For both v1 and v2, provide routines to help do arbitrary length
write/read transfers.
Tested with multiple byte writes and reads, for both 100khz and 400khz,
with repeated starts and stop/starts. However, only tested (presently)
with a single i2c target device, a Sensiron SHT21 sensor. Extended
testing against eeproms and alternative devices would be useful
The f1, f2, f4, l1 chip families have a similar "v1" i2c peripheral on board.
More recent f0, f3, l0, l3 chip families share another "v2" version of i2c.
This patch unifies headers and implementation for two types of i2c peripherals:
- rename: i2c_common_all.[ch] to i2c_common_v1.[ch]
- remove i2c_common_f24.h: extra I2C blocks are defined in specific headers
- use f3 i2c code as a basis for common "v2" i2c implementation
- add f0 i2c support: use "v2" i2c implementation
Tests:
- tested on a custom f0 board
- compile-tested both libopencm3 and libopencm3-examples for all stm32
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
It was never complete, even for F1 family code, and went on to be even
less complete for f0 and f3. The usefulness of a library function to
check for both the irq being enabled _and_ the status flag is highly
questionable, and caused known user confusion.
The existing, much simpler, and fully functional usart_get_flag() is
a good replacement in almost all sane use cases.
Fixes https://github.com/libopencm3/libopencm3/issues/734
Simplified blocking API, with an async routine if you really need it.
Follows as best as I can understand the reference manual, but testing
those conditions will be difficult.
Extract the calibration code from the f0, and share it with the other
adc-v2 peripheral users (f0,l0,f3,l4)
Uses the same naming set of is/async naming conventions requested by the
RTOS guys instead of having blocking only calls.
Old code:
adc_calibrate_start(ADC);
adc_calibrate_wait_finish(ADC);
New code (blocking):
adc_calibrate(ADC);
New code (asynch):
adc_calibrate_async(ADC);
// do stuff
adc_is_calibrating(ADC); // will be false when it's finished.
Old code for f0 is still available, but marked deprecated.
This is common code for f0234, keep renaming files as has become standard, even
if it's a suboptimal solution. This doesn't rename the header which was not
renamed for f3.
Reported-by: https://github.com/gtoonstra
The f0, f30x and l0 have a very similar "v2" adc peripheral.
Start extracting out some of the common code, and fix the glaring bug in
adc_power_down that was affecting them both.
This is not intended to be a fully comprehensive extraction, just the first
easy steps.
All defined bits are rc_w0.
The paranoid version of this would write 0 to the reserved bits (0 is the
"reset value"), but this would require knowing which flags are valid on the
actual platform, and adding the corresponding macros.
As done by esden for the F4, remove typedefs and add prefixes to clock enums
This extends this to all stm32 families.
Let's not hide the fact that these variables are structs/enums.
We are filling up the namespace badly enough, we should be prefixing as
much as we can with the module names at least. As users we already run
often enough in namespace colisions we don't have to make it worse.
* CLOCK_3V3_xxx enums renamed to RCC_CLOCK_3V3_xxx
* clock enums (PLL, HSI, HSE ...) prefixed with RCC_
* scale enum of pwr module prefixed with PWR_
These prototypes affect functions defined by application code. Only
the implementations in libopencm3 are supposed to be weak; the
functions in application code should definitely not be. Otherwise,
you'll end up with two weak symbols being linked together, and
it's luck as to which one the linker picks.
Was only in the (obviously out of date) documented example and as a
declaration. No implementations. Dropping immediately, but documentation
still needs further work.
The breaking changes here changes in header location, and changes in driver
name passed down to the usb stack.
Changes affect: stm32f102/f103, stm32l1, and some f3 parts
* instead of the confusingly generic "usb" use the name "st_usbfs" for the USB
Full speed peripheral ST provides in a variety of their stm32 products.
Include directives should change as:
#include <libopencm3/stm32/usb.h> => <libopencm3/stm32/st_usbfs.h>
* instead of the confusingly specific "f103" name for the driver, use
"st_usbfs_v1" [BREAKING_CHANGE]
Instead of:
usbd_init(&stm32f103_usb_driver, .....) ==>
usbd_init(&st_usbfs_v1_usb_driver, .....) ==>
The purpose of these changes is to reduce some confusion around naming, but
primarily to prepare for the "v2" peripheral available on stm32f0/l0 and some
f3 devices.
Work by Frantisek Burian, Kuldeep Singh Dhaka, Robin Kreis, fenugrec and zyp
on irc, and all those forgotten.
