4673348ff7
Very few functions can be shared (~ 3). A possible solutions is to move i2c_common_all to i2c_common_f124, create i2c_common_all and move f3/i2c to i2c_common_f3. Who agrees?
403 lines
10 KiB
C
403 lines
10 KiB
C
/** @defgroup i2c_file I2C
|
|
|
|
@ingroup STM32F3xx
|
|
|
|
@brief <b>libopencm3 STM32F3xx I2C</b>
|
|
|
|
@version 1.0.0
|
|
|
|
@date 15 October 2012
|
|
|
|
LGPL License Terms @ref lgpl_license
|
|
*/
|
|
|
|
/*
|
|
* This file is part of the libopencm3 project.
|
|
*
|
|
* This library is free software: you can redistribute it and/or modify
|
|
* it under the terms of the GNU Lesser General Public License as published by
|
|
* the Free Software Foundation, either version 3 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This library is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU Lesser General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU Lesser General Public License
|
|
* along with this library. If not, see <http://www.gnu.org/licenses/>.
|
|
*/
|
|
|
|
#include <libopencm3/stm32/i2c.h>
|
|
#include <libopencm3/stm32/rcc.h>
|
|
|
|
/**@{*/
|
|
|
|
/*---------------------------------------------------------------------------*/
|
|
/** @brief I2C Reset.
|
|
|
|
The I2C peripheral and all its associated configuration registers are placed in
|
|
the reset condition. The reset is effected via the RCC peripheral reset system.
|
|
|
|
@param[in] i2c Unsigned int32. I2C peripheral identifier @ref i2c_reg_base.
|
|
*/
|
|
|
|
void i2c_reset(uint32_t i2c)
|
|
{
|
|
switch (i2c) {
|
|
case I2C1:
|
|
rcc_peripheral_reset(&RCC_APB1RSTR, RCC_APB1RSTR_I2C1RST);
|
|
rcc_peripheral_clear_reset(&RCC_APB1RSTR, RCC_APB1RSTR_I2C1RST);
|
|
break;
|
|
case I2C2:
|
|
rcc_peripheral_reset(&RCC_APB1RSTR, RCC_APB1RSTR_I2C2RST);
|
|
rcc_peripheral_clear_reset(&RCC_APB1RSTR, RCC_APB1RSTR_I2C2RST);
|
|
break;
|
|
}
|
|
}
|
|
|
|
/*---------------------------------------------------------------------------*/
|
|
/** @brief I2C Peripheral Enable.
|
|
|
|
@param[in] i2c Unsigned int32. I2C register base address @ref i2c_reg_base.
|
|
*/
|
|
|
|
void i2c_peripheral_enable(uint32_t i2c)
|
|
{
|
|
I2C_CR1(i2c) |= I2C_CR1_PE;
|
|
}
|
|
|
|
/*---------------------------------------------------------------------------*/
|
|
/** @brief I2C Peripheral Disable.
|
|
|
|
This must not be reset while in Master mode until a communication has finished.
|
|
In Slave mode, the peripheral is disabled only after communication has ended.
|
|
|
|
@param[in] i2c Unsigned int32. I2C register base address @ref i2c_reg_base.
|
|
*/
|
|
|
|
void i2c_peripheral_disable(uint32_t i2c)
|
|
{
|
|
I2C_CR1(i2c) &= ~I2C_CR1_PE;
|
|
}
|
|
|
|
/*---------------------------------------------------------------------------*/
|
|
/** @brief I2C Send Start Condition.
|
|
|
|
If in Master mode this will cause a restart condition to occur at the end of the
|
|
current transmission. If in Slave mode, this will initiate a start condition
|
|
when the current bus activity is completed.
|
|
|
|
@param[in] i2c Unsigned int32. I2C register base address @ref i2c_reg_base.
|
|
*/
|
|
|
|
void i2c_send_start(uint32_t i2c)
|
|
{
|
|
I2C_CR2(i2c) |= I2C_CR2_START;
|
|
}
|
|
|
|
/*---------------------------------------------------------------------------*/
|
|
/** @brief I2C Send Stop Condition.
|
|
|
|
After the current byte transfer this will initiate a stop condition if in Master
|
|
mode, or simply release the bus if in Slave mode.
|
|
|
|
@param[in] i2c Unsigned int32. I2C register base address @ref i2c_reg_base.
