Some families had partially moved to peripheral api, and others were
only documenting common code, but not specific code. Delete dummy .c
files, and check that all specific apis are also being documented, not
just common apis.
They were originally used to make sure that the doxygen was generated
correctly, but that style is no longer necessary.
There may be more peripherals that can be "cleaned" like this, but let's
do them one step at a time, as we work on that area.
Turns out, there's lots of common code for flash. Pull up prefetch
on/off to start with, as there's only a single bit name different.
Pull up the definitions of common API functions too, starting with
flash_set_ws. Even if the implementations are different, things that
meant to be the same, should be defined centrally.
Only applied to STM32 doc trees at present.
Instead of declaring a group for "STM32blah" in the doc-blah.h files,
and then trying to put all the common+specific peripheral code into
those groups, (which is what led to the stub doxygen holder empty .c
files) Just use a standard name like "Peripheral APIS" and place
everything into that.
Demonstrated by converting ADC and USART peripherals, which is
definitely not complete, but it shows how to make things less magical,
and less prone to copy/paste errors. Now, you can copy/paste and it
will do the right thing, because everyone uses the same group names.
This is also how to unify the mix of "STM32blah->Periphblah" and _also_
the dangling "periph_file" modules in doxygen, it merges them together
properly, as they're intended to be really.
On some targets these weren't even being referenced, on others they
were, in all cases they were empty and contributed no value.
They _actually_ served to declare groupings for doxygen, but we can do
that in a different manner, without having to have dummy files around.
split spi stuff in three part:
- v1 : basic spi peripheral
- v1_frf : v1 spi with frf mode additional bit in spi_cr2 / spi_sr
- v2 : spi with variable datasize, fifo and other fancy stuff.
v1 maps to f1 chips
v1_frf to f2, f4 and l0,l1
v2 to f0, f3 and l4
This breaks spi_master_init API for v2 devices : function prototype from
common spi header used to be abused, with DFF bit reused for CRCL bit.
New v2 spi_master_init does not handle anymore CRCL bits, as it does not
usually mess with other crc configuration.
Instead of every "simple" target having their own duplicate file with
all the section mappings, just provide a single, simple,
"cortex-m-generic.ld" that works with our startup code and any simple
rom/ram system. This also drops the pointless copying of files all over
the place. Using -L flags properly is sufficient, and the standard file
is now in the root of the library already.
Originally sourced from: https://github.com/libopencm3/libopencm3/pull/382
fixed some typos from the manual and poor merging/rebaseing,
and one judgment call on using a specific name for a conflicting
bit definition.
The stm32fx07 is common DesignWare IP, used in both STM32 and EFM32 chips.
Rename the files to make this more clear, and easier to use in other
targets.
rcc_osc_bypass_enable and rcc_osc_bypass_disable have been copy/pasted
around for the last time! There's a compile bit to check for L0/L1, but
otherwise this is just code duplication for no gain.
The f1, f2, f4, l1 chip families have a similar "v1" i2c peripheral on board.
More recent f0, f3, l0, l3 chip families share another "v2" version of i2c.
This patch unifies headers and implementation for two types of i2c peripherals:
- rename: i2c_common_all.[ch] to i2c_common_v1.[ch]
- remove i2c_common_f24.h: extra I2C blocks are defined in specific headers
- use f3 i2c code as a basis for common "v2" i2c implementation
- add f0 i2c support: use "v2" i2c implementation
Tests:
- tested on a custom f0 board
- compile-tested both libopencm3 and libopencm3-examples for all stm32
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
The f107 ethernet peripheral is the same as in f4, and was pulled out
into lib/ethernet/mac_stm32fxx7.c in 52758bb8fdf065d46ef1ea21cc383e2dc74ee19b
This drops the duplicate code.
Fixes Github issue #694
The TSVREFE bit is defined to only be present on ADC1, so drop the
pointless adc argument. This has the added benefit of making the
API consistent with all other STM32 adc parts.
Use same names as adv-v2 peripheral uses. F1 is the only v1 peripheral
adc that has calibration modes at all.
Old:
adc_calibration(ADC1); // blocking call
New (blocking):
adc_calibrate(ADC1);
New (asynch):
adc_calibrate_async(ADC1);
// do stuff
adc_is_calibrating(ADC1); // false when calibration finished
Old routines are preserved but marked deprecated for now.
Start providing async routines for all blocking routines, to make it
easier to use libopencm3 in some RTOS environments. This is not in
anyway intended to be complete, this just covers a single blocking
routine, rcc_wait_for_osc_ready. Documentation added to the top level,
and provided for all stm32 families.
Connectivity line devices have more remaps available, and the existing code was
artificially and needlessly preventing those remaps from being set, even if
defined.
While implementing this, the existing code to handle SWJ remap was found to be
inconsistent with the reference manual and has been fixed.
Fixes github issue #369
DESIG_FLASH_SIZE is provided for all stm32 parts in desig.h, correctly defined
as 16bits. Remove the incorrect duplicate definition within the f1 flash
handling code.
Fixes github issues #621
As done by esden for the F4, remove typedefs and add prefixes to clock enums
This extends this to all stm32 families.
Let's not hide the fact that these variables are structs/enums.
We are filling up the namespace badly enough, we should be prefixing as
much as we can with the module names at least. As users we already run
often enough in namespace colisions we don't have to make it worse.
* CLOCK_3V3_xxx enums renamed to RCC_CLOCK_3V3_xxx
* clock enums (PLL, HSI, HSE ...) prefixed with RCC_
* scale enum of pwr module prefixed with PWR_
Was only in the (obviously out of date) documented example and as a
declaration. No implementations. Dropping immediately, but documentation
still needs further work.
Renamed every instance of variable CFLAGS in target specific Makefiles
to TGT_CFLAGS to free up CFLAGS for user defined compiler flags.
Added information in README.md about existence and usage of CFLAGS
environment variable in build process.
The breaking changes here changes in header location, and changes in driver
name passed down to the usb stack.
Changes affect: stm32f102/f103, stm32l1, and some f3 parts
* instead of the confusingly generic "usb" use the name "st_usbfs" for the USB
Full speed peripheral ST provides in a variety of their stm32 products.
Include directives should change as:
#include <libopencm3/stm32/usb.h> => <libopencm3/stm32/st_usbfs.h>
* instead of the confusingly specific "f103" name for the driver, use
"st_usbfs_v1" [BREAKING_CHANGE]
Instead of:
usbd_init(&stm32f103_usb_driver, .....) ==>
usbd_init(&st_usbfs_v1_usb_driver, .....) ==>
The purpose of these changes is to reduce some confusion around naming, but
primarily to prepare for the "v2" peripheral available on stm32f0/l0 and some
f3 devices.
Work by Frantisek Burian, Kuldeep Singh Dhaka, Robin Kreis, fenugrec and zyp
on irc, and all those forgotten.
We haven't yet moved everything over to any autogenerated linker scripts, so
include more common templates instead of proliferating mountains of them in
every example.
(probably because the Ref Manual erroneously required it).
This has a naughty side-effect in that unrelated user data in the BD would be wiped.
Replaced this call by clearing the RTC registers to their default values.
Tested with ET-STAMP-STM32 to verify RTC starts from power-on and reset with expected behaviour.
-ggdb3 make slightly bigger .elf files, but allows gdb to understand
macros, which libopenocm3 uses somewhat extensively. Make this the
default, and pull it up to the common base makefile, so it can be easily
substituted.
