Add I/O mux controller which is required to mux pins according to
their used function. For all pads, the alternative function 0 is
GPIO. For different pin mux function refer to the reference manual.
This adds GPIO module support. GPIO can be controlled using the GPIO
number as stated in the reference manual, similar to Linux. Also
32-bit access to whole ports is possible. Reading a GPIO is possible
without muxing the pad as GPIO, however writing a GPIO needs the pad
to be muxed as GPIO.
Extend the clock controller module with a function to calculate
core clocks from the current registers settings. On Vybrid, we
assume that the core clocks are setup by the main operating system
running on the Cortex-A5. Nevertheless we need to know their actual
values in order to calculate other clocks or baud rates.
Verified on a Colibri VF61, which calculates following values:
ccm_core_clk: 500210526
ccm_platform_bus_clk: 166736842
ccm_ipg_bus_clk: 83368421
Add initial memorymap for Vybrid VF6xx module. Also add the clock
control module which allows to control system clocks and enable
clocks of individual pheripherials.