|
|
*/
|
|
|
|
void i2c_send_stop(uint32_t i2c)
|
|
{
|
|
I2C_CR2(i2c) |= I2C_CR2_STOP;
|
|
}
|
|
|
|
/*---------------------------------------------------------------------------*/
|
|
/** @brief I2C Clear Stop Flag.
|
|
|
|
Clear the "Send Stop" flag in the I2C config register
|
|
|
|
@param[in] i2c Unsigned int32. I2C register base address @ref i2c_reg_base.
|
|
*/
|
|
void i2c_clear_stop(uint32_t i2c)
|
|
{
|
|
I2C_ICR(i2c) |= I2C_ICR_STOPCF;
|
|
}
|
|
|
|
/*---------------------------------------------------------------------------*/
|
|
/** @brief I2C Set the 7 bit Slave Address for the Peripheral.
|
|
|
|
This sets an address for Slave mode operation, in 7 bit form.
|
|
|
|
@param[in] i2c Unsigned int32. I2C register base address @ref i2c_reg_base.
|
|
@param[in] slave Unsigned int8. Slave address 0...127.
|
|
*/
|
|
|
|
void i2c_set_own_7bit_slave_address(uint32_t i2c, uint8_t slave)
|
|
{
|
|
I2C_OAR1(i2c) = (uint16_t)(slave << 1);
|
|
I2C_OAR1(i2c) &= ~I2C_OAR1_OA1MODE;
|
|
I2C_OAR1(i2c) |= (1 << 14); /* Datasheet: always keep 1 by software. */
|
|
}
|
|
|
|
/*---------------------------------------------------------------------------*/
|
|
/** @brief I2C Set the 10 bit Slave Address for the Peripheral.
|
|
|
|
This sets an address for Slave mode operation, in 10 bit form.
|
|
|
|
@todo add "I2C_OAR1(i2c) |= (1 << 14);" as above
|
|
|
|
@param[in] i2c Unsigned int32. I2C register base address @ref i2c_reg_base.
|
|
@param[in] slave Unsigned int16. Slave address 0...1023.
|
|
*/
|
|
|
|
void i2c_set_own_10bit_slave_address(uint32_t i2c, uint16_t slave)
|
|
{
|
|
I2C_OAR1(i2c) = (uint16_t)(I2C_OAR1_OA1MODE | slave);
|
|
}
|
|
|
|
/*---------------------------------------------------------------------------*/
|
|
/** @brief I2C Send Data.
|
|
|
|
@param[in] i2c Unsigned int32. I2C register base address @ref i2c_reg_base.
|
|
@param[in] data Unsigned int8. Byte to send.
|
|
*/
|
|
|
|
void i2c_send_data(uint32_t i2c, uint8_t data)
|
|
{
|
|
I2C_TXDR(i2c) = data;
|
|
}
|
|
|
|
/*---------------------------------------------------------------------------*/
|
|
/** @brief I2C Get Data.
|
|
|
|
@param[in] i2c Unsigned int32. I2C register base address @ref i2c_reg_base.
|
|
*/
|
|
uint8_t i2c_get_data(uint32_t i2c)
|
|
{
|
|
return(I2C_RXDR(i2c) & 0xff);
|
|
}
|
|
|
|
void i2c_enable_analog_filter(uint32_t i2c)
|
|
{
|
|
I2C_CR1(i2c) &= ~I2C_CR1_ANFOFF;
|
|
}
|
|
|
|
void i2c_disable_analog_filter(uint32_t i2c)
|
|
{
|
|
I2C_CR1(i2c) |= I2C_CR1_ANFOFF;
|
|
}
|
|
|
|
void i2c_set_digital_filter(uint32_t i2c, uint8_t dnf_setting)
|
|
{
|
|
I2C_CR1(i2c) = (I2C_CR1(i2c) & ~I2C_CR1_DNF_MASK) | dnf_setting;
|
|
}
|
|
|
|
/* t_presc= (presc+1)*t_i2cclk */
|
|
