More could probably be found, but this makes some of the basic RCC defines for
the L0 much more inline with other platforms, and much less verbose. This
helps us have more identical code for library users across different targets.
Based on previous work, add a new driver for the v2 usb peripheral found on
stm32f0 and l0 devices.
Correspondingly, add a usb gadget zero test suite for the f0. L0 device level
code isn't yet ready, but will add the test case when it moves in.
Work by Frantisek Burian, Kuldeep
Singh Dhaka, Robin Kreis, fenugrec and zyp on irc, and all those forgotten.
The breaking changes here changes in header location, and changes in driver
name passed down to the usb stack.
Changes affect: stm32f102/f103, stm32l1, and some f3 parts
* instead of the confusingly generic "usb" use the name "st_usbfs" for the USB
Full speed peripheral ST provides in a variety of their stm32 products.
Include directives should change as:
#include <libopencm3/stm32/usb.h> => <libopencm3/stm32/st_usbfs.h>
* instead of the confusingly specific "f103" name for the driver, use
"st_usbfs_v1" [BREAKING_CHANGE]
Instead of:
usbd_init(&stm32f103_usb_driver, .....) ==>
usbd_init(&st_usbfs_v1_usb_driver, .....) ==>
The purpose of these changes is to reduce some confusion around naming, but
primarily to prepare for the "v2" peripheral available on stm32f0/l0 and some
f3 devices.
Work by Frantisek Burian, Kuldeep Singh Dhaka, Robin Kreis, fenugrec and zyp
on irc, and all those forgotten.
* USB host register definitions added.
* Extracted common register and bitfield definitions
from 'otg_fs.h' and 'otg_hs.h'
into new file 'otg_common.h'.
Modified usb low-level drivers to adopt to new style of bitfields.
* Fixed typo OTG_GOTGIN -> OTG_GOTGINT (according to the datasheet)
Signed-off-by: Amir Hammad <amir.hammad@hotmail.com>
The MPU is an implementation option available for both ARMv6-M and ARMv7-M.
Remove poorly merged code that attempted to include this only for cortex m0+.
Added doxygen, updated the definitions of the RBAR register, (though if you're
really using this periperhal, you should be looking at the ref man for further
information)
Reported-by: forrestv on irc.
All STM32 family pwr.h must use LIBOPENCM3_PWR_H as include guard so that
pwr_common.h can detect that it has been referenced by pwr.h for
each family. F2 and F3 had the wrong include guard.
Fixes Github issue #513
This removes the shift from the defines, and includes them in the helper
function, making the code match the documentation, and following how the
rest of the library commonly operates.
Code using the existing defines will continue to work.
Basic helpers to at least support common configurations for the f401.
Original submission specified 5 wait states, but the reference manual and other
reviewers all believe that 2ws is sufficient for these modes.
Signed-off-by: Karl Palsson <karlp@tweak.net.au>
This makes it easier to read for most people, and makes it substantially
easier to review changes in the function signatures themselves at a
later date.
The f3 adc has separate bits for end of conversion and end of sequence.
Support those fully, with the regular enable/disable irq methods, and
the flag checking methods.
Discovered in github bug: #493
This code was copied from the f4, and blindly modified to make it seem
to work. The f3 has separate flags for EOC and EOS, it doesn't use a
second bit to configure what the EOC bit does.
Consequently, update the documentation to correctly indicate that the
EOC bits are only set per conversion.
Discovered in github bug: #493
While there might be other places that are missing this include, this
particular file is clearly missing them, and has resulted in a few separate bug
reports. Fix it right now, in the name of continuous improvement.
Fixes#310 and #427
This adds MCO source selection to some targets, and removes and standardizes
the mask/shift usage for all targets. For devices that support MCO2, this
supports only MCO1. No attempt has been made to extract MCO prescaler, which
is not available on all F1 and F3.
This commit implements the support for one interface to have multiple
altsettings. It also adds hook that user can use to perform actions
when the alsetting switch is performed by host.
Changes:
* For backward compatibility, placed a pointer instead of allocating memory for whole interface struct.
* Always execute callback (even if the current interface alternate-settings matches).
* Multiple configuration support.
Signed-off-by: Kuldeep Singh Dhaka <kuldeepdhaka9@gmail.com>
When writing the USB endpoint register, USB_EP_RX_CTR (bit 15) and
USB_EP_TX_CTR (bit 7) should be set to avoid inadvertently clearing
either bit.
Prior to this patch end points could indefinately stall if the hardware
changed these bits between the time they are read and when they were
written.
Signed-off-by: George McCollister <george.mccollister@gmail.com>
Added CLR_REG_BIT_MSK_AND_SET and TOG_SET_REG_BIT_MSK_AND_SET because we
need version of CLR_REG_BIT_MSK and TOG_SET_REG_BIT_MSK that allow us to
OR in bits before the register is written.
Signed-off-by: George McCollister <george.mccollister@gmail.com>
