L4 and F3 actually have the same bits to write in the same order, but F3 hides
the name of the deep power down bit. Keep the like that for now, but there's a
standard API for enabling and disabling the regulator.
Now that the big pieces of the adc-v2 common files are in place, start
including l0 in the builds. This includes only the very very basic core v2
peripheral functions, and the very basic definitions.
The adc v2 periph has the same register map, but comes in two flavours, one
supporting injected channels, more watchdogs, per channel sampling times and
so on, and one "simple" version.
Pull up the f3 and f0 portions into the appropriate files, after comparing with
L0 and L4 reference manuals, even if those are not fully landed yet.
The f0, f30x and l0 have a very similar "v2" adc peripheral.
Start extracting out some of the common code, and fix the glaring bug in
adc_power_down that was affecting them both.
This is not intended to be a fully comprehensive extraction, just the first
easy steps.
The adc peripheral on F30x is the same as F0, L0 and L4. In the reference
manuals, the following names are used.
F3: CFGR (no CFGR2)
F0 and L0: CFGR1 and CFGR2
L4: CFGR and CFGR2
Moving to a single consistent name, that's more likely to be inline with future
part numbers makes it much easier to extract common driver code for the
peripheral.
While all bit defines are moved to the CFGR1 style, core register definitions:
ADC_CFGR(adc) and ADCx_CFGR are kept to match the original register name in the
reference manual.
Fixes Github issue #548
There are as many SMPRx registers are needed for channels supported, and on all
other families, the field definitions are just ADC_SMPR_SMP_XXX. For
consistency, and to avoid any confusion or duplication, use the same style here
too. Drop silly unused per channel definitions that have no purpose.
At least temp sensor, vrefint and vbat/vlcd should have consistent names and
consistent doxygen.
Dropped channel definitions that are the same as the raw number.
Original commits, while appearing clean and tidy, hadn't even been
compile tested. Trust no-one. Not even Scully.
Fixes: 770878e7b4ac12513e121e087261ca0972ba04e6
Fixes: 86d20ef00c00a14d7a4f0b834b9b608b2dd3638a
Fixes: 05ff0df32226dc28e22b98afde07bb886af9ddc9
As done by esden for the F4, remove typedefs and add prefixes to clock enums
This extends this to all stm32 families.
Let's not hide the fact that these variables are structs/enums.
We are filling up the namespace badly enough, we should be prefixing as
much as we can with the module names at least. As users we already run
often enough in namespace colisions we don't have to make it worse.
* CLOCK_3V3_xxx enums renamed to RCC_CLOCK_3V3_xxx
* clock enums (PLL, HSI, HSE ...) prefixed with RCC_
* scale enum of pwr module prefixed with PWR_
Let's not hide the fact that these variables are structs/enums.
We are filling up the namespace badly enough, we should be prefixing as
much as we can with the module names at least. As users we already run
often enough in namespace colisions we don't have to make it worse.
* CLOCK_3V3_xxx enums renamed to RCC_CLOCK_3V3_xxx
* clock enums (PLL, HSI, HSE ...) prefixed with RCC_
* scale enum of pwr module prefixed with PWR_
Just the basic core common functionality gained for free by being a common
peripheral. Enough for a miniblink.
Fixes some errors in the GPIO memory map. ST's naming of AHB2 vs AHB3 is
confusing.
Values from RM0351rev1, with the correction of the duplicate TIM1_CC entry.
Only stub support so far, but this opens up the beginning of build testing.
Many stm32 families have multiple ADC and DAC peripherals. F0 (so far) only
has one. To make it easier to use the same code on many stm32 families,
provide an alias for ADC1 to ADC.
After adding support to the f3, add missing doxygen support to the f0
equivalent. This improves things and keeps them consistent until/if they are
pulled out as common code.
Based on the f0 support, which has identical functionality, but with doxygen
added. Bits renamed as they are only HSE prediv on some targets, and makes
things more consistent with the f0.
Fixes part of github issue #560
