We extracted code out to the common files, but they weren't being
linked. This didn't matter in the past, as they were empty.
Fixes: 46d4103c stm32: flash: move wait_for_last to f2/f4 explicitly.
Fixes: https://github.com/libopencm3/libopencm3/issues/953
This shows what is _actually_ different for f7. A couple of option
bits, and a renaming of bit 7 of the status register, from Program
Sequence Error to Erase Sequence Error.
We keep the separate implementation of wait_for_last_operation, to meet
the "suggestions" of the reference manual to insert a DSB instruction.
Keeping the renamed bit/functions also requires us to keep separate
implementations of the flag clearing functions
Turns out, there's lots of common code for flash. Pull up prefetch
on/off to start with, as there's only a single bit name different.
Pull up the definitions of common API functions too, starting with
flash_set_ws. Even if the implementations are different, things that
meant to be the same, should be defined centrally.
- Change .power_save to .voltage_scale, a pwr_vos_scale enum
- Enable pwr clock before setting VOS scale
- Fix flash wait states
- Make flash_set_ws more robust
Only applied to STM32 doc trees at present.
Instead of declaring a group for "STM32blah" in the doc-blah.h files,
and then trying to put all the common+specific peripheral code into
those groups, (which is what led to the stub doxygen holder empty .c
files) Just use a standard name like "Peripheral APIS" and place
everything into that.
Demonstrated by converting ADC and USART peripherals, which is
definitely not complete, but it shows how to make things less magical,
and less prone to copy/paste errors. Now, you can copy/paste and it
will do the right thing, because everyone uses the same group names.
This is also how to unify the mix of "STM32blah->Periphblah" and _also_
the dangling "periph_file" modules in doxygen, it merges them together
properly, as they're intended to be really.
On some targets these weren't even being referenced, on others they
were, in all cases they were empty and contributed no value.
They _actually_ served to declare groupings for doxygen, but we can do
that in a different manner, without having to have dummy files around.
split spi stuff in three part:
- v1 : basic spi peripheral
- v1_frf : v1 spi with frf mode additional bit in spi_cr2 / spi_sr
- v2 : spi with variable datasize, fifo and other fancy stuff.
v1 maps to f1 chips
v1_frf to f2, f4 and l0,l1
v2 to f0, f3 and l4
This breaks spi_master_init API for v2 devices : function prototype from
common spi header used to be abused, with DFF bit reused for CRCL bit.
New v2 spi_master_init does not handle anymore CRCL bits, as it does not
usually mess with other crc configuration.
Instead of every "simple" target having their own duplicate file with
all the section mappings, just provide a single, simple,
"cortex-m-generic.ld" that works with our startup code and any simple
rom/ram system. This also drops the pointless copying of files all over
the place. Using -L flags properly is sufficient, and the standard file
is now in the root of the library already.
The stm32fx07 is common DesignWare IP, used in both STM32 and EFM32 chips.
Rename the files to make this more clear, and easier to use in other
targets.
rcc_osc_bypass_enable and rcc_osc_bypass_disable have been copy/pasted
around for the last time! There's a compile bit to check for L0/L1, but
otherwise this is just code duplication for no gain.
The f1, f2, f4, l1 chip families have a similar "v1" i2c peripheral on board.
More recent f0, f3, l0, l3 chip families share another "v2" version of i2c.
This patch unifies headers and implementation for two types of i2c peripherals:
- rename: i2c_common_all.[ch] to i2c_common_v1.[ch]
- remove i2c_common_f24.h: extra I2C blocks are defined in specific headers
- use f3 i2c code as a basis for common "v2" i2c implementation
- add f0 i2c support: use "v2" i2c implementation
Tests:
- tested on a custom f0 board
- compile-tested both libopencm3 and libopencm3-examples for all stm32
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Fixes: 57c2b00a69f97205313e1c7ab8116ee1893b231e
There was an issue with the pllp value calculation where the masking was done
in the wrong place. The pllp value was always equivalent to 2 (the bits were
always set to 0b00) which could result in an undesired system clock frequency.
Start providing async routines for all blocking routines, to make it
easier to use libopencm3 in some RTOS environments. This is not in
anyway intended to be complete, this just covers a single blocking
routine, rcc_wait_for_osc_ready. Documentation added to the top level,
and provided for all stm32 families.
This is common code for f0234, keep renaming files as has become standard, even
if it's a suboptimal solution. This doesn't rename the header which was not
renamed for f3.
Reported-by: https://github.com/gtoonstra
Original implementation only checked whether the user had _selected_ the
clock, not whether it had actually switched to the clock or not. For
almost all cases, this made this function either a no-op, if you _had_
selected the clock, or a blocking loop if you hadn't selected it ahead
of time.
Fixes github issue #687
Let's not hide the fact that these variables are structs/enums.
We are filling up the namespace badly enough, we should be prefixing as
much as we can with the module names at least. As users we already run
often enough in namespace colisions we don't have to make it worse.
* CLOCK_3V3_xxx enums renamed to RCC_CLOCK_3V3_xxx
* clock enums (PLL, HSI, HSE ...) prefixed with RCC_
* scale enum of pwr module prefixed with PWR_
The filename has always been wrong, "6" is a temperature grade, but f405 and
f407 are in the same datasheet, and all have the 64k CCM. Add it to the linker
script.
Renamed every instance of variable CFLAGS in target specific Makefiles
to TGT_CFLAGS to free up CFLAGS for user defined compiler flags.
Added information in README.md about existence and usage of CFLAGS
environment variable in build process.
Basic helpers to at least support common configurations for the f401.
Original submission specified 5 wait states, but the reference manual and other
reviewers all believe that 2ws is sufficient for these modes.
Signed-off-by: Karl Palsson <karlp@tweak.net.au>
-ggdb3 make slightly bigger .elf files, but allows gdb to understand
macros, which libopenocm3 uses somewhat extensively. Make this the
default, and pull it up to the common base makefile, so it can be easily
substituted.
Rename rcc_ppre1_frequency and rcc_ppre2_frequency to rcc_apb1_frequency and rcc_apb2_frequency
Also add rcc_ahb_frequency (although it is not set correctly in all cases) which will be fixed by
the rcc commits later. Also fixup the only use in the library of these variables, the USART code.
And fix the typos that resulted
Make l1 generic too
to remove variations, redundancies, add missing, fix errors. All c files
refer only to the dispatch style headers in /include/stm32. Those headers
#include memorymap.h and cm3/common.h. All references to
these are removed from the family specific headers. Ethernet untouched as
it appears incomplete.
Added dummy spi.c for F0/F3. Fix some doxygen anomalies.
