Some families had partially moved to peripheral api, and others were
only documenting common code, but not specific code. Delete dummy .c
files, and check that all specific apis are also being documented, not
just common apis.
Turns out, there's lots of common code for flash. Pull up prefetch
on/off to start with, as there's only a single bit name different.
Pull up the definitions of common API functions too, starting with
flash_set_ws. Even if the implementations are different, things that
meant to be the same, should be defined centrally.
On some targets these weren't even being referenced, on others they
were, in all cases they were empty and contributed no value.
They _actually_ served to declare groupings for doxygen, but we can do
that in a different manner, without having to have dummy files around.
split spi stuff in three part:
- v1 : basic spi peripheral
- v1_frf : v1 spi with frf mode additional bit in spi_cr2 / spi_sr
- v2 : spi with variable datasize, fifo and other fancy stuff.
v1 maps to f1 chips
v1_frf to f2, f4 and l0,l1
v2 to f0, f3 and l4
This breaks spi_master_init API for v2 devices : function prototype from
common spi header used to be abused, with DFF bit reused for CRCL bit.
New v2 spi_master_init does not handle anymore CRCL bits, as it does not
usually mess with other crc configuration.
Use the usart-common base plus the usart-v2 code, instead of private
implementations. Less code, more common apis across targets.
Of note is the trick to make F0 look like it has an APB2 bus. It's the
only stm32 that doesn't have a documented APB2 bus, but still has
peripherals enabled via an "APB2" register, and they match how other
targets have an APB2. Simply make APB2 an alias of APB1, as it's only
used for clock speed detection.
Added the CAN1 compatibility aliases as has been done for adc and dac to
make code reuse easier. Only for the magic enums, the raw bit
definitions remain as per the ref mans
Originally suggested as https://github.com/libopencm3/libopencm3/pull/802
The f1, f2, f4, l1 chip families have a similar "v1" i2c peripheral on board.
More recent f0, f3, l0, l3 chip families share another "v2" version of i2c.
This patch unifies headers and implementation for two types of i2c peripherals:
- rename: i2c_common_all.[ch] to i2c_common_v1.[ch]
- remove i2c_common_f24.h: extra I2C blocks are defined in specific headers
- use f3 i2c code as a basis for common "v2" i2c implementation
- add f0 i2c support: use "v2" i2c implementation
Tests:
- tested on a custom f0 board
- compile-tested both libopencm3 and libopencm3-examples for all stm32
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
This is common code for f0234, keep renaming files as has become standard, even
if it's a suboptimal solution. This doesn't rename the header which was not
renamed for f3.
Reported-by: https://github.com/gtoonstra
The f0, f30x and l0 have a very similar "v2" adc peripheral.
Start extracting out some of the common code, and fix the glaring bug in
adc_power_down that was affecting them both.
This is not intended to be a fully comprehensive extraction, just the first
easy steps.
Renamed every instance of variable CFLAGS in target specific Makefiles
to TGT_CFLAGS to free up CFLAGS for user defined compiler flags.
Added information in README.md about existence and usage of CFLAGS
environment variable in build process.
Based on previous work, add a new driver for the v2 usb peripheral found on
stm32f0 and l0 devices.
Correspondingly, add a usb gadget zero test suite for the f0. L0 device level
code isn't yet ready, but will add the test case when it moves in.
Work by Frantisek Burian, Kuldeep
Singh Dhaka, Robin Kreis, fenugrec and zyp on irc, and all those forgotten.
-ggdb3 make slightly bigger .elf files, but allows gdb to understand
macros, which libopenocm3 uses somewhat extensively. Make this the
default, and pull it up to the common base makefile, so it can be easily
substituted.
Pulls out duplicate calls from f0/rcc.c and uses the common version which
also means that f0 can use rcc_peripheral_enable() now which is in common
but not the old rcc versions.
This commit has been based on kuldeepdhaka's pioneer work, but it was reformatted to apply libopencm3 inclusion tree correctly.
timer_common_all.c now supports new rcc_periph_reset_pulse function for all families.
On linux, the output of CP rule was try to write to / which is - of course, forbidden for write.
This solution adds to each part of lib correct pointer to the root of lib where the libs should be written.
Bug found by Kuldeep Singh Dhaka.
Extension of code for STM32F1 to allow for dual bank series XL.
Small changes to documentation for F2, F4 and L1 to add a parameter reference.
Tested with STM32F103RBT6
(note: tests show that the PG bit must be cleared after programming, otherwise
a subsequent erase attempt fails. This has been added to flash_program_half_word
for F0 and F1 only. A fix for the other families is not included in this PR.)
