Adding this attribute allows to avoid warnings issued by GCC in cases
when 'scb_reset_system' is used as a last call in a function with
"noreturn" attribute set(usually reset handler of some sorts)
This commit add a structure definition that represents the stack frame
layout as it is upon entering exception handler. This is useful when
one wants to alter the exception return address, or get information
about registers state saved by the CPU.
the only change this results in in the example binaries is in the
hackrf-jellybean/systick example, where the the check in
systick_set_clocksource for overflowing from the stm32 area gets used.
these register definitions are common to all cortex mcus. some of the
registers might not be implemented everywhere (especially the floating
point registers), but defining them does no harm.
this modification does not result in any changes in the example
binaries.
the cortex generic interrupts get moved to lib/cm3/vector.c, the
platorms' individual irq names, initialization and handler prototypes go
to platoform specific irq.h files.
as the vector.c file heavily depends on platoform specific headers, it
can't be built once-and-for-all in lib/cm3/, so there are inclusion
stubs in the various architecture dirs; this might be better solved with
Makefile / include path handling.
one particular file is lib/lpc43xx/vector.c; that platform's
initialization code contains an additional section to copy everything
from flash to ram (which probably performs better there). that code
still resides in the inclusion stub, and gets mashed in using defines.
would need a cleaner implementation together with the Makefile solution.
this commit contains some files of the upcoming efm32 branch, from which
it was cherry-picked.
the .bin files produced from before and after this commit only differ in
lpc43xx, where the startup sequence was subtly modified.
Adds libopencm3/cm3/assert.h header that provides assertion check macros
similar to those provided by the standard C library.
Thanks to Nicolas Schodet for help.
New doc directory with config files and generated html, LaTeX/pdf.
Makefile provided for autogeneration and explanatory README.
The project structure is hostile to doxygen, which can't cope with functions
of the same name. Doxygen is run for each family separately, and separately
for LaTeX generation. Customized layout files sort of "integrate" HTML, and
separate pdfs are generated for each family. Not ideal but seems the best
solution until doxygen changes, if at all.
file having its own group module rather than using @file.
No code changes except for the following:
gpio: Added function to map the eventout signal plus two Remap functions
dma: Prevent changing base addresses while channel enabled (see datasheet)
pwr: Added pwr.c (new file)
timer: Removed the last function that I introduced recently; there is already
an equivalent function present. Changed some parameter names for consistency.
Added scu driver file scu.c.
Modified Makefile/Makefile.include to generate .map file and use -O2 as optimization.
Modified hackrf-jellybean miniblink.c to enable 1V8 and blink LED1,2&3 with configuration of PinMux and GPIO.
All #includes now explicitly use the "<libopencm3/stm32/rcc.h>" format.
If you want to get rid of the "libopencm3" prefix in your local project you
can add a respective -I entry in your Makefile (not recommended though).
All .ld files and .a libs are installed in $(TOOLCHAIN_DIR)/lib
directly (as before), but are now renamed to avoid potential
conflicts now or in the future. Examples:
libopencm3_lpc13xx.a
libopencm3_lpc13xx.ld
libopencm3_stm32.a
libopencm3_stm32.ld