void i2c_set_prescaler(uint32_t i2c, uint8_t presc)
|
|
{
|
|
I2C_TIMINGR(i2c) = (I2C_TIMINGR(i2c) & ~I2C_TIMINGR_PRESC_MASK) | (presc << I2C_TIMINGR_PRESC_SHIFT);
|
|
}
|
|
|
|
void i2c_set_data_setup_time(uint32_t i2c, uint8_t s_time)
|
|
{
|
|
I2C_TIMINGR(i2c) = (I2C_TIMINGR(i2c) & ~I2C_TIMINGR_SCLDEL_MASK) | (s_time << I2C_TIMINGR_SCLDEL_SHIFT);
|
|
}
|
|
|
|
void i2c_set_data_hold_time(uint32_t i2c, uint8_t h_time)
|
|
{
|
|
I2C_TIMINGR(i2c) = (I2C_TIMINGR(i2c) & ~I2C_TIMINGR_SDADEL_MASK) | (h_time << I2C_TIMINGR_SDADEL_SHIFT);
|
|
}
|
|
|
|
void i2c_set_scl_high_period(uint32_t i2c, uint8_t period)
|
|
{
|
|
I2C_TIMINGR(i2c) = (I2C_TIMINGR(i2c) & ~I2C_TIMINGR_SCLH_MASK) | (period << I2C_TIMINGR_SCLH_SHIFT);
|
|
}
|
|
|
|
void i2c_set_scl_low_period(uint32_t i2c, uint8_t period)
|
|
{
|
|
I2C_TIMINGR(i2c) = (I2C_TIMINGR(i2c) & ~I2C_TIMINGR_SCLL_MASK) | (period << I2C_TIMINGR_SCLL_SHIFT);
|
|
}
|
|
|
|
void i2c_enable_stretching(uint32_t i2c)
|
|
{
|
|
I2C_CR1(i2c) &= ~I2C_CR1_NOSTRETCH;
|
|
}
|
|
|
|
void i2c_disable_stretching(uint32_t i2c)
|
|
{
|
|
I2C_CR1(i2c) |= I2C_CR1_NOSTRETCH;
|
|
}
|
|
|
|
void i2c_100khz_i2cclk8mhz(uint32_t i2c)
|
|
{
|
|
i2c_set_prescaler(i2c, 1);
|
|
i2c_set_scl_low_period(i2c, 0x13);
|
|
i2c_set_scl_high_period(i2c, 0xF);
|
|
i2c_set_data_hold_time(i2c, 0x2);
|
|
i2c_set_data_setup_time(i2c, 0x4);
|
|
}
|
|
|
|
void i2c_set_7bit_addr_mode(uint32_t i2c)
|
|
{
|
|
I2C_CR2(i2c) &= ~I2C_CR2_ADD10;
|
|
}
|
|
|
|
void i2c_set_10bit_addr_mode(uint32_t i2c)
|
|
{
|
|
I2C_CR2(i2c) |= I2C_CR2_ADD10;
|
|
}
|
|
|
|
void i2c_set_7bit_address(uint32_t i2c, uint8_t addr)
|
|
{
|
|
I2C_CR2(i2c) = (I2C_CR2(i2c) & ~I2C_CR2_SADD_7BIT_MASK) | ((addr & 0x7F) << I2C_CR2_SADD_7BIT_SHIFT);
|
|
}
|
|
|
|
void i2c_set_10bit_address(uint32_t i2c, uint16_t addr)
|
|
{
|
|
I2C_CR2(i2c) = (I2C_CR2(i2c) & ~I2C_CR2_SADD_10BIT_MASK) | ((addr & 0x3FF) << I2C_CR2_SADD_10BIT_SHIFT);
|
|
}
|
|
|
|
void i2c_set_write_transfer_dir(uint32_t i2c)
|
|
{
|
|
I2C_CR2(i2c) &= ~I2C_CR2_RD_WRN;
|
|
}
|
|
|
|
void i2c_set_read_transfer_dir(uint32_t i2c)
|
|
{
|
|
I2C_CR2(i2c) |= I2C_CR2_RD_WRN;
|
|
}
|
|
|
|
void i2c_set_bytes_to_transfer(uint32_t i2c, uint32_t n_bytes)
|
|
{
|
|
I2C_CR2(i2c) = (I2C_CR2(i2c) & ~I2C_CR2_NBYTES_MASK) | (n_bytes << I2C_CR2_NBYTES_SHIFT);
|
|
}
|
|
|
|
uint8_t i2c_is_start(uint32_t i2c)
|
|
{
|
|
if ((I2C_CR2(i2c) & I2C_CR2_START) != 0) {
|
|
return(1);
|
|
} else {
|
|
return(0);
|
|
}
|
|
}
|
|
|
|
void i2c_enable_autoend(uint32_t i2c)
|
|
{
|
|
I2C_CR2(i2c) |= I2C_CR2_AUTOEND;
|
|
}
|
|
|
|
void i2c_disable_autoend(uint32_t i2c)
|
|
{
|
|
I2C_CR2(i2c) &= ~I2C_CR2_AUTOEND;
|
|
}
|
|
|
|
uint8_t i2c_nack(uint32_t i2c)
|
|
{
|
|
if ((I2C_ISR(i2c) & I2C_ISR_NACKF) != 0) {
