* USB host register definitions added.
* Extracted common register and bitfield definitions
from 'otg_fs.h' and 'otg_hs.h'
into new file 'otg_common.h'.
Modified usb low-level drivers to adopt to new style of bitfields.
* Fixed typo OTG_GOTGIN -> OTG_GOTGINT (according to the datasheet)
Signed-off-by: Amir Hammad <amir.hammad@hotmail.com>
The MPU is an implementation option available for both ARMv6-M and ARMv7-M.
Remove poorly merged code that attempted to include this only for cortex m0+.
Added doxygen, updated the definitions of the RBAR register, (though if you're
really using this periperhal, you should be looking at the ref man for further
information)
Reported-by: forrestv on irc.
SCB.CCR.STKALIGN enables the automatic aligning of the stack pointer to 8 bytes
on interrupt entry. Per ARM recommendations, and for AAPCS compliance, this
bit should be enabled at all times. ARMv6M has this hardcoded to 1. Cortex M3
has this broken in rev 0, optional (default off) in rev 1, and optional
(default on) in rev 2 and later. M4(f) has optional (default on) for all
revisions, M7 has hardcoded to 1.
See Section 2.3.3 in ARM document IHI0046B:
http://infocenter.arm.com/help/topic/com.arm.doc.ihi0046b/IHI0046B_ABI_Advisory_1.pdf
To ensure that all parts behave correctly, we make sure that we hardcode the
feature on, for all parts. While not _required_ for anything other than rev1
cm3, inserting it into the common reset handler ensures no-one gets any
surprises.
Fixes Github issue #516
All STM32 family pwr.h must use LIBOPENCM3_PWR_H as include guard so that
pwr_common.h can detect that it has been referenced by pwr.h for
each family. F2 and F3 had the wrong include guard.
Fixes Github issue #513
The existing rcc_clock_setup_pll only allowed HSI as the clock source, even
though the existing clock structure contains pll source variables.
Check this value, and switch to the corresponding clock source, rather than
blindly assuming that we are tryign to operate from HSI.
(probably because the Ref Manual erroneously required it).
This has a naughty side-effect in that unrelated user data in the BD would be wiped.
Replaced this call by clearing the RTC registers to their default values.
Tested with ET-STAMP-STM32 to verify RTC starts from power-on and reset with expected behaviour.
This removes the shift from the defines, and includes them in the helper
function, making the code match the documentation, and following how the
rest of the library commonly operates.
Code using the existing defines will continue to work.
Basic helpers to at least support common configurations for the f401.
Original submission specified 5 wait states, but the reference manual and other
reviewers all believe that 2ws is sufficient for these modes.
Signed-off-by: Karl Palsson <karlp@tweak.net.au>
This makes it easier to read for most people, and makes it substantially
easier to review changes in the function signatures themselves at a
later date.
The f3 adc has separate bits for end of conversion and end of sequence.
Support those fully, with the regular enable/disable irq methods, and
the flag checking methods.
Discovered in github bug: #493
This code was copied from the f4, and blindly modified to make it seem
to work. The f3 has separate flags for EOC and EOS, it doesn't use a
second bit to configure what the EOC bit does.
Consequently, update the documentation to correctly indicate that the
EOC bits are only set per conversion.
Discovered in github bug: #493
Regression from 0cc0134f21b387a3a813feca1973c77587900ee2
When operating on registers in code that is common for both usb cores,
make sure to use the REBASE macros to operate on the correct peripheral.
Reported by: kuldeep
Fixes github issue: #495
The three existing usb drivers have no possible path that doesn't return
the object here, so I've left that comment, but it is plausible that
future drivers might have some reason that allows failing to init. We
should strive to avoid that though.
Fixes github issue: #494
The common case for SPI ports in master mode is that they are not
also running as Slaves some times. For these chips the SSOE bit must
be set (or NSS tied high). Since it is common for people to use a separate
GPIO to select remote slaves and they expect the master to always be the master
this sets that up by default.
-ggdb3 make slightly bigger .elf files, but allows gdb to understand
macros, which libopenocm3 uses somewhat extensively. Make this the
default, and pull it up to the common base makefile, so it can be easily
substituted.
While there might be other places that are missing this include, this
particular file is clearly missing them, and has resulted in a few separate bug
reports. Fix it right now, in the name of continuous improvement.
Fixes#310 and #427
This adds MCO source selection to some targets, and removes and standardizes
the mask/shift usage for all targets. For devices that support MCO2, this
supports only MCO1. No attempt has been made to extract MCO prescaler, which
is not available on all F1 and F3.
F0 should check the oscillator ready bits in the regular registers, just
like the docs claim, and just like every other stm32, rather than trying
to check for the interrupt flags.
Reported-by: n1b on irc
Signed-off-by: Karl Palsson <karlp@tweak.net.au>
This commit implements the support for one interface to have multiple
altsettings. It also adds hook that user can use to perform actions
when the alsetting switch is performed by host.
Changes:
* For backward compatibility, placed a pointer instead of allocating memory for whole interface struct.
* Always execute callback (even if the current interface alternate-settings matches).
* Multiple configuration support.
Signed-off-by: Kuldeep Singh Dhaka <kuldeepdhaka9@gmail.com>
