44 lines
1.0 KiB
Plaintext
44 lines
1.0 KiB
Plaintext
------------------------------------------------------------------------------
|
|
README
|
|
------------------------------------------------------------------------------
|
|
|
|
This example program blinks a LED on PortB Pin 6. 1 second on / 1 second off.
|
|
Blinking is made only with timer interrupt from TIM2 timer.
|
|
|
|
Building
|
|
--------
|
|
|
|
$ make
|
|
|
|
Running 'make' on the top-level libopenstm32 directory will automatically
|
|
also build this example. Or you can build the library "manually" and
|
|
then run 'make' in this directory.
|
|
|
|
You may want to override the toolchain (e.g., arm-elf or arm-none-eabi):
|
|
|
|
$ PREFIX=arm-none-eabi make
|
|
|
|
For a more verbose build you can use
|
|
|
|
$ make V=1
|
|
|
|
|
|
Flashing
|
|
--------
|
|
|
|
You can flash the generated code using OpenOCD:
|
|
|
|
$ make flash
|
|
|
|
Or you can do the same manually via:
|
|
|
|
$ openocd -f interface/jtagkey-tiny.cfg -f target/stm32.cfg
|
|
$ telnet localhost 4444
|
|
> reset halt
|
|
> flash write_image erase timer.hex
|
|
> reset
|
|
|
|
Replace the "jtagkey-tiny.cfg" with whatever JTAG device you are using, and/or
|
|
replace "stm.cfg" with your respective config file.
|
|
|