|
|
return(1);
|
|
} else {
|
|
return(0);
|
|
}
|
|
}
|
|
|
|
uint8_t i2c_busy(uint32_t i2c)
|
|
{
|
|
if ((I2C_ISR(i2c) & I2C_ISR_BUSY) != 0) {
|
|
return(1);
|
|
} else {
|
|
return(0);
|
|
}
|
|
}
|
|
|
|
uint8_t i2c_transmit_int_status(uint32_t i2c)
|
|
{
|
|
if ((I2C_ISR(i2c) & I2C_ISR_TXIS) != 0) {
|
|
return(1);
|
|
} else {
|
|
return(0);
|
|
}
|
|
}
|
|
|
|
uint8_t i2c_transfer_complete(uint32_t i2c)
|
|
{
|
|
if ((I2C_ISR(i2c) & I2C_ISR_TC) != 0) {
|
|
return(1);
|
|
} else {
|
|
return(0);
|
|
}
|
|
}
|
|
|
|
uint8_t i2c_received_data(uint32_t i2c)
|
|
{
|
|
if ((I2C_ISR(i2c) & I2C_ISR_RXNE) != 0) {
|
|
return(1);
|
|
} else {
|
|
return(0);
|
|
}
|
|
}
|
|
|
|
|
|
/*---------------------------------------------------------------------------*/
|
|
/** @brief I2C Enable Interrupt
|
|
|
|
@param[in] i2c Unsigned int32. I2C register base address @ref i2c_reg_base.
|
|
@param[in] interrupt Unsigned int32. Interrupt to enable.
|
|
*/
|
|
void i2c_enable_interrupt(uint32_t i2c, uint32_t interrupt)
|
|
{
|
|
I2C_CR1(i2c) |= interrupt;
|
|
}
|
|
|
|
/*---------------------------------------------------------------------------*/
|
|
/** @brief I2C Disable Interrupt
|
|
|
|
@param[in] i2c Unsigned int32. I2C register base address @ref i2c_reg_base.
|
|
@param[in] interrupt Unsigned int32. Interrupt to disable.
|
|
*/
|
|
void i2c_disable_interrupt(uint32_t i2c, uint32_t interrupt)
|
|
{
|
|
I2C_CR1(i2c) &= ~interrupt;
|
|
}
|
|
|
|
/*---------------------------------------------------------------------------*/
|
|
/** @brief I2C Enable reception DMA
|
|
|
|
@param[in] i2c Unsigned int32. I2C register base address @ref i2c_reg_base.
|
|
*/
|
|
void i2c_enable_rxdma(uint32_t i2c)
|
|
{
|
|
I2C_CR1(i2c) |= I2C_CR1_RXDMAEN;
|
|
}
|
|
|
|
/*---------------------------------------------------------------------------*/
|
|
/** @brief I2C Disable reception DMA
|
|
|
|
@param[in] i2c Unsigned int32. I2C register base address @ref i2c_reg_base.
|
|
*/
|
|
void i2c_disable_rxdma(uint32_t i2c)
|
|
{
|
|
I2C_CR1(i2c) &= ~I2C_CR1_RXDMAEN;
|
|
}
|
|
|
|
/*---------------------------------------------------------------------------*/
|
|
/** @brief I2C Enable transmission DMA
|
|
|
|
@param[in] i2c Unsigned int32. I2C register base address @ref i2c_reg_base.
|
|
*/
|
|
void i2c_enable_txdma(uint32_t i2c)
|
|
{
|
|
I2C_CR1(i2c) |= I2C_CR1_TXDMAEN;
|
|
}
|
|
|
|
/*---------------------------------------------------------------------------*/
|
|
/** @brief I2C Disable transmission DMA
|
|
|
|
@param[in] i2c Unsigned int32. I2C register base address @ref i2c_reg_base.
|
|
*/
|
|
void i2c_disable_txdma(uint32_t i2c)
|
|
{
|
|
I2C_CR1(i2c) &= ~I2C_CR1_TXDMAEN;
|
|
}
|
|
|
|
/**@}*/
|
|
|