Add object files to Makefile to include new modules into lib.
Correct typo in pwr.c
Add two new functions to timer.c to preset the counter (for use
with deadman style timeouts) and to identify an interrupt
source.
Also noticed lib/makefile.include didn't clean lib/stm32, which
isn't a target. Added a fix.
file having its own group module rather than using @file.
No code changes except for the following:
gpio: Added function to map the eventout signal plus two Remap functions
dma: Prevent changing base addresses while channel enabled (see datasheet)
pwr: Added pwr.c (new file)
timer: Removed the last function that I introduced recently; there is already
an equivalent function present. Changed some parameter names for consistency.
1. Remove the extra mask (TIM_DIER(timer_peripheral) & flag)
in timer_get_flag. Not all flags in SR relate to IRQs and the flags that
do might be useful even if interrupts not enabled.
2. In a number of functions (e.g. timer_set_output_idle_state) that only
apply to advanced timers, add test for TIM1 and TIM8, as done in some others.
3. Added timer_force_event to manipulate the EG register
TBD DMA burst - can't get my head around why this would be useful.
Someone must have thought so!
All #includes now explicitly use the "<libopencm3/stm32/rcc.h>" format.
If you want to get rid of the "libopencm3" prefix in your local project you
can add a respective -I entry in your Makefile (not recommended though).
All .ld files and .a libs are installed in $(TOOLCHAIN_DIR)/lib
directly (as before), but are now renamed to avoid potential
conflicts now or in the future. Examples:
libopencm3_lpc13xx.a
libopencm3_lpc13xx.ld
libopencm3_stm32.a
libopencm3_stm32.ld
