Uwe Bonnes 761e0230d4 cmsis-dap: Print messages when transfers fail. ...

Expect signal integrity errors when using jumper cables. Often probes switch
the SWJ GPIO with highest speed, resulting in possible reflections. Additional
ground wires may help. If there is isolation between probe and targets,
additional ground wires are a must or ground shift will wrack the transfer!

2021-10-31 12:55:41 +01:00

..

include

Test voltage on VREF before enabling target power (mon tpwr), to avoid potential power conflict.

2021-09-22 20:45:18 +02:00

platforms

cmsis-dap: Print messages when transfers fail.

2021-10-31 12:55:41 +01:00

target

cmsis-dap: Print messages when transfers fail.

2021-10-31 12:55:41 +01:00

command.c

Test voltage on VREF before enabling target power (mon tpwr), to avoid potential power conflict.

2021-09-22 20:45:18 +02:00

crc32.c

crc32: Abort generic_crc32 with error from target_mem_read

2021-09-07 10:57:17 +02:00

exception.c

Classify debug messages

2020-06-05 14:59:30 +02:00

gdb_hostio.c

target: Use size_t instead of unsigned in syscall interface.

2016-07-13 08:31:09 +12:00

gdb_hostio.h

target: Use size_t instead of unsigned in syscall interface.

2016-07-13 08:31:09 +12:00

gdb_main.c

Better reporting when monitor command fails.

2021-09-22 21:41:43 +02:00

gdb_packet.c

Escape '*' in responses of the Remote Serial Protocol, to avoid that it is interpreted as the start of an RLE sequence

2021-08-31 15:44:17 +02:00

hex_utils.c

Fix pointer sign warnings and remove -Wno-pointer-sign.

2015-03-13 20:35:39 -07:00

main.c

remote.c: Compile only relevant functions.

2020-06-05 14:59:30 +02:00

Makefile

jtag_scan: Rework chain detection

2021-08-15 16:43:29 +02:00

morse.c

Turn error LED off after successful attach to target (error LED blinks on 'target lost').

2021-08-13 16:10:37 +02:00

remote.c

Test voltage on VREF before enabling target power (mon tpwr), to avoid potential power conflict.

2021-09-22 20:45:18 +02:00

remote.h

remote: Packets may be larger than 256 bytes.

2021-09-22 15:16:20 +02:00

timing.c

timeout: Make sure we wait at least the period requested (#900, #902)

2021-07-27 10:59:03 +02:00