Pulls out duplicate calls from f0/rcc.c and uses the common version which
also means that f0 can use rcc_peripheral_enable() now which is in common
but not the old rcc versions.
Tested with a miniblink example on the l053 discovery board.
Only register definitions at this stage, no helpers.
Register definitions from RM0367r2, hopefully the biggest
superset of L0 parts.
Signed-off-by: Karl Palsson <karlp@tweak.net.au>
F100 has more remap options than F10x, particularly on the High Density
devices.
Fixes github issue #365
Signed-off-by: Karl Palsson <karlp@tweak.net.au>
The bits definitions for direct manipulation were missing, and should be
present for completeness. However, this only affects the legacy (error prone)
API, replaced some time ago.
old and error prone: (stop using code like this)
rcc_peripheral_enable_clock(&RCC_APB2ENR, RCC_APB2ENR_TIM16EN);
rcc_peripheral_reset(&RCC_APB2RSTR, RCC_APB2RSTR_TIM16RST);
new:
rcc_periph_clock_enable(RCC_TIM16);
rcc_periph_reset_{pulse,hold,release}(RCC_TIM16);
Fixes github issue #361
Add I/O mux controller which is required to mux pins according to
their used function. For all pads, the alternative function 0 is
GPIO. For different pin mux function refer to the reference manual.
This adds GPIO module support. GPIO can be controlled using the GPIO
number as stated in the reference manual, similar to Linux. Also
32-bit access to whole ports is possible. Reading a GPIO is possible
without muxing the pad as GPIO, however writing a GPIO needs the pad
to be muxed as GPIO.
This adds UART support for Vybrid VF6xx. Baud rate is calculated
from IPG clock, which need to be initialized by using the
ccm_calculate_clocks functions. Also clock need to be gated using
the ccm_clock_gate_enable function. Tested with an unitialized
UART with a baud rate of 115200.
Extend the clock controller module with a function to calculate
core clocks from the current registers settings. On Vybrid, we
assume that the core clocks are setup by the main operating system
running on the Cortex-A5. Nevertheless we need to know their actual
values in order to calculate other clocks or baud rates.
Verified on a Colibri VF61, which calculates following values:
ccm_core_clk: 500210526
ccm_platform_bus_clk: 166736842
ccm_ipg_bus_clk: 83368421
Add initial memorymap for Vybrid VF6xx module. Also add the clock
control module which allows to control system clocks and enable
clocks of individual pheripherials.
Freescale Vybrid is a familiy of ARM SoC, wheras the VF6xx models
have two cores in one SoC, a Cortex-A5 and a Cortex-M4. This adds
initial support for the Cortex-M4 in the libopencm3 library.
By using two different ram areas (pc_ram and ps_ram) the user can
put the code in a RAM area bounded to the code bus. The data can
be stored in the data area. However, currently the initial values
of for the variables in the data section are stored in the code
section and copied to the ram section by the initialization code
(like it's copied from ROM to RAM on microcontrollers).
Latest versions of all reference manuals refer to the address as SPIx_BASE, and
simply name some of the individual registers as SPI_I2SXXXX. Likewise, the
interrupts are simply SPIx, not SPIx/I2Sx. Rather than hacking more duplicates
into the F0 and L0 parts where this was turning up, remove the pointless _I2S_
from SPI2/SPI3 and make it all consistent
Compile tested only, with the examples collection.
Signed-off-by: Karl Palsson <karlp@tweak.net.au>
Fixes#331Fixes#347
There's more exti lines on many more devices now. F0 and F3 have extras, as did
L1 and L0. There's no real reason not to have higher order EXTI definitions
defined at the top level, and it reduces the number of files to merge together
to find all definitions for the bigger devices.
Signed-off-by: Karl Palsson <karlp@tweak.net.au>
Fixes#338
This commit has been based on kuldeepdhaka's pioneer work, but it was reformatted to apply libopencm3 inclusion tree correctly.
timer_common_all.c now supports new rcc_periph_reset_pulse function for all families.
to remove variations, redundancies, add missing, fix errors. All c files
refer only to the dispatch style headers in /include/stm32. Those headers
#include memorymap.h and cm3/common.h. All references to
these are removed from the family specific headers. Ethernet untouched as
it appears incomplete.
Added dummy spi.c for F0/F3. Fix some doxygen anomalies.
