The order of the UCPD1 and UCPD2 bits as described by the
rcc_periph_clken and rcc_periph_rst enums is swapped with regard to the
datasheet. Swap them.
Fixes: https://github.com/libopencm3/libopencm3/issues/234
uses the new mechanisms introduced to address a similar problem on F7.
Tested on a medium density part (0x429) that returns the same ids as
before, tested on a high density part that now _doesnt_, but that's now
correct :)
Reduced the sea of enums, and renamed config parameters to match other
implementations, cribbing off of the G0 config, as it is closer to the level
of complexity. Updated initialization code to utilize the new values.
Added flash and LDO configuration from RCC init to be more consistent with
STM32 platform initialization.
PLL configuration on the H7 is pretty involved, and takes a number of
configurations to make it work. In order to make peripheral drivers a bit
easier to implement, working with a soft clock tree in the rcc module which
stores the clock settings for each clock as they are setup such that users
can request the clock value from the RCC module for configuration. Added
getter for the clock which allows the user to pass the base address of the
peripheral, and get the peripheral clock value for convenience.
Clock configuration is still missing values for setting up all of the kernel
clocks for the peripherals, but this is in work, and there is a framework to
do so.
Have tested to 400MHz without issue. Peripherals that are explicitly supported
are working and the clock tree values appear to follow correctly.
Added LDO settings to allow setting the scaling to support high frequencies.
In this commit, support for the different base addresses for different
F7 parts is added, but the mechanism is now in place for L1 and others.
Reviewed-by: Karl Palsson <karlp@tweak.net.au>
(whitespace fixed, commit msg reworded)
rtc_common_all never existed, and f3 has the same "v2" peripheral used
by ~all parts other than the f1. We don't have any f3 rtc test code,
but the existing code was clearly wrong, and this is at least including
the correct basic defines.
Fixes: https://github.com/libopencm3/libopencm3/issues/1106
Updates to a base set of includes to map to the h7 include files which are
mainly based on the f7 versions for simple devices (e.g. SPI, USART, GPIO).
Custom files that have been implemented from the datasheet/ref manual include
the memory map, RCC, PWR definitions, and irq.json file for generation of
nvic files for interrupt mapping.
Additional functionality, especially PLL and tweaks for non-F7 compatible
implementations coming in future commits.
Added documentation tree configuration.
Reviewed-by: Karl Palsson <karlp@tweak.net.au>
Changed dmaX_streamX to dmaX_strX in a few places for consistency
v2 "single" peripheral with a couple of tweaks :
- added registers to configure two additionnal advanced analog watchdog.
- different adc sampling time time based on channel groups.
- 8 steps adc sequence injection, using chselr/chselrmode.
And a note on the rm explaining that after every configuration change to ADC_CFGR1's
SCANDIR or CHSELRMOD or CHSELR register, user need to check that configuration
is applied before any other modification / adc conversion start.. making adc_set_reqular
a bit painfull to read..
