89 lines
2.4 KiB
C
89 lines
2.4 KiB
C
/*
|
|
* This file is part of the libopencm3 project.
|
|
*
|
|
* Copyright (C) 2012 chrysn <chrysn@fsfe.org>
|
|
*
|
|
* This program is free software: you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation, either version 3 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
*/
|
|
|
|
/** @file Common definitions used by all lightswitch implementations */
|
|
|
|
#include <libopencm3/efm32/tinygecko/gpio.h>
|
|
#include <libopencm3/efm32/tinygecko/cmu.h>
|
|
|
|
/** The User LED is connected to PD7 to the plus side of the LED according to
|
|
* t0011_efm32_tiny_gecko_stk_user_manual.pdf figures 16.2 and 16.3 (called
|
|
* UIF_LED0)
|
|
*/
|
|
#define LED_PORT GPIO_PD
|
|
#define LED_PIN GPIO7
|
|
|
|
#define BUTTON0_PORT GPIO_PD
|
|
#define BUTTON0_PORT_EXTIPSEL GPIO_EXTIPSEL_PORTD
|
|
#define BUTTON0_PIN_NUMBER 8
|
|
#define BUTTON0_PIN GPIO8
|
|
#define BUTTON1_PORT GPIO_PB
|
|
#define BUTTON1_PORT_EXTIPSEL GPIO_EXTIPSEL_PORTB
|
|
#define BUTTON1_PIN_NUMBER 11
|
|
#define BUTTON1_PIN GPIO11
|
|
|
|
void gpio_setup(void);
|
|
void led_on(void);
|
|
void led_off(void);
|
|
|
|
bool pb0_get(void);
|
|
bool pb1_get(void);
|
|
|
|
/**
|
|
* Enable GPIO, and set up port D7 as an output pin and D8 and B11 as input.
|
|
*/
|
|
|
|
void gpio_setup(void)
|
|
{
|
|
// Before GPIO works, according to d0034_efm32tg_reference_manual.pdf
|
|
// note in section 28.3.7, we'll have to enable GPIO in CMU_HFPERCLKEN0
|
|
|
|
CMU_HFPERCLKEN0 |= CMU_HFPERCLKEN0_GPIO;
|
|
|
|
gpio_set_mode(LED_PORT, GPIO_MODE_PUSHPULL, LED_PIN);
|
|
|
|
// Button PB0 is connected to pin PD8 and pulled low when pushed,
|
|
// Botton PB1 to pin PB11 (sources as for LED). Pullups and debouncing
|
|
// are alreay in place in hardware, so no filtering or pullup is
|
|
// needed.
|
|
|
|
gpio_set_mode(BUTTON0_PORT, GPIO_MODE_INPUT, BUTTON0_PIN);
|
|
gpio_set_mode(BUTTON1_PORT, GPIO_MODE_INPUT, BUTTON1_PIN);
|
|
}
|
|
|
|
void led_on(void)
|
|
{
|
|
gpio_set(LED_PORT, LED_PIN);
|
|
}
|
|
|
|
void led_off(void)
|
|
{
|
|
gpio_clear(LED_PORT, LED_PIN);
|
|
}
|
|
|
|
bool pb0_get(void)
|
|
{
|
|
return !gpio_get(GPIO_PD, GPIO8);
|
|
}
|
|
|
|
bool pb1_get(void)
|
|
{
|
|
return !gpio_get(GPIO_PB, GPIO11);
|
|
}
|