Updates to a base set of includes to map to the h7 include files which are
mainly based on the f7 versions for simple devices (e.g. SPI, USART, GPIO).
Custom files that have been implemented from the datasheet/ref manual include
the memory map, RCC, PWR definitions, and irq.json file for generation of
nvic files for interrupt mapping.
Additional functionality, especially PLL and tweaks for non-F7 compatible
implementations coming in future commits.
Added documentation tree configuration.
Reviewed-by: Karl Palsson <karlp@tweak.net.au>
Changed dmaX_streamX to dmaX_strX in a few places for consistency
GD32F1X0 (X can be 3, 5, 7 and 9) is a series of Cortex-M3 MCUs by
GigaDevice, which features pin-to-pin package compatibility with
STM32F030 MCU line. F150 adds USB support to F130, and F170/F190 adds
CAN support.
Currently the code mainly targets GD32F130 and F150 chips. Some register
are different between F130/150 and F170/190, just like the difference
between STM32F1 Performance line and Connectivity line.
From the perspective of registers and memory map, GD32F1X0 seems like a
mixture between STM32F1 and STM32F0 (because it is designed to be
pin-to-pin compatible with F0, but with Cortex-M3 like F1). A bunch of
code are shared between STM32 and GD32, and these code are specially
processed to include the GD32 headers instead of STM32 headers when meet
GD32F1X0.
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Reviewed-by: Karl Palsson <karlp@tweak.net.au>
gd32/rcc.[ch] are forks of stm32f1/rcc
gd32/flash.[ch] are forks of stm32f0/flash
No attempts at deduplicating this have been done at this stage. We can
see where they move in the future.
Most changes are noise from doxygen.
Readme udpated to explain newer FP_FLAGS for m7
stm32f7 library is skipped if the toolchain doesn't support it yet.
All #includes now explicitly use the "<libopencm3/stm32/rcc.h>" format.
If you want to get rid of the "libopencm3" prefix in your local project you
can add a respective -I entry in your Makefile (not recommended though).
All .ld files and .a libs are installed in $(TOOLCHAIN_DIR)/lib
directly (as before), but are now renamed to avoid potential
conflicts now or in the future. Examples:
libopencm3_lpc13xx.a
libopencm3_lpc13xx.ld
libopencm3_stm32.a
libopencm3_stm32.ld
