The adc v2 periph has the same register map, but comes in two flavours, one
supporting injected channels, more watchdogs, per channel sampling times and
so on, and one "simple" version.
Pull up the f3 and f0 portions into the appropriate files, after comparing with
L0 and L4 reference manuals, even if those are not fully landed yet.
The f0, f30x and l0 have a very similar "v2" adc peripheral.
Start extracting out some of the common code, and fix the glaring bug in
adc_power_down that was affecting them both.
This is not intended to be a fully comprehensive extraction, just the first
easy steps.
The adc peripheral on F30x is the same as F0, L0 and L4. In the reference
manuals, the following names are used.
F3: CFGR (no CFGR2)
F0 and L0: CFGR1 and CFGR2
L4: CFGR and CFGR2
Moving to a single consistent name, that's more likely to be inline with future
part numbers makes it much easier to extract common driver code for the
peripheral.
While all bit defines are moved to the CFGR1 style, core register definitions:
ADC_CFGR(adc) and ADCx_CFGR are kept to match the original register name in the
reference manual.
Fixes Github issue #548
As done by esden for the F4, remove typedefs and add prefixes to clock enums
This extends this to all stm32 families.
Let's not hide the fact that these variables are structs/enums.
We are filling up the namespace badly enough, we should be prefixing as
much as we can with the module names at least. As users we already run
often enough in namespace colisions we don't have to make it worse.
* CLOCK_3V3_xxx enums renamed to RCC_CLOCK_3V3_xxx
* clock enums (PLL, HSI, HSE ...) prefixed with RCC_
* scale enum of pwr module prefixed with PWR_
Based on the f0 support, which has identical functionality, but with doxygen
added. Bits renamed as they are only HSE prediv on some targets, and makes
things more consistent with the f0.
Fixes part of github issue #560
This function was badly copied and pasted from the f4 library, where there are
two functions, rcc_set_main_pll_hsi and rcc_set_main_pll_hse which combine
source, multipliers, dividers and other pll factors.
On F3, (not all of them, but the ones we support now), the function as
implemented has nothing to do with hsi / hse, and instead is simply selecting
the PLL multiplier.
Copypasta from f4 rcc code was only modified to shift the result, but not clear
the existing settings properly. Add mask/shift definitions and use them
properly.
Renamed every instance of variable CFLAGS in target specific Makefiles
to TGT_CFLAGS to free up CFLAGS for user defined compiler flags.
Added information in README.md about existence and usage of CFLAGS
environment variable in build process.
The breaking changes here changes in header location, and changes in driver
name passed down to the usb stack.
Changes affect: stm32f102/f103, stm32l1, and some f3 parts
* instead of the confusingly generic "usb" use the name "st_usbfs" for the USB
Full speed peripheral ST provides in a variety of their stm32 products.
Include directives should change as:
#include <libopencm3/stm32/usb.h> => <libopencm3/stm32/st_usbfs.h>
* instead of the confusingly specific "f103" name for the driver, use
"st_usbfs_v1" [BREAKING_CHANGE]
Instead of:
usbd_init(&stm32f103_usb_driver, .....) ==>
usbd_init(&st_usbfs_v1_usb_driver, .....) ==>
The purpose of these changes is to reduce some confusion around naming, but
primarily to prepare for the "v2" peripheral available on stm32f0/l0 and some
f3 devices.
Work by Frantisek Burian, Kuldeep Singh Dhaka, Robin Kreis, fenugrec and zyp
on irc, and all those forgotten.
The f3 adc has separate bits for end of conversion and end of sequence.
Support those fully, with the regular enable/disable irq methods, and
the flag checking methods.
Discovered in github bug: #493
This code was copied from the f4, and blindly modified to make it seem
to work. The f3 has separate flags for EOC and EOS, it doesn't use a
second bit to configure what the EOC bit does.
Consequently, update the documentation to correctly indicate that the
EOC bits are only set per conversion.
Discovered in github bug: #493
-ggdb3 make slightly bigger .elf files, but allows gdb to understand
macros, which libopenocm3 uses somewhat extensively. Make this the
default, and pull it up to the common base makefile, so it can be easily
substituted.
Rename rcc_ppre1_frequency and rcc_ppre2_frequency to rcc_apb1_frequency and rcc_apb2_frequency
Also add rcc_ahb_frequency (although it is not set correctly in all cases) which will be fixed by
the rcc commits later. Also fixup the only use in the library of these variables, the USART code.
And fix the typos that resulted
Make l1 generic too
All methods in this file are in either
* common/gpio_common_all.c
* common/gpio_common_f0234.c
Those other files have better doxygen commentary, this file should never
have been added.
to remove variations, redundancies, add missing, fix errors. All c files
refer only to the dispatch style headers in /include/stm32. Those headers
#include memorymap.h and cm3/common.h. All references to
these are removed from the family specific headers. Ethernet untouched as
it appears incomplete.
Added dummy spi.c for F0/F3. Fix some doxygen anomalies.
On linux, the output of CP rule was try to write to / which is - of course, forbidden for write.
This solution adds to each part of lib correct pointer to the root of lib where the libs should be written.
Bug found by Kuldeep Singh Dhaka.
So that the navigation pane works correctly in browsers.
Some additional doc fixes put in where found (but many more still to go).
Added some dummy .c and .h files to bring the associated docs into line.
makefile changed to allow 'make html' as well as 'make doc' (the latter only does html anyway).
According to RM0090, page 301, paragraph 11.13.12 Note. (For F4, for F1 and F3 is it in the corresponding manuals)
The JSQR are filled always ending at SQR4 ie for those lists we must set this list:
(A) -> JSQ4 = A,
(A,B) -> JSQ3 = A, JSQ4 = B,
(A,B,C) -> JSQ2 = A, JSQ3 = B, JSQ4 = C,
(A,B,C,D) -> JSQ1 = A, JSQ2 = B, JSQ3 = C, JSQ4 = D,
The readed values are in correct order, starting from JDR1:
(A) -> JDR1 = A,
(A,B) -> JDR1 = A, JDR2 = B,
(A,B,C) -> JDR1 = A, JDR2 = B, JDR3 = C,
(A,B,C,D) -> JDR1 = A, JDR2 = B, JDR3 = C, JDR4 = D,
We currently default to "-mfloat-abi=hard -mfpu=fpv4-sp-d16" for M4F cores, and
and variations of "-mfloat-abi=soft" for the others. Keep the M4F default, and
move others to no FP flags for consistency, but allow overriding these flags
via the FP_FLAGS environment variable.
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
