stm32f0, l3, l4 are currently sharing the same duplicated header, and
stm32l0 uses the same peripheral. Stop copy-pasting stuff and centralize
definitions into a iwdg_common_v2.h header.
Final chunk of register definitions to be pulled up.
Now the "target" files are _only_ defining the list of u(s)arts
available, and any _specific_ functions for that target.
Just small pieces at a time to make it easy to see what's happening.
Taking definitions currently implemented in both f0/f3 headers and
making combined, documented versions in the -v2 header.
Instead of declaring that _every_ device has USART1,2,3 and UART4,5, let
the targets themselves define what periphs they do, along with their
USARTx_BASE defines, and let the common headers just have the common
abstractions.
Similar to how we have abstract defines for the stop bits, parity and
flow control common mode namees, provide abstract flag names for the
"standard" flags. This allows us to start using common API code for v1
and v2 uarts
For stm32f3, drop the "compatibility" defines that simply pollute the
namespace, making it confusingly appear as if f3 has both SR and ISR
registers.
Only pulling out the _common_ stuff. This is a single step in a long
process of eliminating all the duplication and "same, but different"
implementations that are stalling adding nice clean easy support for
l0/f7/l4.
This _ignores_ all currently conflict register definitions, even if they
"do the same thing" it just pulls up the common stuff. A subsequent
commit can look at resolving the implementatations to a single version.
rcc_osc_bypass_enable and rcc_osc_bypass_disable have been copy/pasted
around for the last time! There's a compile bit to check for L0/L1, but
otherwise this is just code duplication for no gain.
The f1, f2, f4, l1 chip families have a similar "v1" i2c peripheral on board.
More recent f0, f3, l0, l3 chip families share another "v2" version of i2c.
This patch unifies headers and implementation for two types of i2c peripherals:
- rename: i2c_common_all.[ch] to i2c_common_v1.[ch]
- remove i2c_common_f24.h: extra I2C blocks are defined in specific headers
- use f3 i2c code as a basis for common "v2" i2c implementation
- add f0 i2c support: use "v2" i2c implementation
Tests:
- tested on a custom f0 board
- compile-tested both libopencm3 and libopencm3-examples for all stm32
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Some parts used HSICLK, some used HSI. Most used NOCLK, f3 used
DISABLED. Try and move all to the shorter, simpler forms, instead of
having mixed defines for different targets for the same thing. Just
because the bits themselves are different doesn't mean we should make it
more difficult for users to port code.
Original implementation only checked whether the user had _selected_ the
clock, not whether it had actually switched to the clock or not. For
almost all cases, this made this function either a no-op, if you _had_
selected the clock, or a blocking loop if you hadn't selected it ahead
of time.
Fixes github issue #687
This reverts commit aa5e108553ace3079c6087dec796b9e58fe45fa4.
This commit was not meant to land yet, it should have gone for review, and
doesn't yet include all the parts it should touch.
replace bulky hardcoded wait for set and wait for clear with a single asynch
routine. Leave the blocking routines in for compatibility at this point.
NOUP: should be added to other rcc.c files too.
L4 and F3 actually have the same bits to write in the same order, but F3 hides
the name of the deep power down bit. Keep the like that for now, but there's a
standard API for enabling and disabling the regulator.
The adc v2 periph has the same register map, but comes in two flavours, one
supporting injected channels, more watchdogs, per channel sampling times and
so on, and one "simple" version.
Pull up the f3 and f0 portions into the appropriate files, after comparing with
L0 and L4 reference manuals, even if those are not fully landed yet.
The f0, f30x and l0 have a very similar "v2" adc peripheral.
Start extracting out some of the common code, and fix the glaring bug in
adc_power_down that was affecting them both.
This is not intended to be a fully comprehensive extraction, just the first
easy steps.
The adc peripheral on F30x is the same as F0, L0 and L4. In the reference
manuals, the following names are used.
F3: CFGR (no CFGR2)
F0 and L0: CFGR1 and CFGR2
L4: CFGR and CFGR2
Moving to a single consistent name, that's more likely to be inline with future
part numbers makes it much easier to extract common driver code for the
peripheral.
While all bit defines are moved to the CFGR1 style, core register definitions:
ADC_CFGR(adc) and ADCx_CFGR are kept to match the original register name in the
reference manual.
Fixes Github issue #548
There are as many SMPRx registers are needed for channels supported, and on all
other families, the field definitions are just ADC_SMPR_SMP_XXX. For
consistency, and to avoid any confusion or duplication, use the same style here
too. Drop silly unused per channel definitions that have no purpose.
At least temp sensor, vrefint and vbat/vlcd should have consistent names and
consistent doxygen.
Dropped channel definitions that are the same as the raw number.
Original commits, while appearing clean and tidy, hadn't even been
compile tested. Trust no-one. Not even Scully.
Fixes: 770878e7b4ac12513e121e087261ca0972ba04e6
Fixes: 86d20ef00c00a14d7a4f0b834b9b608b2dd3638a
Fixes: 05ff0df32226dc28e22b98afde07bb886af9ddc9
As done by esden for the F4, remove typedefs and add prefixes to clock enums
This extends this to all stm32 families.
Let's not hide the fact that these variables are structs/enums.
We are filling up the namespace badly enough, we should be prefixing as
much as we can with the module names at least. As users we already run
often enough in namespace colisions we don't have to make it worse.
* CLOCK_3V3_xxx enums renamed to RCC_CLOCK_3V3_xxx
* clock enums (PLL, HSI, HSE ...) prefixed with RCC_
* scale enum of pwr module prefixed with PWR_
Based on the f0 support, which has identical functionality, but with doxygen
added. Bits renamed as they are only HSE prediv on some targets, and makes
things more consistent with the f0.
Fixes part of github issue #560
