So that the navigation pane works correctly in browsers.
Some additional doc fixes put in where found (but many more still to go).
Added some dummy .c and .h files to bring the associated docs into line.
makefile changed to allow 'make html' as well as 'make doc' (the latter only does html anyway).
According to the reference manual, you are _forbidden_ from writing 00 to the
VOS[1:0] bits in PWR_CR. Writing a 00 is automatically turned into range 2,
or, 10. Attempting to then |= the bits for range 1 (01) results in the final
result of choosing voltage range 3 (11). This has fairly catastrophic effects
if you then attempt to switch to PLL clock at 32Mhz.
Oddly, the existing code was working fine on STM32L151C6 revision W, but
failing with revision V silicon. Regardless, the existing code was wrong and
not following the reference manual.
Further, attempting to change any power voltage range settings without the RCC
enabled will have no effect, so all the higher level helper routines
have added peripheral enable lines before attempting to set the range.
to remove errors, duplications and inconsistencies.
File lib/stm32/f1/pwr.c - all code removed as it duplicates that in common/pwr_common.c
Remaining changes do not affect code. Compiles OK.
TODO efm32 has no code so generates no modules
TODO F2 needs pwr.c
TODO L1 needs dma.h and dma.c
Code added for L1 to support the PWR Control block didn't properly
follow the HACKING_COMMON_DOC guidelines. The naming was wrong, and
some headers were missing. This commit has no functional changes, it
only addresses the style and structure problems.
