Added the CAN1 compatibility aliases as has been done for adc and dac to
make code reuse easier. Only for the magic enums, the raw bit
definitions remain as per the ref mans
Originally suggested as https://github.com/libopencm3/libopencm3/pull/802
rcc_osc_bypass_enable and rcc_osc_bypass_disable have been copy/pasted
around for the last time! There's a compile bit to check for L0/L1, but
otherwise this is just code duplication for no gain.
If you're interested in slightly underclocking or midrange speeds,
you're into custom environments. Drop all the "helpers" for these odd
speeds. This is not the max speed for any existing f0 part.
Signed-off-by: Karl Palsson <karlp@tweak.net.au>
The following four new functions enable clocking SoC from HSE crystal:
rcc_clock_setup_in_hse_8mhz_out_{8,16,32,48}mhz
These functions start HSE as external clock and feed its output to PLL
if higher frequency is needed.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Reviewed-by: Karl Palsson <karlp@tweak.net.au>
-> Dropped 8,16,32Mhz functions as superfluous.
- add brief descriptions for HSI clock functions
- use rcc_set_pll_source to set PLL source in RCC_CFGR
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
The f1, f2, f4, l1 chip families have a similar "v1" i2c peripheral on board.
More recent f0, f3, l0, l3 chip families share another "v2" version of i2c.
This patch unifies headers and implementation for two types of i2c peripherals:
- rename: i2c_common_all.[ch] to i2c_common_v1.[ch]
- remove i2c_common_f24.h: extra I2C blocks are defined in specific headers
- use f3 i2c code as a basis for common "v2" i2c implementation
- add f0 i2c support: use "v2" i2c implementation
Tests:
- tested on a custom f0 board
- compile-tested both libopencm3 and libopencm3-examples for all stm32
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Add three more RTC clock helper functions:
- rcc_set_rtc_clock_source
RTC on stm32/f0 can be clocked from the following three
sources: LSI, LSE (32.768Hz), HSE/32.
- rcc_enable_rtc_clock
- rcc_disable_rtc_clock
enable/disable clocking RTC module using selected clock source
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
It was never complete, even for F1 family code, and went on to be even
less complete for f0 and f3. The usefulness of a library function to
check for both the irq being enabled _and_ the status flag is highly
questionable, and caused known user confusion.
The existing, much simpler, and fully functional usart_get_flag() is
a good replacement in almost all sane use cases.
Fixes https://github.com/libopencm3/libopencm3/issues/734
Extract the calibration code from the f0, and share it with the other
adc-v2 peripheral users (f0,l0,f3,l4)
Uses the same naming set of is/async naming conventions requested by the
RTOS guys instead of having blocking only calls.
Old code:
adc_calibrate_start(ADC);
adc_calibrate_wait_finish(ADC);
New code (blocking):
adc_calibrate(ADC);
New code (asynch):
adc_calibrate_async(ADC);
// do stuff
adc_is_calibrating(ADC); // will be false when it's finished.
Old code for f0 is still available, but marked deprecated.
Start providing async routines for all blocking routines, to make it
easier to use libopencm3 in some RTOS environments. This is not in
anyway intended to be complete, this just covers a single blocking
routine, rcc_wait_for_osc_ready. Documentation added to the top level,
and provided for all stm32 families.
This is common code for f0234, keep renaming files as has become standard, even
if it's a suboptimal solution. This doesn't rename the header which was not
renamed for f3.
Reported-by: https://github.com/gtoonstra
The adc v2 periph has the same register map, but comes in two flavours, one
supporting injected channels, more watchdogs, per channel sampling times and
so on, and one "simple" version.
Pull up the f3 and f0 portions into the appropriate files, after comparing with
L0 and L4 reference manuals, even if those are not fully landed yet.
The f0, f30x and l0 have a very similar "v2" adc peripheral.
Start extracting out some of the common code, and fix the glaring bug in
adc_power_down that was affecting them both.
This is not intended to be a fully comprehensive extraction, just the first
easy steps.
As done by esden for the F4, remove typedefs and add prefixes to clock enums
This extends this to all stm32 families.
Let's not hide the fact that these variables are structs/enums.
We are filling up the namespace badly enough, we should be prefixing as
much as we can with the module names at least. As users we already run
often enough in namespace colisions we don't have to make it worse.
* CLOCK_3V3_xxx enums renamed to RCC_CLOCK_3V3_xxx
* clock enums (PLL, HSI, HSE ...) prefixed with RCC_
* scale enum of pwr module prefixed with PWR_
After adding support to the f3, add missing doxygen support to the f0
equivalent. This improves things and keeps them consistent until/if they are
pulled out as common code.
Renamed every instance of variable CFLAGS in target specific Makefiles
to TGT_CFLAGS to free up CFLAGS for user defined compiler flags.
Added information in README.md about existence and usage of CFLAGS
environment variable in build process.
Based on previous work, add a new driver for the v2 usb peripheral found on
stm32f0 and l0 devices.
Correspondingly, add a usb gadget zero test suite for the f0. L0 device level
code isn't yet ready, but will add the test case when it moves in.
Work by Frantisek Burian, Kuldeep
Singh Dhaka, Robin Kreis, fenugrec and zyp on irc, and all those forgotten.
-ggdb3 make slightly bigger .elf files, but allows gdb to understand
macros, which libopenocm3 uses somewhat extensively. Make this the
default, and pull it up to the common base makefile, so it can be easily
substituted.
This adds MCO source selection to some targets, and removes and standardizes
the mask/shift usage for all targets. For devices that support MCO2, this
supports only MCO1. No attempt has been made to extract MCO prescaler, which
is not available on all F1 and F3.
F0 should check the oscillator ready bits in the regular registers, just
like the docs claim, and just like every other stm32, rather than trying
to check for the interrupt flags.
Reported-by: n1b on irc
Signed-off-by: Karl Palsson <karlp@tweak.net.au>
Rename rcc_ppre1_frequency and rcc_ppre2_frequency to rcc_apb1_frequency and rcc_apb2_frequency
Also add rcc_ahb_frequency (although it is not set correctly in all cases) which will be fixed by
the rcc commits later. Also fixup the only use in the library of these variables, the USART code.
And fix the typos that resulted
Make l1 generic too
Pulls out duplicate calls from f0/rcc.c and uses the common version which
also means that f0 can use rcc_peripheral_enable() now which is in common
but not the old rcc versions.
This commit has been based on kuldeepdhaka's pioneer work, but it was reformatted to apply libopencm3 inclusion tree correctly.
timer_common_all.c now supports new rcc_periph_reset_pulse function for all families.
to remove variations, redundancies, add missing, fix errors. All c files
refer only to the dispatch style headers in /include/stm32. Those headers
#include memorymap.h and cm3/common.h. All references to
these are removed from the family specific headers. Ethernet untouched as
it appears incomplete.
Added dummy spi.c for F0/F3. Fix some doxygen anomalies.
