- match the same logic as the f0 api
- use ADC_CFGR1_AWD1CH_VAL macro to mask the channel bits
- don't check if channel is < 18q
- enable the awd in addition to setting the selection to single channel monitoring (in following with the signature and @brief 'enable'
Only applied to STM32 doc trees at present.
Instead of declaring a group for "STM32blah" in the doc-blah.h files,
and then trying to put all the common+specific peripheral code into
those groups, (which is what led to the stub doxygen holder empty .c
files) Just use a standard name like "Peripheral APIS" and place
everything into that.
Demonstrated by converting ADC and USART peripherals, which is
definitely not complete, but it shows how to make things less magical,
and less prone to copy/paste errors. Now, you can copy/paste and it
will do the right thing, because everyone uses the same group names.
This is also how to unify the mix of "STM32blah->Periphblah" and _also_
the dangling "periph_file" modules in doxygen, it merges them together
properly, as they're intended to be really.
The ADC v2 peripheral doesn't have the same behaviour of starting, where
the hardware clears the bit immediately, on v2, it is not cleared until
the ADC is stopped, or the end of sequence flag is set.
Fixes https://github.com/libopencm3/libopencm3/issues/557
These functions have existed since the initial commit, fallout from
copying an existing file and then trying to implement functions as
needed. F3 ADC doesn't have corresponding functions for some of these,
and this dead code should never have landed. Dropping it for clarity,
and also to stop confusing doxygen.
The adc v2 periph has the same register map, but comes in two flavours, one
supporting injected channels, more watchdogs, per channel sampling times and
so on, and one "simple" version.
Pull up the f3 and f0 portions into the appropriate files, after comparing with
L0 and L4 reference manuals, even if those are not fully landed yet.
The f0, f30x and l0 have a very similar "v2" adc peripheral.
Start extracting out some of the common code, and fix the glaring bug in
adc_power_down that was affecting them both.
This is not intended to be a fully comprehensive extraction, just the first
easy steps.
The adc peripheral on F30x is the same as F0, L0 and L4. In the reference
manuals, the following names are used.
F3: CFGR (no CFGR2)
F0 and L0: CFGR1 and CFGR2
L4: CFGR and CFGR2
Moving to a single consistent name, that's more likely to be inline with future
part numbers makes it much easier to extract common driver code for the
peripheral.
While all bit defines are moved to the CFGR1 style, core register definitions:
ADC_CFGR(adc) and ADCx_CFGR are kept to match the original register name in the
reference manual.
Fixes Github issue #548
The f3 adc has separate bits for end of conversion and end of sequence.
Support those fully, with the regular enable/disable irq methods, and
the flag checking methods.
Discovered in github bug: #493
This code was copied from the f4, and blindly modified to make it seem
to work. The f3 has separate flags for EOC and EOS, it doesn't use a
second bit to configure what the EOC bit does.
Consequently, update the documentation to correctly indicate that the
EOC bits are only set per conversion.
Discovered in github bug: #493
to remove variations, redundancies, add missing, fix errors. All c files
refer only to the dispatch style headers in /include/stm32. Those headers
#include memorymap.h and cm3/common.h. All references to
these are removed from the family specific headers. Ethernet untouched as
it appears incomplete.
Added dummy spi.c for F0/F3. Fix some doxygen anomalies.
According to RM0090, page 301, paragraph 11.13.12 Note. (For F4, for F1 and F3 is it in the corresponding manuals)
The JSQR are filled always ending at SQR4 ie for those lists we must set this list:
(A) -> JSQ4 = A,
(A,B) -> JSQ3 = A, JSQ4 = B,
(A,B,C) -> JSQ2 = A, JSQ3 = B, JSQ4 = C,
(A,B,C,D) -> JSQ1 = A, JSQ2 = B, JSQ3 = C, JSQ4 = D,
The readed values are in correct order, starting from JDR1:
(A) -> JDR1 = A,
(A,B) -> JDR1 = A, JDR2 = B,
(A,B,C) -> JDR1 = A, JDR2 = B, JDR3 = C,
(A,B,C,D) -> JDR1 = A, JDR2 = B, JDR3 = C, JDR4 = D,
