103 lines
2.7 KiB
C
103 lines
2.7 KiB
C
/*
|
|
* This file is part of the libopencm3 project.
|
|
*
|
|
* Copyright (C) 2012 Benjamin Vernoux <titanmkd@gmail.com>
|
|
*
|
|
* This library is free software: you can redistribute it and/or modify
|
|
* it under the terms of the GNU Lesser General Public License as published by
|
|
* the Free Software Foundation, either version 3 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This library is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU Lesser General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU Lesser General Public License
|
|
* along with this library. If not, see <http://www.gnu.org/licenses/>.
|
|
*/
|
|
|
|
#include <libopencm3/lpc43xx/gpio.h>
|
|
#include <libopencm3/lpc43xx/scu.h>
|
|
#include <libopencm3/lpc43xx/cgu.h>
|
|
#include <libopencm3/lpc43xx/ssp.h>
|
|
|
|
#include "../jellybean_conf.h"
|
|
|
|
static void gpio_setup(void)
|
|
{
|
|
/* Configure all GPIO as Input (safe state) */
|
|
GPIO0_DIR = 0;
|
|
GPIO1_DIR = 0;
|
|
GPIO2_DIR = 0;
|
|
GPIO3_DIR = 0;
|
|
GPIO4_DIR = 0;
|
|
GPIO5_DIR = 0;
|
|
GPIO6_DIR = 0;
|
|
GPIO7_DIR = 0;
|
|
|
|
/* Configure SCU Pin Mux as GPIO */
|
|
scu_pinmux(SCU_PINMUX_LED1, SCU_GPIO_FAST);
|
|
scu_pinmux(SCU_PINMUX_LED2, SCU_GPIO_FAST);
|
|
scu_pinmux(SCU_PINMUX_LED3, SCU_GPIO_FAST);
|
|
|
|
scu_pinmux(SCU_PINMUX_EN1V8, SCU_GPIO_FAST);
|
|
|
|
scu_pinmux(SCU_PINMUX_BOOT0, SCU_GPIO_FAST);
|
|
scu_pinmux(SCU_PINMUX_BOOT1, SCU_GPIO_FAST);
|
|
scu_pinmux(SCU_PINMUX_BOOT2, SCU_GPIO_FAST);
|
|
scu_pinmux(SCU_PINMUX_BOOT3, SCU_GPIO_FAST);
|
|
|
|
/* Configure SSP1 Peripheral (to be moved later in SSP driver) */
|
|
scu_pinmux(SCU_SSP1_MISO, (SCU_SSP_IO | SCU_CONF_FUNCTION5));
|
|
scu_pinmux(SCU_SSP1_MOSI, (SCU_SSP_IO | SCU_CONF_FUNCTION5));
|
|
scu_pinmux(SCU_SSP1_SCK, (SCU_SSP_IO | SCU_CONF_FUNCTION1));
|
|
scu_pinmux(SCU_SSP1_SSEL, (SCU_SSP_IO | SCU_CONF_FUNCTION1));
|
|
|
|
/* Configure GPIO as Output */
|
|
GPIO2_DIR |= (PIN_LED1|PIN_LED2|PIN_LED3); /* Configure GPIO2[1/2/8] (P4_1/2 P6_12) as output. */
|
|
GPIO3_DIR |= PIN_EN1V8; /* GPIO3[6] on P6_10 as output. */
|
|
}
|
|
|
|
int main(void)
|
|
{
|
|
int i;
|
|
u8 ssp_val;
|
|
u8 serial_clock_rate;
|
|
u8 clock_prescale_rate;
|
|
|
|
gpio_setup();
|
|
|
|
/* Freq About 1.12MHz => Freq = PCLK / (CPSDVSR * [SCR+1]) with PCLK=PLL1=288MHz */
|
|
clock_prescale_rate = 2;
|
|
serial_clock_rate = 128;
|
|
|
|
ssp_init(SSP1_NUM,
|
|
SSP_DATA_8BITS,
|
|
SSP_FRAME_SPI,
|
|
SSP_CPOL_0_CPHA_0,
|
|
serial_clock_rate,
|
|
clock_prescale_rate,
|
|
SSP_MODE_NORMAL,
|
|
SSP_MASTER,
|
|
SSP_SLAVE_OUT_ENABLE);
|
|
|
|
ssp_val = 0x0;
|
|
|
|
while (1) {
|
|
|
|
ssp_write(SSP1_NUM, (u16)ssp_val);
|
|
|
|
gpio_set(GPIO2, GPIOPIN1); /* LED on */
|
|
|
|
for (i = 0; i < 1000; i++) /* Wait a bit. */
|
|
__asm__("nop");
|
|
|
|
gpio_clear(GPIO2, GPIOPIN1); /* LED off */
|
|
|
|
ssp_val++;
|
|
}
|
|
|
|
return 0;
|
|
}
|