This code was copied from the f4, and blindly modified to make it seem
to work. The f3 has separate flags for EOC and EOS, it doesn't use a
second bit to configure what the EOC bit does.
Consequently, update the documentation to correctly indicate that the
EOC bits are only set per conversion.
Discovered in github bug: #493
While there might be other places that are missing this include, this
particular file is clearly missing them, and has resulted in a few separate bug
reports. Fix it right now, in the name of continuous improvement.
Fixes#310 and #427
This adds MCO source selection to some targets, and removes and standardizes
the mask/shift usage for all targets. For devices that support MCO2, this
supports only MCO1. No attempt has been made to extract MCO prescaler, which
is not available on all F1 and F3.
This commit implements the support for one interface to have multiple
altsettings. It also adds hook that user can use to perform actions
when the alsetting switch is performed by host.
Changes:
* For backward compatibility, placed a pointer instead of allocating memory for whole interface struct.
* Always execute callback (even if the current interface alternate-settings matches).
* Multiple configuration support.
Signed-off-by: Kuldeep Singh Dhaka <kuldeepdhaka9@gmail.com>
When writing the USB endpoint register, USB_EP_RX_CTR (bit 15) and
USB_EP_TX_CTR (bit 7) should be set to avoid inadvertently clearing
either bit.
Prior to this patch end points could indefinately stall if the hardware
changed these bits between the time they are read and when they were
written.
Signed-off-by: George McCollister <george.mccollister@gmail.com>
Added CLR_REG_BIT_MSK_AND_SET and TOG_SET_REG_BIT_MSK_AND_SET because we
need version of CLR_REG_BIT_MSK and TOG_SET_REG_BIT_MSK that allow us to
OR in bits before the register is written.
Signed-off-by: George McCollister <george.mccollister@gmail.com>
Provides all of the config descriptors for MIDI class devices together
with a sub-set of the audio class sufficient to put together a full
fledged MIDI device.
Extends struct usb_endpoint_descriptor to make it possible to provide
the USB host with class-specific extensions to endpoint descriptors.
The approach taken, based on extra and extralen and removing the sizeof()
from USB_DT_ENDPOINT_SIZE, is identical to the approach used to add
class-specific extensions to interface descriptors. All libopencm3-examples
use the USB_DT_ENDPOINT_SIZE (rather than directly using sizeof) so there
should be no compatibility problems resulting from this change.
Rename rcc_ppre1_frequency and rcc_ppre2_frequency to rcc_apb1_frequency and rcc_apb2_frequency
Also add rcc_ahb_frequency (although it is not set correctly in all cases) which will be fixed by
the rcc commits later. Also fixup the only use in the library of these variables, the USART code.
And fix the typos that resulted
Make l1 generic too
Pulls out duplicate calls from f0/rcc.c and uses the common version which
also means that f0 can use rcc_peripheral_enable() now which is in common
but not the old rcc versions.
Tested with a miniblink example on the l053 discovery board.
Only register definitions at this stage, no helpers.
Register definitions from RM0367r2, hopefully the biggest
superset of L0 parts.
Signed-off-by: Karl Palsson <karlp@tweak.net.au>
F100 has more remap options than F10x, particularly on the High Density
devices.
Fixes github issue #365
Signed-off-by: Karl Palsson <karlp@tweak.net.au>
The bits definitions for direct manipulation were missing, and should be
present for completeness. However, this only affects the legacy (error prone)
API, replaced some time ago.
old and error prone: (stop using code like this)
rcc_peripheral_enable_clock(&RCC_APB2ENR, RCC_APB2ENR_TIM16EN);
rcc_peripheral_reset(&RCC_APB2RSTR, RCC_APB2RSTR_TIM16RST);
new:
rcc_periph_clock_enable(RCC_TIM16);
rcc_periph_reset_{pulse,hold,release}(RCC_TIM16);
Fixes github issue #361
