This removes the shift from the defines, and includes them in the helper
function, making the code match the documentation, and following how the
rest of the library commonly operates.
Code using the existing defines will continue to work.
Basic helpers to at least support common configurations for the f401.
Original submission specified 5 wait states, but the reference manual and other
reviewers all believe that 2ws is sufficient for these modes.
Signed-off-by: Karl Palsson <karlp@tweak.net.au>
The f3 adc has separate bits for end of conversion and end of sequence.
Support those fully, with the regular enable/disable irq methods, and
the flag checking methods.
Discovered in github bug: #493
This code was copied from the f4, and blindly modified to make it seem
to work. The f3 has separate flags for EOC and EOS, it doesn't use a
second bit to configure what the EOC bit does.
Consequently, update the documentation to correctly indicate that the
EOC bits are only set per conversion.
Discovered in github bug: #493
This adds MCO source selection to some targets, and removes and standardizes
the mask/shift usage for all targets. For devices that support MCO2, this
supports only MCO1. No attempt has been made to extract MCO prescaler, which
is not available on all F1 and F3.
When writing the USB endpoint register, USB_EP_RX_CTR (bit 15) and
USB_EP_TX_CTR (bit 7) should be set to avoid inadvertently clearing
either bit.
Prior to this patch end points could indefinately stall if the hardware
changed these bits between the time they are read and when they were
written.
Signed-off-by: George McCollister <george.mccollister@gmail.com>
Added CLR_REG_BIT_MSK_AND_SET and TOG_SET_REG_BIT_MSK_AND_SET because we
need version of CLR_REG_BIT_MSK and TOG_SET_REG_BIT_MSK that allow us to
OR in bits before the register is written.
Signed-off-by: George McCollister <george.mccollister@gmail.com>
Rename rcc_ppre1_frequency and rcc_ppre2_frequency to rcc_apb1_frequency and rcc_apb2_frequency
Also add rcc_ahb_frequency (although it is not set correctly in all cases) which will be fixed by
the rcc commits later. Also fixup the only use in the library of these variables, the USART code.
And fix the typos that resulted
Make l1 generic too
Pulls out duplicate calls from f0/rcc.c and uses the common version which
also means that f0 can use rcc_peripheral_enable() now which is in common
but not the old rcc versions.
Tested with a miniblink example on the l053 discovery board.
Only register definitions at this stage, no helpers.
Register definitions from RM0367r2, hopefully the biggest
superset of L0 parts.
Signed-off-by: Karl Palsson <karlp@tweak.net.au>
F100 has more remap options than F10x, particularly on the High Density
devices.
Fixes github issue #365
Signed-off-by: Karl Palsson <karlp@tweak.net.au>
The bits definitions for direct manipulation were missing, and should be
present for completeness. However, this only affects the legacy (error prone)
API, replaced some time ago.
old and error prone: (stop using code like this)
rcc_peripheral_enable_clock(&RCC_APB2ENR, RCC_APB2ENR_TIM16EN);
rcc_peripheral_reset(&RCC_APB2RSTR, RCC_APB2RSTR_TIM16RST);
new:
rcc_periph_clock_enable(RCC_TIM16);
rcc_periph_reset_{pulse,hold,release}(RCC_TIM16);
Fixes github issue #361
Latest versions of all reference manuals refer to the address as SPIx_BASE, and
simply name some of the individual registers as SPI_I2SXXXX. Likewise, the
interrupts are simply SPIx, not SPIx/I2Sx. Rather than hacking more duplicates
into the F0 and L0 parts where this was turning up, remove the pointless _I2S_
from SPI2/SPI3 and make it all consistent
Compile tested only, with the examples collection.
Signed-off-by: Karl Palsson <karlp@tweak.net.au>
Fixes#331Fixes#347
There's more exti lines on many more devices now. F0 and F3 have extras, as did
L1 and L0. There's no real reason not to have higher order EXTI definitions
defined at the top level, and it reduces the number of files to merge together
to find all definitions for the bigger devices.
Signed-off-by: Karl Palsson <karlp@tweak.net.au>
Fixes#338
