While on all current chips, exticr gpio port mux selection is coded on 4 bits,
stm32g0 EXTI_EXTICR register uses 8 bits. Align all exti header to reference
that value (was previously defined for f0 as SYCFG_EXTICR_SKIP)
All the "f" type flash parts have an EOP flag, even if it's in different
bit positions. Add a header for this common functionality, and move
it's implementation to the existing common file.
Turns out, there's lots of common code for flash. Pull up prefetch
on/off to start with, as there's only a single bit name different.
Pull up the definitions of common API functions too, starting with
flash_set_ws. Even if the implementations are different, things that
meant to be the same, should be defined centrally.
Only applied to STM32 doc trees at present.
Instead of declaring a group for "STM32blah" in the doc-blah.h files,
and then trying to put all the common+specific peripheral code into
those groups, (which is what led to the stub doxygen holder empty .c
files) Just use a standard name like "Peripheral APIS" and place
everything into that.
Demonstrated by converting ADC and USART peripherals, which is
definitely not complete, but it shows how to make things less magical,
and less prone to copy/paste errors. Now, you can copy/paste and it
will do the right thing, because everyone uses the same group names.
This is also how to unify the mix of "STM32blah->Periphblah" and _also_
the dangling "periph_file" modules in doxygen, it merges them together
properly, as they're intended to be really.
split spi stuff in three part:
- v1 : basic spi peripheral
- v1_frf : v1 spi with frf mode additional bit in spi_cr2 / spi_sr
- v2 : spi with variable datasize, fifo and other fancy stuff.
v1 maps to f1 chips
v1_frf to f2, f4 and l0,l1
v2 to f0, f3 and l4
This breaks spi_master_init API for v2 devices : function prototype from
common spi header used to be abused, with DFF bit reused for CRCL bit.
New v2 spi_master_init does not handle anymore CRCL bits, as it does not
usually mess with other crc configuration.
stm32f0, l3, l4 are currently sharing the same duplicated header, and
stm32l0 uses the same peripheral. Stop copy-pasting stuff and centralize
definitions into a iwdg_common_v2.h header.
Final chunk of register definitions to be pulled up.
Now the "target" files are _only_ defining the list of u(s)arts
available, and any _specific_ functions for that target.
Just small pieces at a time to make it easy to see what's happening.
Taking definitions currently implemented in both f0/f3 headers and
making combined, documented versions in the -v2 header.
Use the usart-common base plus the usart-v2 code, instead of private
implementations. Less code, more common apis across targets.
Of note is the trick to make F0 look like it has an APB2 bus. It's the
only stm32 that doesn't have a documented APB2 bus, but still has
peripherals enabled via an "APB2" register, and they match how other
targets have an APB2. Simply make APB2 an alias of APB1, as it's only
used for clock speed detection.
Only pulling out the _common_ stuff. This is a single step in a long
process of eliminating all the duplication and "same, but different"
implementations that are stalling adding nice clean easy support for
l0/f7/l4.
This _ignores_ all currently conflict register definitions, even if they
"do the same thing" it just pulls up the common stuff. A subsequent
commit can look at resolving the implementatations to a single version.
Added the CAN1 compatibility aliases as has been done for adc and dac to
make code reuse easier. Only for the magic enums, the raw bit
definitions remain as per the ref mans
Originally suggested as https://github.com/libopencm3/libopencm3/pull/802
rcc_osc_bypass_enable and rcc_osc_bypass_disable have been copy/pasted
around for the last time! There's a compile bit to check for L0/L1, but
otherwise this is just code duplication for no gain.
Originally suggested in https://github.com/libopencm3/libopencm3/pull/399
At least provide macros for each family that allows easy masking of the
full set of reset reason flags. Trying to provide a function that
provides these in random upper bits seems unclear at best.
If you're interested in slightly underclocking or midrange speeds,
you're into custom environments. Drop all the "helpers" for these odd
speeds. This is not the max speed for any existing f0 part.
Signed-off-by: Karl Palsson <karlp@tweak.net.au>
The following four new functions enable clocking SoC from HSE crystal:
rcc_clock_setup_in_hse_8mhz_out_{8,16,32,48}mhz
These functions start HSE as external clock and feed its output to PLL
if higher frequency is needed.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Reviewed-by: Karl Palsson <karlp@tweak.net.au>
-> Dropped 8,16,32Mhz functions as superfluous.
The f1, f2, f4, l1 chip families have a similar "v1" i2c peripheral on board.
More recent f0, f3, l0, l3 chip families share another "v2" version of i2c.
This patch unifies headers and implementation for two types of i2c peripherals:
- rename: i2c_common_all.[ch] to i2c_common_v1.[ch]
- remove i2c_common_f24.h: extra I2C blocks are defined in specific headers
- use f3 i2c code as a basis for common "v2" i2c implementation
- add f0 i2c support: use "v2" i2c implementation
Tests:
- tested on a custom f0 board
- compile-tested both libopencm3 and libopencm3-examples for all stm32
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Add three more RTC clock helper functions:
- rcc_set_rtc_clock_source
RTC on stm32/f0 can be clocked from the following three
sources: LSI, LSE (32.768Hz), HSE/32.
- rcc_enable_rtc_clock
- rcc_disable_rtc_clock
enable/disable clocking RTC module using selected clock source
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
It was never complete, even for F1 family code, and went on to be even
less complete for f0 and f3. The usefulness of a library function to
check for both the irq being enabled _and_ the status flag is highly
questionable, and caused known user confusion.
The existing, much simpler, and fully functional usart_get_flag() is
a good replacement in almost all sane use cases.
Fixes https://github.com/libopencm3/libopencm3/issues/734
Extract the calibration code from the f0, and share it with the other
adc-v2 peripheral users (f0,l0,f3,l4)
Uses the same naming set of is/async naming conventions requested by the
RTOS guys instead of having blocking only calls.
Old code:
adc_calibrate_start(ADC);
adc_calibrate_wait_finish(ADC);
New code (blocking):
adc_calibrate(ADC);
New code (asynch):
adc_calibrate_async(ADC);
// do stuff
adc_is_calibrating(ADC); // will be false when it's finished.
Old code for f0 is still available, but marked deprecated.
This is common code for f0234, keep renaming files as has become standard, even
if it's a suboptimal solution. This doesn't rename the header which was not
renamed for f3.
Reported-by: https://github.com/gtoonstra
The adc v2 periph has the same register map, but comes in two flavours, one
supporting injected channels, more watchdogs, per channel sampling times and
so on, and one "simple" version.
Pull up the f3 and f0 portions into the appropriate files, after comparing with
L0 and L4 reference manuals, even if those are not fully landed yet.
The f0, f30x and l0 have a very similar "v2" adc peripheral.
Start extracting out some of the common code, and fix the glaring bug in
adc_power_down that was affecting them both.
This is not intended to be a fully comprehensive extraction, just the first
easy steps.
At least temp sensor, vrefint and vbat/vlcd should have consistent names and
consistent doxygen.
Dropped channel definitions that are the same as the raw number.
As done by esden for the F4, remove typedefs and add prefixes to clock enums
This extends this to all stm32 families.
Let's not hide the fact that these variables are structs/enums.
We are filling up the namespace badly enough, we should be prefixing as
much as we can with the module names at least. As users we already run
often enough in namespace colisions we don't have to make it worse.
* CLOCK_3V3_xxx enums renamed to RCC_CLOCK_3V3_xxx
* clock enums (PLL, HSI, HSE ...) prefixed with RCC_
* scale enum of pwr module prefixed with PWR_
