00

rng.h

stm32:rng: add common v1 to l0,l4,f7

2017-03-30 21:48:07 +00:00

rtc.h

stm32l0: include rtc module

2018-07-03 22:23:00 +00:00

spi.h

stm32: rework spi, based on PR #740 and #742.

2018-04-28 21:12:27 +00:00

st_usbfs.h

stm32l0: Add USB support via st_usbfs driver.

2015-10-06 00:54:17 +00:00

syscfg.h

stm32: exti: define AFIO/SYSCFG_EXTICR_FIELDSIZE for all chip.

2019-01-31 09:57:43 +00:00

timer.h

Surround all macro parameters with ()

2015-10-15 01:03:18 +00:00

usart.h

stm32:l0: enable usart peripheral

2017-10-25 23:26:52 +00:00