Final chunk of register definitions to be pulled up.
Now the "target" files are _only_ defining the list of u(s)arts
available, and any _specific_ functions for that target.
Just small pieces at a time to make it easy to see what's happening.
Taking definitions currently implemented in both f0/f3 headers and
making combined, documented versions in the -v2 header.
Instead of declaring that _every_ device has USART1,2,3 and UART4,5, let
the targets themselves define what periphs they do, along with their
USARTx_BASE defines, and let the common headers just have the common
abstractions.
Similar to how we have abstract defines for the stop bits, parity and
flow control common mode namees, provide abstract flag names for the
"standard" flags. This allows us to start using common API code for v1
and v2 uarts
For stm32f3, drop the "compatibility" defines that simply pollute the
namespace, making it confusingly appear as if f3 has both SR and ISR
registers.
Only pulling out the _common_ stuff. This is a single step in a long
process of eliminating all the duplication and "same, but different"
implementations that are stalling adding nice clean easy support for
l0/f7/l4.
This _ignores_ all currently conflict register definitions, even if they
"do the same thing" it just pulls up the common stuff. A subsequent
commit can look at resolving the implementatations to a single version.
rcc_osc_bypass_enable and rcc_osc_bypass_disable have been copy/pasted
around for the last time! There's a compile bit to check for L0/L1, but
otherwise this is just code duplication for no gain.
For both v1 and v2, provide routines to help do arbitrary length
write/read transfers.
Tested with multiple byte writes and reads, for both 100khz and 400khz,
with repeated starts and stop/starts. However, only tested (presently)
with a single i2c target device, a Sensiron SHT21 sensor. Extended
testing against eeproms and alternative devices would be useful
The f1, f2, f4, l1 chip families have a similar "v1" i2c peripheral on board.
More recent f0, f3, l0, l3 chip families share another "v2" version of i2c.
This patch unifies headers and implementation for two types of i2c peripherals:
- rename: i2c_common_all.[ch] to i2c_common_v1.[ch]
- remove i2c_common_f24.h: extra I2C blocks are defined in specific headers
- use f3 i2c code as a basis for common "v2" i2c implementation
- add f0 i2c support: use "v2" i2c implementation
Tests:
- tested on a custom f0 board
- compile-tested both libopencm3 and libopencm3-examples for all stm32
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
It was never complete, even for F1 family code, and went on to be even
less complete for f0 and f3. The usefulness of a library function to
check for both the irq being enabled _and_ the status flag is highly
questionable, and caused known user confusion.
The existing, much simpler, and fully functional usart_get_flag() is
a good replacement in almost all sane use cases.
Fixes https://github.com/libopencm3/libopencm3/issues/734
Simplified blocking API, with an async routine if you really need it.
Follows as best as I can understand the reference manual, but testing
those conditions will be difficult.
Extract the calibration code from the f0, and share it with the other
adc-v2 peripheral users (f0,l0,f3,l4)
Uses the same naming set of is/async naming conventions requested by the
RTOS guys instead of having blocking only calls.
Old code:
adc_calibrate_start(ADC);
adc_calibrate_wait_finish(ADC);
New code (blocking):
adc_calibrate(ADC);
New code (asynch):
adc_calibrate_async(ADC);
// do stuff
adc_is_calibrating(ADC); // will be false when it's finished.
Old code for f0 is still available, but marked deprecated.
Start providing async routines for all blocking routines, to make it
easier to use libopencm3 in some RTOS environments. This is not in
anyway intended to be complete, this just covers a single blocking
routine, rcc_wait_for_osc_ready. Documentation added to the top level,
and provided for all stm32 families.
L4 and F3 actually have the same bits to write in the same order, but F3 hides
the name of the deep power down bit. Keep the like that for now, but there's a
standard API for enabling and disabling the regulator.
